[RESPIN,v3.10.y 2/2] ARM: mvebu: second PCIe unit of Armada XP mv78230 is only x1 capable

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Various Marvell datasheets advertise second PCIe unit of mv78230
flavour of Armada XP as x4/quad x1 capable. This second unit is in
fact only x1 capable. This patch fixes current mv78230 .dtsi to
reflect that, i.e. makes 1.0 the second interface (instead of 2.0
at the moment). This was successfully tested on a mv78230-based
ReadyNAS 2120 platform with a x1 device (FL1009 XHCI controller)
connected to this second interface.

Signed-off-by: Arnaud Ebalard <arno@xxxxxxxxxxxx>
---
 arch/arm/boot/dts/armada-xp-mv78230.dtsi | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/arch/arm/boot/dts/armada-xp-mv78230.dtsi b/arch/arm/boot/dts/armada-xp-mv78230.dtsi
index f8eaa38..f94cdbc 100644
--- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi
@@ -81,7 +81,7 @@
 			/*
 			 * MV78230 has 2 PCIe units Gen2.0: One unit can be
 			 * configured as x4 or quad x1 lanes. One unit is
-			 * x4/x1.
+			 * x1 only.
 			 */
 			pcie-controller {
 				compatible = "marvell,armada-xp-pcie";
@@ -94,10 +94,10 @@
 				bus-range = <0x00 0xff>;
 
 				ranges = <0x82000000 0 0x40000 0x40000 0 0x00002000   /* Port 0.0 registers */
-					0x82000000 0 0x42000 0x42000 0 0x00002000   /* Port 2.0 registers */
 					0x82000000 0 0x44000 0x44000 0 0x00002000   /* Port 0.1 registers */
 					0x82000000 0 0x48000 0x48000 0 0x00002000   /* Port 0.2 registers */
 					0x82000000 0 0x4c000 0x4c000 0 0x00002000   /* Port 0.3 registers */
+					0x82000000 0 0x80000 0x80000 0 0x00002000   /* Port 1.0 registers */
 					0x82000000 0 0xe0000000 0xe0000000 0 0x08000000   /* non-prefetchable memory */
 					0x81000000 0 0	  0xe8000000 0 0x00100000>; /* downstream I/O */
 
@@ -165,19 +165,19 @@
 					status = "disabled";
 				};
 
-				pcie@9,0 {
+				pcie@5,0 {
 					device_type = "pci";
-					assigned-addresses = <0x82000800 0 0x42000 0 0x2000>;
-					reg = <0x4800 0 0 0 0>;
+					assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
+					reg = <0x2800 0 0 0 0>;
 					#address-cells = <3>;
 					#size-cells = <2>;
 					#interrupt-cells = <1>;
 					ranges;
 					interrupt-map-mask = <0 0 0 0>;
-					interrupt-map = <0 0 0 0 &mpic 99>;
-					marvell,pcie-port = <2>;
+					interrupt-map = <0 0 0 0 &mpic 62>;
+					marvell,pcie-port = <1>;
 					marvell,pcie-lane = <0>;
-					clocks = <&gateclk 26>;
+					clocks = <&gateclk 9>;
 					status = "disabled";
 				};
 			};
-- 
1.8.4.4

--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]