This is a note to let you know that I've just added the patch titled
ARM: dts: omap4-panda-common: Fix pin muxing for wl12xx
to the 3.12-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
arm-dts-omap4-panda-common-fix-pin-muxing-for-wl12xx.patch
and it can be found in the queue-3.12 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
>From 2ba2866f782f7f1c38abc3dd56d3295efd289264 Mon Sep 17 00:00:00 2001
From: Balaji T K <balajitk@xxxxxx>
Date: Mon, 2 Dec 2013 11:38:13 -0800
Subject: ARM: dts: omap4-panda-common: Fix pin muxing for wl12xx
From: Balaji T K <balajitk@xxxxxx>
commit 2ba2866f782f7f1c38abc3dd56d3295efd289264 upstream.
pin mux wl12xx_gpio and wl12xx_pins should be part of omap4_pmx_core
and not omap4_pmx_wkup. So, move wl12xx_* to omap4_pmx_core.
Fix the following error message:
pinctrl-single 4a31e040.pinmux: mux offset out of range: 0x38 (0x38)
pinctrl-single 4a31e040.pinmux: could not add functions for pinmux_wl12xx_pins 56x
SDIO card is not detected after moving pin mux to omap4_pmx_core since
sdmmc5_clk pull is disabled. Enable Pull up on sdmmc5_clk to detect SDIO card.
This fixes a regression where WLAN did not work after a warm reset
or after one up/down cycle that happened when we move omap4 to boot
using device tree only. For reference, the kernel bug is described at:
https://bugzilla.kernel.org/show_bug.cgi?id=63821
Signed-off-by: Balaji T K <balajitk@xxxxxx>
[tony@xxxxxxxxxxx: update comments to describe the regression]
Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
arch/arm/boot/dts/omap4-panda-common.dtsi | 20 ++++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)
--- a/arch/arm/boot/dts/omap4-panda-common.dtsi
+++ b/arch/arm/boot/dts/omap4-panda-common.dtsi
@@ -239,15 +239,6 @@
0xf0 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_sda */
>;
};
-};
-
-&omap4_pmx_wkup {
- led_wkgpio_pins: pinmux_leds_wkpins {
- pinctrl-single,pins = <
- 0x1a (PIN_OUTPUT | MUX_MODE3) /* gpio_wk7 */
- 0x1c (PIN_OUTPUT | MUX_MODE3) /* gpio_wk8 */
- >;
- };
/*
* wl12xx GPIO outputs for WLAN_EN, BT_EN, FM_EN, BT_WAKEUP
@@ -267,7 +258,7 @@
pinctrl-single,pins = <
0x38 (PIN_INPUT | MUX_MODE3) /* gpmc_ncs2.gpio_52 */
0x3a (PIN_INPUT | MUX_MODE3) /* gpmc_ncs3.gpio_53 */
- 0x108 (PIN_OUTPUT | MUX_MODE0) /* sdmmc5_clk.sdmmc5_clk */
+ 0x108 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_clk.sdmmc5_clk */
0x10a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_cmd.sdmmc5_cmd */
0x10c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat0.sdmmc5_dat0 */
0x10e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat1.sdmmc5_dat1 */
@@ -276,6 +267,15 @@
>;
};
};
+
+&omap4_pmx_wkup {
+ led_wkgpio_pins: pinmux_leds_wkpins {
+ pinctrl-single,pins = <
+ 0x1a (PIN_OUTPUT | MUX_MODE3) /* gpio_wk7 */
+ 0x1c (PIN_OUTPUT | MUX_MODE3) /* gpio_wk8 */
+ >;
+ };
+};
&i2c1 {
pinctrl-names = "default";
Patches currently in stable-queue which might be from balajitk@xxxxxx are
queue-3.12/arm-dts-omap4-panda-common-fix-pin-muxing-for-wl12xx.patch
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html