Fix error bit operation in watchdog_start() Signed-off-by: Ji-Ze Hong (Peter Hong) <hpeter+linux_kernel@xxxxxxxxx> --- drivers/watchdog/f71808e_wdt.c | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-) diff --git a/drivers/watchdog/f71808e_wdt.c b/drivers/watchdog/f71808e_wdt.c index 9a1c761258ce..9129485732c7 100644 --- a/drivers/watchdog/f71808e_wdt.c +++ b/drivers/watchdog/f71808e_wdt.c @@ -387,18 +387,17 @@ static int watchdog_start(void) case f81866: /* Set pin 70 to WDTRST# */ - superio_clear_bit(watchdog.sioaddr, SIO_F81866_REG_PORT_SEL, - BIT(3) | BIT(0)); - superio_set_bit(watchdog.sioaddr, SIO_F81866_REG_PORT_SEL, - BIT(2)); + superio_clear_bit(watchdog.sioaddr, SIO_F81866_REG_PORT_SEL, 3); + superio_clear_bit(watchdog.sioaddr, SIO_F81866_REG_PORT_SEL, 0); + superio_set_bit(watchdog.sioaddr, SIO_F81866_REG_PORT_SEL, 2); + /* * GPIO1 Control Register when 27h BIT3:2 = 01 & BIT0 = 0. * The PIN 70(GPIO15/WDTRST) is controlled by 2Ch: * BIT5: 0 -> WDTRST# * 1 -> GPIO15 */ - superio_clear_bit(watchdog.sioaddr, SIO_F81866_REG_GPIO1, - BIT(5)); + superio_clear_bit(watchdog.sioaddr, SIO_F81866_REG_GPIO1, 5); break; default: -- 2.7.4
