Since upgrading my system from Linux 3.12 to 3.12.3, my PCTV Systems nanoStick T2 290e does not work anymore. This happens with 3.12.3: [ 3.778817] em28174 #0: i2c eeprom 0000: 26 00 01 00 02 09 d8 85 80 80 e5 80 f4 f5 94 90 [ 3.779741] em28174 #0: i2c eeprom 0010: 78 0d e4 f0 f5 46 12 00 5a c2 eb c2 e8 30 e9 03 [ 3.780643] em28174 #0: i2c eeprom 0020: 12 09 de 30 eb 03 12 09 10 30 ec f1 12 07 72 80 [ 3.781562] em28174 #0: i2c eeprom 0030: ec 00 60 00 e5 f5 64 01 60 09 e5 f5 64 09 60 03 [ 3.782473] em28174 #0: i2c eeprom 0040: c2 c6 22 e5 f7 b4 03 13 e5 f6 b4 87 03 02 09 92 [ 3.783406] em28174 #0: i2c eeprom 0050: e5 f6 b4 93 03 02 07 e6 c2 c6 22 c2 c6 22 12 09 [ 3.784314] em28174 #0: i2c eeprom 0060: cf 02 06 19 1a eb 67 95 13 20 4f 02 c0 13 6b 10 [ 3.785213] em28174 #0: i2c eeprom 0070: a0 1a ba 14 ce 1a 39 57 00 5c 18 00 00 00 00 00 [ 3.786140] em28174 #0: i2c eeprom 0080: 00 00 00 00 44 36 00 00 f0 10 02 00 00 00 00 00 [ 3.787057] em28174 #0: i2c eeprom 0090: 5b 23 c0 00 00 00 20 40 20 80 02 20 01 01 00 00 [ 3.787970] em28174 #0: i2c eeprom 00a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 3.788879] em28174 #0: i2c eeprom 00b0: c6 40 00 00 00 00 a7 00 00 00 00 00 00 00 00 00 [ 3.789790] em28174 #0: i2c eeprom 00c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 38 32 [ 3.790709] em28174 #0: i2c eeprom 00d0: 34 31 30 31 31 36 36 30 31 37 31 32 32 31 46 4b [ 3.791625] em28174 #0: i2c eeprom 00e0: 4a 31 00 4f 53 49 30 30 33 30 38 44 30 31 31 30 [ 3.792531] em28174 #0: i2c eeprom 00f0: 46 4b 4a 31 00 00 00 00 00 00 00 00 00 00 31 30 [ 3.793444] em28174 #0: i2c eeprom 0100: ... (skipped) [ 3.793502] em28174 #0: EEPROM ID = 26 00 01 00, EEPROM hash = 0xfcf432bb [ 3.793559] em28174 #0: EEPROM info: [ 3.793616] em28174 #0: microcode start address = 0x0004, boot configuration = 0x01 [ 3.804741] scsi 8:0:0:0: Direct-Access Generic Ultra HS-SD/MMC 1.82 PQ: 0 ANSI: 0 [ 3.805345] sd 8:0:0:0: Attached scsi generic sg3 type 0 [ 3.818139] em28174 #0: No audio on board. [ 3.818194] em28174 #0: 500mA max power [ 3.818247] em28174 #0: Table at offset 0x39, strings=0x1aa0, 0x14ba, 0x1ace [ 3.818318] em28174 #0: Identified as PCTV nanoStick T2 290e (card=78) [ 3.818374] em28174 #0: v4l2 driver version 0.2.0 [ 3.821522] sd 8:0:0:0: [sdc] Attached SCSI removable disk [ 3.823606] em28174 #0: V4L2 video device registered as video0 [ 3.823662] em28174 #0: dvb set to isoc mode. [ 3.823972] usbcore: registered new interface driver em28xx [ 3.844020] tda18271 1-0060: creating new instance [ 3.868422] tda18271_read_regs: [1-0060|M] ERROR: i2c_transfer returned: -19 [ 3.868492] Error reading device ID @ 1-0060, bailing out. [ 3.868548] tda18271_attach: [1-0060|M] error -5 on line 1285 [ 3.868603] tda18271 1-0060: destroying instance [ 3.868666] Em28xx: Initialized (Em28xx dvb Extension) extension [ 3.894687] Registered IR keymap rc-pinnacle-pctv-hd [ 3.894819] input: em28xx IR (em28174 #0) as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/rc/rc0/input23 [ 3.894979] rc0: em28xx IR (em28174 #0) as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/rc/rc0 [ 3.895570] Em28xx: Initialized (Em28xx Input Extension) extension I see the same problem reported here: https://github.com/Hexxeh/rpi-firmware/issues/38 where it is mentioned that this regression also appeared in 3.10 stable series recently. -- Frederik Himpe -- To unsubscribe from this list: send the line "unsubscribe stable" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html