From: Douglas Anderson <dianders@xxxxxxxxxxxx>
[ Upstream commit d6e1935819db0c91ce4a5af82466f3ab50d17346 ]
Right now serial drivers process sysrq keys deep in their character
receiving code. This means that they've already grabbed their
port->lock spinlock. This can end up getting in the way if we've go
to do serial stuff (especially kgdb) in response to the sysrq.
Serial drivers have various hacks in them to handle this. Looking at
'8250_port.c' you can see that the console_write() skips locking if
we're in the sysrq handler. Looking at 'msm_serial.c' you can see
that the port lock is dropped around uart_handle_sysrq_char().
It turns out that these hacks aren't exactly perfect. If you have
lockdep turned on and use something like the 8250_port hack you'll get
a splat that looks like:
WARNING: possible circular locking dependency detected
[...] is trying to acquire lock:
... (console_owner){-.-.}, at: console_unlock+0x2e0/0x5e4
but task is already holding lock:
... (&port_lock_key){-.-.}, at: serial8250_handle_irq+0x30/0xe4
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (&port_lock_key){-.-.}:
_raw_spin_lock_irqsave+0x58/0x70
serial8250_console_write+0xa8/0x250
univ8250_console_write+0x40/0x4c
console_unlock+0x528/0x5e4
register_console+0x2c4/0x3b0
uart_add_one_port+0x350/0x478
serial8250_register_8250_port+0x350/0x3a8
dw8250_probe+0x67c/0x754
platform_drv_probe+0x58/0xa4
really_probe+0x150/0x294
driver_probe_device+0xac/0xe8
__driver_attach+0x98/0xd0
bus_for_each_dev+0x84/0xc8
driver_attach+0x2c/0x34
bus_add_driver+0xf0/0x1ec
driver_register+0xb4/0x100
__platform_driver_register+0x60/0x6c
dw8250_platform_driver_init+0x20/0x28
...
-> #0 (console_owner){-.-.}:
lock_acquire+0x1e8/0x214
console_unlock+0x35c/0x5e4
vprintk_emit+0x230/0x274
vprintk_default+0x7c/0x84
vprintk_func+0x190/0x1bc
printk+0x80/0xa0
__handle_sysrq+0x104/0x21c
handle_sysrq+0x30/0x3c
serial8250_read_char+0x15c/0x18c
serial8250_rx_chars+0x34/0x74
serial8250_handle_irq+0x9c/0xe4
dw8250_handle_irq+0x98/0xcc
serial8250_interrupt+0x50/0xe8
...
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&port_lock_key);
lock(console_owner);
lock(&port_lock_key);
lock(console_owner);
*** DEADLOCK ***
The hack used in 'msm_serial.c' doesn't cause the above splats but it
seems a bit ugly to unlock / lock our spinlock deep in our irq
handler.
It seems like we could defer processing the sysrq until the end of the
interrupt handler right after we've unlocked the port. With this
scheme if a whole batch of sysrq characters comes in one irq then we
won't handle them all, but that seems like it should be a fine
compromise.
Signed-off-by: Douglas Anderson <dianders@xxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
include/linux/serial_core.h | 37 ++++++++++++++++++++++++++++++++++++-
1 file changed, 36 insertions(+), 1 deletion(-)
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index 406edae44ca3..3460b15a2607 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -173,6 +173,7 @@ struct uart_port {
struct console *cons; /* struct console, if any */
#if defined(CONFIG_SERIAL_CORE_CONSOLE) || defined(SUPPORT_SYSRQ)
unsigned long sysrq; /* sysrq timeout */
+ unsigned int sysrq_ch; /* char for sysrq */
#endif
/* flags must be updated while holding port mutex */
@@ -482,8 +483,42 @@ uart_handle_sysrq_char(struct uart_port *port, unsigned int ch)
}
return 0;
}
+static inline int
+uart_prepare_sysrq_char(struct uart_port *port, unsigned int ch)
+{
+ if (port->sysrq) {
+ if (ch && time_before(jiffies, port->sysrq)) {
+ port->sysrq_ch = ch;
+ port->sysrq = 0;
+ return 1;
+ }
+ port->sysrq = 0;
+ }
+ return 0;
+}
+static inline void
+uart_unlock_and_check_sysrq(struct uart_port *port, unsigned long irqflags)
+{
+ int sysrq_ch;
+
+ sysrq_ch = port->sysrq_ch;
+ port->sysrq_ch = 0;
+
+ spin_unlock_irqrestore(&port->lock, irqflags);
+
+ if (sysrq_ch)
+ handle_sysrq(sysrq_ch);
+}
#else
-#define uart_handle_sysrq_char(port,ch) ({ (void)port; 0; })
+static inline int
+uart_handle_sysrq_char(struct uart_port *port, unsigned int ch) { return 0; }
+static inline int
+uart_prepare_sysrq_char(struct uart_port *port, unsigned int ch) { return 0; }
+static inline void
+uart_unlock_and_check_sysrq(struct uart_port *port, unsigned long irqflags)
+{
+ spin_unlock_irqrestore(&port->lock, irqflags);
+}
#endif
/*
--
2.19.1
