From: Kai-Heng Feng <kai.heng.feng@xxxxxxxxxxxxx> [ Upstream commit 1fb3a7a75e2efcc83ef21f2434069cddd6fae6f5 ] I210 ethernet card doesn't wakeup when a cable gets plugged. It's because its PME is not set. Since commit 42eca2302146 ("PCI: Don't touch card regs after runtime suspend D3"), if the PCI state is saved, pci_pm_runtime_suspend() stops calling pci_finish_runtime_suspend(), which enables the PCI PME. To fix the issue, let's not to save PCI states when it's runtime suspend, to let the PCI subsystem enables PME. Fixes: 42eca2302146 ("PCI: Don't touch card regs after runtime suspend D3") Signed-off-by: Kai-Heng Feng <kai.heng.feng@xxxxxxxxxxxxx> Tested-by: Aaron Brown <aaron.f.brown@xxxxxxxxx> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@xxxxxxxxx> Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> --- drivers/net/ethernet/intel/igb/igb_main.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c index 02b23f6277fb..c1796aa2dde5 100644 --- a/drivers/net/ethernet/intel/igb/igb_main.c +++ b/drivers/net/ethernet/intel/igb/igb_main.c @@ -7339,9 +7339,11 @@ static int __igb_shutdown(struct pci_dev *pdev, bool *enable_wake, rtnl_unlock(); #ifdef CONFIG_PM - retval = pci_save_state(pdev); - if (retval) - return retval; + if (!runtime) { + retval = pci_save_state(pdev); + if (retval) + return retval; + } #endif status = rd32(E1000_STATUS); -- 2.19.1