On Tue, 2019-03-05 at 13:05 +0800, Weiyi Lu wrote:
> In previous MediaTek PLL design, it assumes the pcw change control
> is always on the CON1 register.
> However, the pcw change bit on MT8183 was moved onto CON0 because
> the the PCW length of audio PLLs are extended to 32-bit.
> Add configurable pcw_chg_reg to set the pcw change control register
> address or using the default control register CON1 if without
> setting in pll data.
>
> Signed-off-by: Weiyi Lu <weiyi.lu@xxxxxxxxxxxx>
Reviewed-by: James Liao <jamesjj.liao@xxxxxxxxxxxx>
> ---
> drivers/clk/mediatek/clk-mtk.h | 1 +
> drivers/clk/mediatek/clk-pll.c | 17 +++++++++++------
> 2 files changed, 12 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/clk/mediatek/clk-mtk.h b/drivers/clk/mediatek/clk-mtk.h
> index 928905496c4b..37ae944548e9 100644
> --- a/drivers/clk/mediatek/clk-mtk.h
> +++ b/drivers/clk/mediatek/clk-mtk.h
> @@ -221,6 +221,7 @@ struct mtk_pll_data {
> int pcwibits;
> uint32_t pcw_reg;
> int pcw_shift;
> + uint32_t pcw_chg_reg;
> const struct mtk_pll_div_table *div_table;
> const char *parent_name;
> };
> diff --git a/drivers/clk/mediatek/clk-pll.c b/drivers/clk/mediatek/clk-pll.c
> index 67aaa3082d9b..65cee1d6c400 100644
> --- a/drivers/clk/mediatek/clk-pll.c
> +++ b/drivers/clk/mediatek/clk-pll.c
> @@ -27,7 +27,7 @@
> #define CON0_BASE_EN BIT(0)
> #define CON0_PWR_ON BIT(0)
> #define CON0_ISO_EN BIT(1)
> -#define CON0_PCW_CHG BIT(31)
> +#define PCW_CHG_MASK BIT(31)
>
> #define AUDPLL_TUNER_EN BIT(31)
>
> @@ -51,6 +51,7 @@ struct mtk_clk_pll {
> void __iomem *tuner_addr;
> void __iomem *tuner_en_addr;
> void __iomem *pcw_addr;
> + void __iomem *pcw_chg_addr;
> const struct mtk_pll_data *data;
> };
>
> @@ -122,7 +123,7 @@ static void __mtk_pll_tuner_disable(struct mtk_clk_pll *pll)
> static void mtk_pll_set_rate_regs(struct mtk_clk_pll *pll, u32 pcw,
> int postdiv)
> {
> - u32 con1, val;
> + u32 chg, val;
> int pll_en;
>
> pll_en = readl(pll->base_addr + REG_CON0) & CON0_BASE_EN;
> @@ -147,14 +148,14 @@ static void mtk_pll_set_rate_regs(struct mtk_clk_pll *pll, u32 pcw,
> val |= pcw << pll->data->pcw_shift;
> writel(val, pll->pcw_addr);
>
> - con1 = readl(pll->base_addr + REG_CON1);
> + chg = readl(pll->pcw_chg_addr);
>
> if (pll_en)
> - con1 |= CON0_PCW_CHG;
> + chg |= PCW_CHG_MASK;
>
> - writel(con1, pll->base_addr + REG_CON1);
> + writel(chg, pll->pcw_chg_addr);
> if (pll->tuner_addr)
> - writel(con1 + 1, pll->tuner_addr);
> + writel(val + 1, pll->tuner_addr);
>
> /* restore tuner_en */
> __mtk_pll_tuner_enable(pll);
> @@ -329,6 +330,10 @@ static struct clk *mtk_clk_register_pll(const struct mtk_pll_data *data,
> pll->pwr_addr = base + data->pwr_reg;
> pll->pd_addr = base + data->pd_reg;
> pll->pcw_addr = base + data->pcw_reg;
> + if (data->pcw_chg_reg)
> + pll->pcw_chg_addr = base + data->pcw_chg_reg;
> + else
> + pll->pcw_chg_addr = pll->base_addr + REG_CON1;
> if (data->tuner_reg)
> pll->tuner_addr = base + data->tuner_reg;
> if (data->tuner_en_reg)
