On Wed, 13 Feb 2019 22:36:40 +0800
Changbin Du <changbin.du@xxxxxxxxx> wrote:
> Hi Steven,
> I think this is a critical issue. Could you give priority to this fix?
>
> On Fri, Jan 25, 2019 at 11:10:50PM +0800, Changbin Du wrote:
> > The userspace can ask kprobe to intercept strings at any memory address,
> > including invalid kernel address. In this case, fetch_store_strlen()
> > would crash since it uses general usercopy function.
> >
> > For example, we can crash the kernel by doing something as below:
> >
> > $ sudo kprobe 'p:do_sys_open +0(+0(%si)):string'
Note, I'm not able to reproduce this.
I just get:
sendmail-1085 [001] .... 277.344573: open: (do_sys_open+0x0/0x210) arg1=(fault)
<...>-1550 [003] .... 279.879011: open: (do_sys_open+0x0/0x210) arg1=(fault)
<...>-1550 [003] .... 279.879056: open: (do_sys_open+0x0/0x210) arg1=(fault)
<...>-1550 [003] .... 279.879079: open: (do_sys_open+0x0/0x210) arg1=(fault)
<...>-1550 [003] .... 279.879132: open: (do_sys_open+0x0/0x210) arg1=(fault)
<...>-1550 [003] .... 279.879683: open: (do_sys_open+0x0/0x210) arg1=(fault)
<...>-1550 [003] .... 279.881521: open: (do_sys_open+0x0/0x210) arg1=(fault)
<...>-1550 [003] .... 279.881541: open: (do_sys_open+0x0/0x210) arg1=""
<...>-1597 [005] .... 280.907662: open: (do_sys_open+0x0/0x210) arg1=(fault)
<...>-1597 [005] .... 280.907694: open: (do_sys_open+0x0/0x210) arg1=(fault)
<...>-1597 [005] .... 280.907772: open: (do_sys_open+0x0/0x210) arg1=(fault)
<...>-1597 [005] .... 280.907825: open: (do_sys_open+0x0/0x210) arg1=(fault)
<...>-1597 [005] .... 280.907891: open: (do_sys_open+0x0/0x210) arg1=(fault)
<...>-1597 [005] .... 280.907947: open: (do_sys_open+0x0/0x210) arg1=(fault)
> >
> > [ 103.620391] BUG: GPF in non-whitelisted uaccess (non-canonical address?)
> > [ 103.622104] general protection fault: 0000 [#1] SMP PTI
> > [ 103.623424] CPU: 10 PID: 1046 Comm: cat Not tainted 5.0.0-rc3-00130-gd73aba1-dirty #96
> > [ 103.625321] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-2-g628b2e6-dirty-20190104_103505-linux 04/01/2014
> > [ 103.628284] RIP: 0010:process_fetch_insn+0x1ab/0x4b0
What line number is the RIP on?
-- Steve
> > [ 103.629518] Code: 10 83 80 28 2e 00 00 01 31 d2 31 ff 48 8b 74 24 28 eb 0c 81 fa ff 0f 00 00 7f 1c 85 c0 75 18 66 66 90 0f ae e8 48 63
> > ca 89 f8 <8a> 0c 31 66 66 90 83 c2 01 84 c9 75 dc 89 54 24 34 89 44 24 28 48
> > [ 103.634032] RSP: 0018:ffff88845eb37ce0 EFLAGS: 00010246
> > [ 103.635312] RAX: 0000000000000000 RBX: ffff888456c4e5a8 RCX: 0000000000000000
> > [ 103.637057] RDX: 0000000000000000 RSI: 2e646c2f6374652f RDI: 0000000000000000
> > [ 103.638795] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
> > [ 103.640556] R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000
> > [ 103.642297] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
> > [ 103.644040] FS: 0000000000000000(0000) GS:ffff88846f000000(0000) knlGS:0000000000000000
> > [ 103.646019] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> > [ 103.647436] CR2: 00007ffc79758038 CR3: 0000000463360006 CR4: 0000000000020ee0
> > [ 103.649147] Call Trace:
> > [ 103.649781] ? sched_clock_cpu+0xc/0xa0
> > [ 103.650747] ? do_sys_open+0x5/0x220
> > [ 103.651635] kprobe_trace_func+0x303/0x380
> > [ 103.652645] ? do_sys_open+0x5/0x220
> > [ 103.653528] kprobe_dispatcher+0x45/0x50
> > [ 103.654682] ? do_sys_open+0x1/0x220
> > [ 103.655875] kprobe_ftrace_handler+0x90/0xf0
> > [ 103.657282] ftrace_ops_assist_func+0x54/0xf0
> > [ 103.658564] ? __call_rcu+0x1dc/0x280
> > [ 103.659482] 0xffffffffc00000bf
> > [ 103.660384] ? __ia32_sys_open+0x20/0x20
> > [ 103.661682] ? do_sys_open+0x1/0x220
> > [ 103.662863] do_sys_open+0x5/0x220
> > [ 103.663988] do_syscall_64+0x60/0x210
> > [ 103.665201] entry_SYSCALL_64_after_hwframe+0x49/0xbe
> > [ 103.666862] RIP: 0033:0x7fc22fadccdd
> > [ 103.668034] Code: 48 89 54 24 e0 41 83 e2 40 75 32 89 f0 25 00 00 41 00 3d 00 00 41 00 74 24 89 f2 b8 01 01 00 00 48 89 fe bf 9c ff ff
> > ff 0f 05 <48> 3d 00 f0 ff ff 77 33 f3 c3 66 0f 1f 84 00 00 00 00 00 48 8d 44
> > [ 103.674029] RSP: 002b:00007ffc7972c3a8 EFLAGS: 00000287 ORIG_RAX: 0000000000000101
> > [ 103.676512] RAX: ffffffffffffffda RBX: 0000562f86147a21 RCX: 00007fc22fadccdd
> > [ 103.678853] RDX: 0000000000080000 RSI: 00007fc22fae1428 RDI: 00000000ffffff9c
> > [ 103.681151] RBP: ffffffffffffffff R08: 0000000000000000 R09: 0000000000000000
> > [ 103.683489] R10: 0000000000000000 R11: 0000000000000287 R12: 00007fc22fce90a8
> > [ 103.685774] R13: 0000000000000001 R14: 0000000000000000 R15: 0000000000000000
> > [ 103.688056] Modules linked in:
> > [ 103.689131] ---[ end trace 43792035c28984a1 ]---
> >
> > This can be fixed by using probe_mem_read() instead.
> >
> > Signed-off-by: Changbin Du <changbin.du@xxxxxxxxx>
> > Cc: stable@xxxxxxxxxxxxxxx
> > ---
> > kernel/trace/trace_kprobe.c | 10 +---------
> > 1 file changed, 1 insertion(+), 9 deletions(-)
> >
> > diff --git a/kernel/trace/trace_kprobe.c b/kernel/trace/trace_kprobe.c
> > index d5fb09ebba8b..9eaf07f99212 100644
> > --- a/kernel/trace/trace_kprobe.c
> > +++ b/kernel/trace/trace_kprobe.c
> > @@ -861,22 +861,14 @@ static const struct file_operations kprobe_profile_ops = {
> > static nokprobe_inline int
> > fetch_store_strlen(unsigned long addr)
> > {
> > - mm_segment_t old_fs;
> > int ret, len = 0;
> > u8 c;
> >
> > - old_fs = get_fs();
> > - set_fs(KERNEL_DS);
> > - pagefault_disable();
> > -
> > do {
> > - ret = __copy_from_user_inatomic(&c, (u8 *)addr + len, 1);
> > + ret = probe_mem_read(&c, (u8 *)addr + len, 1);
> > len++;
> > } while (c && ret == 0 && len < MAX_STRING_SIZE);
> >
> > - pagefault_enable();
> > - set_fs(old_fs);
> > -
> > return (ret < 0) ? ret : len;
> > }
> >
> > --
> > 2.19.1
> >
>
