During hotplug test on platform, found slot status register does not report present status correctly. That present bit does not get cleared even after that card is removed. That problem is caused by commit: | commit 2debd9289997fc5d1c0043b41201a8b40d5e11d0 | | PCI: pciehp: Disable/enable link during slot power off/on It looks like chipset bug, that PresDet bit is "OR" operation between sideband input from FPGA, and chipset inband detection from pcie link. It does not like if we disable pcie link at first and power off other side device, and it has input from inband detection always 1. Workaround: Try turn on link a while after power off. After this patch, PresDet report correct status when removing or adding card later. Signed-off-by: Yinghai Lu <yinghai@xxxxxxxxxx> Cc: Kenji Kaneshige <kaneshige.kenji@xxxxxxxxxxxxxx> Cc: <stable@xxxxxxxxxxxxxxx> 3.4+ --- drivers/pci/hotplug/pciehp_hpc.c | 9 +++++++++ 1 file changed, 9 insertions(+) Index: linux-2.6/drivers/pci/hotplug/pciehp_hpc.c =================================================================== --- linux-2.6.orig/drivers/pci/hotplug/pciehp_hpc.c +++ linux-2.6/drivers/pci/hotplug/pciehp_hpc.c @@ -637,6 +637,15 @@ int pciehp_power_off_slot(struct slot * } ctrl_dbg(ctrl, "%s: SLOTCTRL %x write cmd %x\n", __func__, pci_pcie_cap(ctrl->pcie->port) + PCI_EXP_SLTCTL, slot_cmd); + + /* + * Enable link for a while so chipset could settle down + * inband presence detection logic + */ + pciehp_link_enable(ctrl); + msleep(20); + pciehp_link_disable(ctrl); + return 0; } -- To unsubscribe from this list: send the line "unsubscribe stable" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html