From: Suganath Prabu <suganath-prabu.subramani@xxxxxxxxxxxx>
[ Upstream commit dc730212e8a378763cb182b889f90c8101331332 ]
Call sas_remove_host() before removing the target devices in the driver's
.remove() callback function(i.e. during driver unload time). So that
driver can provide a way to allow SYNC CACHE, START STOP unit commands
etc. (which are issued from SML) to the target drives during driver unload
time.
Once sas_remove_host() is called before removing the target drives then
driver can just clean up the resources allocated for target devices and no
need to call sas_port_delete_phy(), sas_port_delete() API's as these API's
internally called from sas_remove_host().
Signed-off-by: Suganath Prabu <suganath-prabu.subramani@xxxxxxxxxxxx>
Reviewed-by: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
Reviewed-by: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
Signed-off-by: Martin K. Petersen <martin.petersen@xxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
drivers/scsi/mpt3sas/mpt3sas_scsih.c | 2 +-
drivers/scsi/mpt3sas/mpt3sas_transport.c | 7 +++++--
2 files changed, 6 insertions(+), 3 deletions(-)
diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
index 03c52847ed07..adac18ba84d4 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
@@ -9641,6 +9641,7 @@ static void scsih_remove(struct pci_dev *pdev)
/* release all the volumes */
_scsih_ir_shutdown(ioc);
+ sas_remove_host(shost);
list_for_each_entry_safe(raid_device, next, &ioc->raid_device_list,
list) {
if (raid_device->starget) {
@@ -9682,7 +9683,6 @@ static void scsih_remove(struct pci_dev *pdev)
ioc->sas_hba.num_phys = 0;
}
- sas_remove_host(shost);
mpt3sas_base_detach(ioc);
spin_lock(&gioc_lock);
list_del(&ioc->list);
diff --git a/drivers/scsi/mpt3sas/mpt3sas_transport.c b/drivers/scsi/mpt3sas/mpt3sas_transport.c
index 6a8a3c09b4b1..8338b4db0e31 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_transport.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_transport.c
@@ -821,10 +821,13 @@ mpt3sas_transport_port_remove(struct MPT3SAS_ADAPTER *ioc, u64 sas_address,
mpt3sas_port->remote_identify.sas_address,
mpt3sas_phy->phy_id);
mpt3sas_phy->phy_belongs_to_port = 0;
- sas_port_delete_phy(mpt3sas_port->port, mpt3sas_phy->phy);
+ if (!ioc->remove_host)
+ sas_port_delete_phy(mpt3sas_port->port,
+ mpt3sas_phy->phy);
list_del(&mpt3sas_phy->port_siblings);
}
- sas_port_delete(mpt3sas_port->port);
+ if (!ioc->remove_host)
+ sas_port_delete(mpt3sas_port->port);
kfree(mpt3sas_port);
}
--
2.19.1
