4.20-stable review patch. If anyone has any objections, please let me know.
------------------
From: Stanislaw Gruszka <sgruszka@xxxxxxxxxx>
commit f1b8ee35fec4a070b7760a99709fc98f237c2b86 upstream.
If we are associated and scanning is performed, sw_scan_complete callback
is done after we get back to operating channel, so we do not perform
queue cal work. Fix this queue cal work from sw_scan_complete().
On mt76x0 we have to restore gain in MT_BBP(AGC, 8) register after
scanning, as it was multiple times modified by channel switch code.
So queue cal work without any delay to set AGC gain value.
Similar like in mt76x2 init AGC gain only when set operating channel
and just check before queuing cal work in sw_scan_complete() if
initialization was already done.
Fixes: bbd10586f0df ("mt76x0: phy: do not run calibration during channel switch")
Signed-off-by: Stanislaw Gruszka <sgruszka@xxxxxxxxxx>
Signed-off-by: Felix Fietkau <nbd@xxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/net/wireless/mediatek/mt76/mt76x0/main.c | 3 +++
drivers/net/wireless/mediatek/mt76/mt76x0/phy.c | 2 +-
drivers/net/wireless/mediatek/mt76/mt76x02.h | 1 +
drivers/net/wireless/mediatek/mt76/mt76x02_phy.c | 1 +
drivers/net/wireless/mediatek/mt76/mt76x2/usb_main.c | 3 +++
5 files changed, 9 insertions(+), 1 deletion(-)
--- a/drivers/net/wireless/mediatek/mt76/mt76x0/main.c
+++ b/drivers/net/wireless/mediatek/mt76/mt76x0/main.c
@@ -138,6 +138,9 @@ void mt76x0_sw_scan_complete(struct ieee
struct mt76x02_dev *dev = hw->priv;
clear_bit(MT76_SCANNING, &dev->mt76.state);
+
+ if (dev->cal.gain_init_done)
+ ieee80211_queue_delayed_work(hw, &dev->cal_work, 0);
}
EXPORT_SYMBOL_GPL(mt76x0_sw_scan_complete);
--- a/drivers/net/wireless/mediatek/mt76/mt76x0/phy.c
+++ b/drivers/net/wireless/mediatek/mt76/mt76x0/phy.c
@@ -720,7 +720,6 @@ int mt76x0_phy_set_channel(struct mt76x0
mt76x0_read_rx_gain(dev);
mt76x0_phy_set_chan_bbp_params(dev, rf_bw_band);
- mt76x02_init_agc_gain(dev);
if (mt76_is_usb(dev)) {
mt76x0_vco_cal(dev, channel);
@@ -732,6 +731,7 @@ int mt76x0_phy_set_channel(struct mt76x0
if (scan)
return 0;
+ mt76x02_init_agc_gain(dev);
if (mt76_is_mmio(dev))
mt76x0_phy_calibrate(dev, false);
mt76x0_phy_set_txpower(dev);
--- a/drivers/net/wireless/mediatek/mt76/mt76x02.h
+++ b/drivers/net/wireless/mediatek/mt76/mt76x02.h
@@ -63,6 +63,7 @@ struct mt76x02_calibration {
bool tssi_comp_pending;
bool dpd_cal_done;
bool channel_cal_done;
+ bool gain_init_done;
};
struct mt76x02_dev {
--- a/drivers/net/wireless/mediatek/mt76/mt76x02_phy.c
+++ b/drivers/net/wireless/mediatek/mt76/mt76x02_phy.c
@@ -254,5 +254,6 @@ void mt76x02_init_agc_gain(struct mt76x0
memcpy(dev->cal.agc_gain_cur, dev->cal.agc_gain_init,
sizeof(dev->cal.agc_gain_cur));
dev->cal.low_gain = -1;
+ dev->cal.gain_init_done = true;
}
EXPORT_SYMBOL_GPL(mt76x02_init_agc_gain);
--- a/drivers/net/wireless/mediatek/mt76/mt76x2/usb_main.c
+++ b/drivers/net/wireless/mediatek/mt76/mt76x2/usb_main.c
@@ -156,6 +156,9 @@ mt76x2u_sw_scan_complete(struct ieee8021
struct mt76x02_dev *dev = hw->priv;
clear_bit(MT76_SCANNING, &dev->mt76.state);
+
+ if (dev->cal.gain_init_done)
+ ieee80211_queue_delayed_work(hw, &dev->cal_work, 0);
}
const struct ieee80211_ops mt76x2u_ops = {
