Re: [BUG linux-4.9.x] xen hotplug cpu leads to 100% steal usage

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Juergen,

On 3/4/19 4:14 PM, Juergen Gross wrote:
> On 01/03/2019 03:35, Dongli Zhang wrote:
>> This issue is only for stable 4.9.x (e.g., 4.9.160), while the root cause is
>> still in the lasted mainline kernel.
>>
>> This is obviated by new feature patch set ended with b672592f0221
>> ("sched/cputime: Remove generic asm headers").
>>
>> After xen guest is up for long time, once we hotplug new vcpu, the corresponding
>> steal usage might become 100% and the steal time from /proc/stat would increase
>> abnormally.
>>
>> As we cannot wait for long time to reproduce the issue, here is how I reproduce
>> it on purpose by accounting a large initial steal clock for new vcpu 2 and 3.
>>
>> 1. Apply the below patch to guest 4.9.160 to account large initial steal clock
>> for new vcpu 2 and 3:
>>
>> diff --git a/drivers/xen/time.c b/drivers/xen/time.c
>> index ac5f23f..3cf629e 100644
>> --- a/drivers/xen/time.c
>> +++ b/drivers/xen/time.c
>> @@ -85,7 +85,14 @@ u64 xen_steal_clock(int cpu)
>>         struct vcpu_runstate_info state;
>>  
>>         xen_get_runstate_snapshot_cpu(&state, cpu);
>> -       return state.time[RUNSTATE_runnable] + state.time[RUNSTATE_offline];
>> +
>> +       if (cpu == 2 || cpu == 3)
>> +               return state.time[RUNSTATE_runnable]
>> +                      + state.time[RUNSTATE_offline]
>> +                      + 0x00071e87e677aa12;
>> +       else
>> +               return state.time[RUNSTATE_runnable]
>> +                      + state.time[RUNSTATE_offline];
>>  }
>>  
>>  void xen_setup_runstate_info(int cpu)
>>
>>
>> 2. Boot hvm guest with "vcpus=2" and "maxvcpus=4". By default, VM boot with
>> vcpu 0 and 1.
>>
>> 3. Hotplug vcpu 2 and 3 via "xl vcpu-set <domid> 4" on dom0.
>>
>> In my env, the steal becomes 100% within 10s after the "xl vcpu-set" command on
>> dom0.
>>
>> I can reproduce on kvm with similar method. However, as the initial steal clock
>> on kvm guest is always 0, I do not think it is easy to hit this issue on kvm.
>>
>> --------------------------------------------------------
>>
>> The root cause is that the return type of jiffies_to_usecs() is 'unsigned int',
>> but not 'unsigned long'. As a result, the leading 32 bits are discarded.
>>
>> jiffies_to_usecs() is indirectly triggered by cputime_to_nsecs() at line 264.
>> If guest is already up for long time, the initial steal time for new vcpu might
>> be large and the leading 32 bits of jiffies_to_usecs() would be discarded.
>>
>> As a result, the steal at line 259 is always large and the
>> this_rq()->prev_steal_time at line 264 is always small. The difference at line
>> 260 is always large during each time steal_account_process_time() is involved.
>> Finally, the steal time in /proc/stat would increase abnormally.
>>
>> 252 static __always_inline cputime_t steal_account_process_time(cputime_t maxtime)
>> 253 {
>> 254 #ifdef CONFIG_PARAVIRT
>> 255         if (static_key_false(&paravirt_steal_enabled)) {
>> 256                 cputime_t steal_cputime;
>> 257                 u64 steal;
>> 258 
>> 259                 steal = paravirt_steal_clock(smp_processor_id());
>> 260                 steal -= this_rq()->prev_steal_time;
>> 261 
>> 262                 steal_cputime = min(nsecs_to_cputime(steal), maxtime);
>> 263                 account_steal_time(steal_cputime);
>> 264                 this_rq()->prev_steal_time += cputime_to_nsecs(steal_cputime);
>> 265 
>> 266                 return steal_cputime;
>> 267         }
>> 268 #endif
>> 269         return 0;
>> 270 }
>>
>> --------------------------------------------------------
>>
>> I have emailed the kernel mailing list about the return type of
>> jiffies_to_usecs() and jiffies_to_msecs():
>>
>> https://lkml.org/lkml/2019/2/26/899
>>
>>
>> So far, I have two solutions:
>>
>> 1. Change the return type from 'unsigned int' to 'unsigned long' as in above
>> link and I am afraid it would bring side effect. The return type in latest
>> mainline kernel is still 'unsigned int'.
>>
>> 2. Something like below based on stable 4.9.160:
> 
> 3. use jiffies64_to_nsecs() instead of trying to open code it.

Thank you very much for the suggestion!

I have tested that jiffies64_to_nsecs() works well by reproducing the issue in
kvm guest on purpose.

diff --git a/include/linux/jiffies.h b/include/linux/jiffies.h
index 734377a..94aff43 100644
--- a/include/linux/jiffies.h
+++ b/include/linux/jiffies.h
@@ -287,13 +287,13 @@ extern unsigned long preset_lpj;
 extern unsigned int jiffies_to_msecs(const unsigned long j);
 extern unsigned int jiffies_to_usecs(const unsigned long j);

+extern u64 jiffies64_to_nsecs(u64 j);
+
 static inline u64 jiffies_to_nsecs(const unsigned long j)
 {
-       return (u64)jiffies_to_usecs(j) * NSEC_PER_USEC;
+       return jiffies64_to_nsecs(j);
 }

-extern u64 jiffies64_to_nsecs(u64 j);



Below is the patch used to reproduce on kvm. cpu 2 is added to reproduce on
purpose via "device_add
qemu64-x86_64-cpu,id=core2,socket-id=2,core-id=0,thread-id=0" in qemu monitor.
Guest is boot with qemu cmd "-smp 2,maxcpus=3"

diff --git a/arch/x86/kernel/kvm.c b/arch/x86/kernel/kvm.c
index 77f17cb..54d46e0 100644
--- a/arch/x86/kernel/kvm.c
+++ b/arch/x86/kernel/kvm.c
@@ -407,7 +407,10 @@ static u64 kvm_steal_clock(int cpu)
                rmb();
        } while ((version & 1) || (version != src->version));

-       return steal;
+       if (cpu == 0 || cpu == 1)
+               return steal;
+       else
+               return steal + 0x00071e87e677aa12;
 }


Dongli Zhang



[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux