This is a note to let you know that I've just added the patch titled
powerpc/gpio: Fix the wrong GPIO input data on MPC8572/MPC8536
to the 3.4-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
powerpc-gpio-fix-the-wrong-gpio-input-data-on-mpc8572-mpc8536.patch
and it can be found in the queue-3.4 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
>From 1aeef303b5d9e243c41d5b80f8bb059366514a10 Mon Sep 17 00:00:00 2001
From: Liu Gang <Gang.Liu@xxxxxxxxxxxxx>
Date: Fri, 22 Nov 2013 16:12:40 +0800
Subject: powerpc/gpio: Fix the wrong GPIO input data on MPC8572/MPC8536
From: Liu Gang <Gang.Liu@xxxxxxxxxxxxx>
commit 1aeef303b5d9e243c41d5b80f8bb059366514a10 upstream.
For MPC8572/MPC8536, the status of GPIOs defined as output
cannot be determined by reading GPDAT register, so the code
use shadow data register instead. But the code may give the
wrong status of GPIOs defined as input under some scenarios:
1. If some pins were configured as inputs and were asserted
high before booting the kernel, the shadow data has been
initialized with those pin values.
2. Some pins have been configured as output first and have
been set to the high value, then reconfigured as input.
The above cases will make the shadow data for those input
pins to be set to high. Then reading the pin status will
always return high even if the actual pin status is low.
The code should eliminate the effects of the shadow data to
the input pins, and the status of those pins should be
read directly from GPDAT.
Acked-by: Scott Wood <scottwood@xxxxxxxxxxxxx>
Acked-by: Anatolij Gustschin <agust@xxxxxxx>
Signed-off-by: Liu Gang <Gang.Liu@xxxxxxxxxxxxx>
Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/gpio/gpio-mpc8xxx.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
--- a/drivers/gpio/gpio-mpc8xxx.c
+++ b/drivers/gpio/gpio-mpc8xxx.c
@@ -69,10 +69,14 @@ static int mpc8572_gpio_get(struct gpio_
u32 val;
struct of_mm_gpio_chip *mm = to_of_mm_gpio_chip(gc);
struct mpc8xxx_gpio_chip *mpc8xxx_gc = to_mpc8xxx_gpio_chip(mm);
+ u32 out_mask, out_shadow;
- val = in_be32(mm->regs + GPIO_DAT) & ~in_be32(mm->regs + GPIO_DIR);
+ out_mask = in_be32(mm->regs + GPIO_DIR);
- return (val | mpc8xxx_gc->data) & mpc8xxx_gpio2mask(gpio);
+ val = in_be32(mm->regs + GPIO_DAT) & ~out_mask;
+ out_shadow = mpc8xxx_gc->data & out_mask;
+
+ return (val | out_shadow) & mpc8xxx_gpio2mask(gpio);
}
static int mpc8xxx_gpio_get(struct gpio_chip *gc, unsigned int gpio)
Patches currently in stable-queue which might be from Gang.Liu@xxxxxxxxxxxxx are
queue-3.4/powerpc-gpio-fix-the-wrong-gpio-input-data-on-mpc8572-mpc8536.patch
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html