5.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Cody P Schafer <dev@xxxxxxxxxx>
commit 46c039d06b6ecabb94bd16c3a999b28dc83b79ce upstream.
Without this, we get failures like this when the kernel attempts to
initialize a cx231xx device:
[16046.153653] cx231xx 3-1.2:1.1: New device Hauppauge Hauppauge Device @ 480 Mbps (2040:c200) with 6 interfaces
[16046.153900] cx231xx 3-1.2:1.1: can't change interface 3 alt no. to 3: Max. Pkt size = 0
[16046.153907] cx231xx 3-1.2:1.1: Identified as Hauppauge USB Live 2 (card=9)
[16046.154350] i2c i2c-11: Added multiplexed i2c bus 13
[16046.154379] i2c i2c-11: Added multiplexed i2c bus 14
[16046.267194] cx25840 10-0044: cx23102 A/V decoder found @ 0x88 (cx231xx #0-0)
[16048.424551] cx25840 10-0044: loaded v4l-cx231xx-avcore-01.fw firmware (16382 bytes)
[16048.463224] cx231xx 3-1.2:1.1: v4l2 driver version 0.0.3
[16048.567878] cx231xx 3-1.2:1.1: Registered video device video2 [v4l2]
[16048.568001] cx231xx 3-1.2:1.1: Registered VBI device vbi0
[16048.568419] cx231xx 3-1.2:1.1: audio EndPoint Addr 0x83, Alternate settings: 3
[16048.568425] cx231xx 3-1.2:1.1: video EndPoint Addr 0x84, Alternate settings: 5
[16048.568431] cx231xx 3-1.2:1.1: VBI EndPoint Addr 0x85, Alternate settings: 2
[16048.568436] cx231xx 3-1.2:1.1: sliced CC EndPoint Addr 0x86, Alternate settings: 2
[16048.568448] usb 3-1.2: couldn't get decoder output pad for V4L I/O
[16048.568453] cx231xx 3-1.2:1.1: V4L2 device vbi0 deregistered
[16048.568579] cx231xx 3-1.2:1.1: V4L2 device video2 deregistered
[16048.569001] cx231xx: probe of 3-1.2:1.1 failed with error -22
Likely a regession since Commit 9d6d20e652c0
("media: v4l2-mc: switch it to use the new approach to setup pipelines")
(v4.19-rc1-100-g9d6d20e652c0), which introduced the use of
PAD_SIGNAL_DV within v4l2_mc_create_media_graph().
This also modifies cx25840 to remove the VBI pad, matching the action
taken in Commit 092a37875a22 ("media: v4l2: remove VBI output pad").
Fixes: 9d6d20e652c0 ("media: v4l2-mc: switch it to use the new approach to setup pipelines")
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Cody P Schafer <dev@xxxxxxxxxx>
Tested-by: Hans Verkuil <hverkuil-cisco@xxxxxxxxx>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xxxxxxxxx>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/media/i2c/cx25840/cx25840-core.c | 3 ++-
drivers/media/i2c/cx25840/cx25840-core.h | 1 -
2 files changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/media/i2c/cx25840/cx25840-core.c
+++ b/drivers/media/i2c/cx25840/cx25840-core.c
@@ -5216,8 +5216,9 @@ static int cx25840_probe(struct i2c_clie
* those extra inputs. So, let's add it only when needed.
*/
state->pads[CX25840_PAD_INPUT].flags = MEDIA_PAD_FL_SINK;
+ state->pads[CX25840_PAD_INPUT].sig_type = PAD_SIGNAL_ANALOG;
state->pads[CX25840_PAD_VID_OUT].flags = MEDIA_PAD_FL_SOURCE;
- state->pads[CX25840_PAD_VBI_OUT].flags = MEDIA_PAD_FL_SOURCE;
+ state->pads[CX25840_PAD_VID_OUT].sig_type = PAD_SIGNAL_DV;
sd->entity.function = MEDIA_ENT_F_ATV_DECODER;
ret = media_entity_pads_init(&sd->entity, ARRAY_SIZE(state->pads),
--- a/drivers/media/i2c/cx25840/cx25840-core.h
+++ b/drivers/media/i2c/cx25840/cx25840-core.h
@@ -40,7 +40,6 @@ enum cx25840_model {
enum cx25840_media_pads {
CX25840_PAD_INPUT,
CX25840_PAD_VID_OUT,
- CX25840_PAD_VBI_OUT,
CX25840_NUM_PADS
};
