4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
commit 56b5d4ea778c1b0989c5cdb5406d4a488144c416 upstream.
LDO35 uses 25 mV step, not 50 mV. Bucks 7 and 8 use 12.5 mV step
instead of 6.25 mV. Wrong step caused over-voltage (LDO35) or
under-voltage (buck7 and 8) if regulators were used (e.g. on Exynos5420
Arndale Octa board).
Cc: <stable@xxxxxxxxxxxxxxx>
Fixes: cb74685ecb39 ("regulator: s2mps11: Add samsung s2mps11 regulator driver")
Signed-off-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
Signed-off-by: Mark Brown <broonie@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/regulator/s2mps11.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/drivers/regulator/s2mps11.c
+++ b/drivers/regulator/s2mps11.c
@@ -363,7 +363,7 @@ static const struct regulator_desc s2mps
regulator_desc_s2mps11_ldo(32, STEP_50_MV),
regulator_desc_s2mps11_ldo(33, STEP_50_MV),
regulator_desc_s2mps11_ldo(34, STEP_50_MV),
- regulator_desc_s2mps11_ldo(35, STEP_50_MV),
+ regulator_desc_s2mps11_ldo(35, STEP_25_MV),
regulator_desc_s2mps11_ldo(36, STEP_50_MV),
regulator_desc_s2mps11_ldo(37, STEP_50_MV),
regulator_desc_s2mps11_ldo(38, STEP_50_MV),
@@ -373,8 +373,8 @@ static const struct regulator_desc s2mps
regulator_desc_s2mps11_buck1_4(4),
regulator_desc_s2mps11_buck5,
regulator_desc_s2mps11_buck67810(6, MIN_600_MV, STEP_6_25_MV),
- regulator_desc_s2mps11_buck67810(7, MIN_600_MV, STEP_6_25_MV),
- regulator_desc_s2mps11_buck67810(8, MIN_600_MV, STEP_6_25_MV),
+ regulator_desc_s2mps11_buck67810(7, MIN_600_MV, STEP_12_5_MV),
+ regulator_desc_s2mps11_buck67810(8, MIN_600_MV, STEP_12_5_MV),
regulator_desc_s2mps11_buck9,
regulator_desc_s2mps11_buck67810(10, MIN_750_MV, STEP_12_5_MV),
};
