The patch below does not apply to the 4.9-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@xxxxxxxxxxxxxxx>.
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
>From 5603731a15ef9ca317c122cc8c959f1dee1798b4 Mon Sep 17 00:00:00 2001
From: Takeshi Saito <takeshi.saito.xv@xxxxxxxxxxx>
Date: Thu, 21 Feb 2019 20:38:05 +0100
Subject: [PATCH] mmc: tmio: fix access width of Block Count Register
In R-Car Gen2 or later, the maximum number of transfer blocks are
changed from 0xFFFF to 0xFFFFFFFF. Therefore, Block Count Register
should use iowrite32().
If another system (U-boot, Hypervisor OS, etc) uses bit[31:16], this
value will not be cleared. So, SD/MMC card initialization fails.
So, check for the bigger register and use apropriate write. Also, mark
the register as extended on Gen2.
Signed-off-by: Takeshi Saito <takeshi.saito.xv@xxxxxxxxxxx>
[wsa: use max_blk_count in if(), add Gen2, update commit message]
Signed-off-by: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
Cc: stable@xxxxxxxxxx
Reviewed-by: Simon Horman <horms+renesas@xxxxxxxxxxxx>
[Ulf: Fixed build error]
Signed-off-by: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
diff --git a/drivers/mmc/host/renesas_sdhi_sys_dmac.c b/drivers/mmc/host/renesas_sdhi_sys_dmac.c
index 8471160316e0..02cd878e209f 100644
--- a/drivers/mmc/host/renesas_sdhi_sys_dmac.c
+++ b/drivers/mmc/host/renesas_sdhi_sys_dmac.c
@@ -65,6 +65,7 @@ static const struct renesas_sdhi_of_data of_rcar_gen2_compatible = {
.scc_offset = 0x0300,
.taps = rcar_gen2_scc_taps,
.taps_num = ARRAY_SIZE(rcar_gen2_scc_taps),
+ .max_blk_count = 0xffffffff,
};
/* Definitions for sampling clocks */
diff --git a/drivers/mmc/host/tmio_mmc.h b/drivers/mmc/host/tmio_mmc.h
index c03529e3f01a..2adb0d24360f 100644
--- a/drivers/mmc/host/tmio_mmc.h
+++ b/drivers/mmc/host/tmio_mmc.h
@@ -277,6 +277,11 @@ static inline void sd_ctrl_write32_as_16_and_16(struct tmio_mmc_host *host,
iowrite16(val >> 16, host->ctl + ((addr + 2) << host->bus_shift));
}
+static inline void sd_ctrl_write32(struct tmio_mmc_host *host, int addr, u32 val)
+{
+ iowrite32(val, host->ctl + (addr << host->bus_shift));
+}
+
static inline void sd_ctrl_write32_rep(struct tmio_mmc_host *host, int addr,
const u32 *buf, int count)
{
diff --git a/drivers/mmc/host/tmio_mmc_core.c b/drivers/mmc/host/tmio_mmc_core.c
index 41d79720e745..f7a6f005899a 100644
--- a/drivers/mmc/host/tmio_mmc_core.c
+++ b/drivers/mmc/host/tmio_mmc_core.c
@@ -43,6 +43,7 @@
#include <linux/regulator/consumer.h>
#include <linux/mmc/sdio.h>
#include <linux/scatterlist.h>
+#include <linux/sizes.h>
#include <linux/spinlock.h>
#include <linux/swiotlb.h>
#include <linux/workqueue.h>
@@ -703,7 +704,10 @@ static int tmio_mmc_start_data(struct tmio_mmc_host *host,
/* Set transfer length / blocksize */
sd_ctrl_write16(host, CTL_SD_XFER_LEN, data->blksz);
- sd_ctrl_write16(host, CTL_XFER_BLK_COUNT, data->blocks);
+ if (host->mmc->max_blk_count >= SZ_64K)
+ sd_ctrl_write32(host, CTL_XFER_BLK_COUNT, data->blocks);
+ else
+ sd_ctrl_write16(host, CTL_XFER_BLK_COUNT, data->blocks);
tmio_mmc_start_dma(host, data);
