4.20-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit bd540ebe68c3017194a1caa38e075bbbc0832749 ]
Add the board level fixed regulators for 3.3V and 1.8V which is used to
power - among other things - the tlv320aic3106 codec.
Apart from removing the following warning during boot:
tlv320aic3x-codec 0-0018: Invalid supply voltage(s) AVDD: -22, DVDD: -22
With the correct voltages the driver can select correct OCMV value to
reduce pop noise.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
Signed-off-by: Sekhar Nori <nsekhar@xxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
arch/arm/boot/dts/da850-lcdk.dts | 36 ++++++++++++++++++++++++++++++++
1 file changed, 36 insertions(+)
diff --git a/arch/arm/boot/dts/da850-lcdk.dts b/arch/arm/boot/dts/da850-lcdk.dts
index 0177e3ed20fe..c196e37606c4 100644
--- a/arch/arm/boot/dts/da850-lcdk.dts
+++ b/arch/arm/boot/dts/da850-lcdk.dts
@@ -39,6 +39,36 @@
};
};
+ vcc_5vd: fixedregulator-vcc_5vd {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_5vd";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ };
+
+ vcc_3v3d: fixedregulator-vcc_3v3d {
+ /* TPS650250 - VDCDC1 */
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_3v3d";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc_5vd>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vcc_1v8d: fixedregulator-vcc_1v8d {
+ /* TPS650250 - VDCDC2 */
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_1v8d";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vcc_5vd>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
sound {
compatible = "simple-audio-card";
simple-audio-card,name = "DA850/OMAP-L138 LCDK";
@@ -221,6 +251,12 @@
compatible = "ti,tlv320aic3106";
reg = <0x18>;
status = "okay";
+
+ /* Regulators */
+ IOVDD-supply = <&vcc_3v3d>;
+ AVDD-supply = <&vcc_3v3d>;
+ DRVDD-supply = <&vcc_3v3d>;
+ DVDD-supply = <&vcc_1v8d>;
};
};
--
2.19.1
