From: Jose Abreu <jose.abreu@xxxxxxxxxxxx> [ Upstream commit 4ec5302fa906ec9d86597b236f62315bacdb9622 ] If we don't have DT then stmmac_clk will not be available. Let's add a new Platform Data field so that we can specify the refclk by this mean. This way we can still use the coalesce command in PCI based setups. Signed-off-by: Jose Abreu <joabreu@xxxxxxxxxxxx> Cc: Joao Pinto <jpinto@xxxxxxxxxxxx> Cc: David S. Miller <davem@xxxxxxxxxxxxx> Cc: Giuseppe Cavallaro <peppe.cavallaro@xxxxxx> Cc: Alexandre Torgue <alexandre.torgue@xxxxxx> Signed-off-by: David S. Miller <davem@xxxxxxxxxxxxx> Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> --- .../net/ethernet/stmicro/stmmac/stmmac_ethtool.c | 14 ++++++++++---- include/linux/stmmac.h | 1 + 2 files changed, 11 insertions(+), 4 deletions(-) diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c index c3c6335cbe9ae..ecddd9948788a 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c @@ -702,8 +702,11 @@ static u32 stmmac_usec2riwt(u32 usec, struct stmmac_priv *priv) { unsigned long clk = clk_get_rate(priv->plat->stmmac_clk); - if (!clk) - return 0; + if (!clk) { + clk = priv->plat->clk_ref_rate; + if (!clk) + return 0; + } return (usec * (clk / 1000000)) / 256; } @@ -712,8 +715,11 @@ static u32 stmmac_riwt2usec(u32 riwt, struct stmmac_priv *priv) { unsigned long clk = clk_get_rate(priv->plat->stmmac_clk); - if (!clk) - return 0; + if (!clk) { + clk = priv->plat->clk_ref_rate; + if (!clk) + return 0; + } return (riwt * 256) / (clk / 1000000); } diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h index 32feac5bbd75b..5844105a482bc 100644 --- a/include/linux/stmmac.h +++ b/include/linux/stmmac.h @@ -183,6 +183,7 @@ struct plat_stmmacenet_data { struct clk *pclk; struct clk *clk_ptp_ref; unsigned int clk_ptp_rate; + unsigned int clk_ref_rate; struct reset_control *stmmac_rst; struct stmmac_axi *axi; int has_gmac4; -- 2.19.1