Hello James,
On Fri, Mar 29, 2019 at 01:21:12PM -0700, James Smart wrote:
>
>
> On 11/21/2018 5:42 PM, Jens Axboe wrote:
> > On 11/21/18 6:00 PM, Ming Lei wrote:
> > > On Wed, Nov 21, 2018 at 02:47:35PM -0700, Jens Axboe wrote:
> > > > On 11/14/18 8:20 AM, Jens Axboe wrote:
> > > > > On 11/14/18 1:25 AM, Ming Lei wrote:
> > > > > > c2856ae2f315d ("blk-mq: quiesce queue before freeing queue") has
> > > > > > already fixed this race, however the implied synchronize_rcu()
> > > > > > in blk_mq_quiesce_queue() can slow down LUN probe a lot, so caused
> > > > > > performance regression.
> > > > > >
> > > > > > Then 1311326cf4755c7 ("blk-mq: avoid to synchronize rcu inside blk_cleanup_queue()")
> > > > > > tried to quiesce queue for avoiding unnecessary synchronize_rcu()
> > > > > > only when queue initialization is done, because it is usual to see
> > > > > > lots of inexistent LUNs which need to be probed.
> > > > > >
> > > > > > However, turns out it isn't safe to quiesce queue only when queue
> > > > > > initialization is done. Because when one SCSI command is completed,
> > > > > > the user of sending command can be waken up immediately, then the
> > > > > > scsi device may be removed, meantime the run queue in scsi_end_request()
> > > > > > is still in-progress, so kernel panic can be caused.
> > > > > >
> > > > > > In Red Hat QE lab, there are several reports about this kind of kernel
> > > > > > panic triggered during kernel booting.
> > > > > >
> > > > > > This patch tries to address the issue by grabing one queue usage
> > > > > > counter during freeing one request and the following run queue.
> > > > > Thanks applied, this bug was elusive but ever present in recent
> > > > > testing that we did internally, it's been a huge pain in the butt.
> > > > > The symptoms were usually a crash in blk_mq_get_driver_tag() with
> > > > > hctx->tags == NULL, or a crash inside deadline request insert off
> > > > > requeue.
>
> All,
>
> We are seeing errors with the following error:
>
> [44492.814347] BUG: unable to handle kernel NULL pointer dereference at
> (null)
> [44492.814383] IP: [<ffffffff8135a10b>] sbitmap_any_bit_set+0xb/0x30
> ...
> [44492.815634] Call Trace:
> [44492.815652] [<ffffffff81303a88>] blk_mq_run_hw_queues+0x48/0x90
> [44492.819755] [<ffffffff813053cc>] blk_mq_requeue_work+0x10c/0x120
> [44492.819777] [<ffffffff81098cb4>] process_one_work+0x154/0x410
> [44492.819781] [<ffffffff81099896>] worker_thread+0x116/0x4a0
> [44492.819784] [<ffffffff8109edb9>] kthread+0xc9/0xe0
> [44492.819790] [<ffffffff81619b05>] ret_from_fork+0x55/0x80
> [44492.822798] DWARF2 unwinder stuck at ret_from_fork+0x55/0x80
> [44492.822798]
> [44492.822799] Leftover inexact backtrace:
>
> [44492.822802] [<ffffffff8109ecf0>] ? kthread_park+0x50/0x50
> [44492.822818] Code: c6 44 0f 46 ce 83 c2 01 45 89 ca 4c 89 54 01 08 48 8b
> 4f
> 10 2b 74 01 08 39 57 08 77 d8 f3 c3 90 8b 4f 08 85 c9 74 1f 48 8b 57 10 <48>
> 83
> 3a 00 75 18 31 c0 eb 0a 48 83 c2 40 48 83 3a 00 75 0a 83
> [44492.822820] RIP [<ffffffff8135a10b>] sbitmap_any_bit_set+0xb/0x30
> [44492.822821] RSP <ffff8807219ffdd8>
> [44492.822821] CR2: 0000000000000000
>
> It appears the queue has been freed thus the bitmap is bad.
Could you provide a little background about this report? Such as the
device/driver, reproduction steps, and kernel release.
>
> Looking at the commit relative to this email thread:
> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/drivers/scsi/scsi_lib.c?id=8dc765d438f1e42b3e8227b3b09fad7d73f4ec9a
>
> It's interesting that the queue reference taken was released after the
> kblockd_schedule_work() call was made, and it's this work element that is
> hitting the issue. So perhaps the patch missed keeping the reference until
> the requeue_work item finished ?
blk_mq's requeue_work is supposed to be drained before freeing queue,
see blk_sync_queue(), and SCSI's requeue_work should have been drained too.
This following change might make a difference for this issue, but looks
it isn't good enough, given SCSI's requeue may come between
cancel_work_sync() and blk_cleanup_queue(). Will take a close look on it
in this weekend.
diff --git a/drivers/scsi/scsi_sysfs.c b/drivers/scsi/scsi_sysfs.c
index 6a9040faed00..94882f65ccf1 100644
--- a/drivers/scsi/scsi_sysfs.c
+++ b/drivers/scsi/scsi_sysfs.c
@@ -1397,8 +1397,8 @@ void __scsi_remove_device(struct scsi_device *sdev)
scsi_device_set_state(sdev, SDEV_DEL);
mutex_unlock(&sdev->state_mutex);
- blk_cleanup_queue(sdev->request_queue);
cancel_work_sync(&sdev->requeue_work);
+ blk_cleanup_queue(sdev->request_queue);
if (sdev->host->hostt->slave_destroy)
sdev->host->hostt->slave_destroy(sdev);
Thanks,
Ming
