This is a note to let you know that I've just added the patch titled
USB: serial: ftdi_sio: fix GPIO not working in autosuspend
to my usb git tree which can be found at
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git
in the usb-linus branch.
The patch will show up in the next release of the linux-next tree
(usually sometime within the next 24 hours during the week.)
The patch will hopefully also be merged in Linus's tree for the
next -rc kernel release.
If you have any questions about this process, please let me know.
>From a8eda9fa1bd84065b75bfa81bf675a7af9055478 Mon Sep 17 00:00:00 2001
From: Karoly Pados <pados@xxxxxxxx>
Date: Mon, 14 Jan 2019 13:30:03 +0100
Subject: USB: serial: ftdi_sio: fix GPIO not working in autosuspend
There is a bug in the current GPIO code for ftdi_sio: it failed to take USB
autosuspend into account. If the device is in autosuspend, calls to
usb_control_msg() fail with -EHOSTUNREACH. Because the standard value for
autosuspend timeout is usually 2-5 seconds, this made it almost impossible
to use the GPIOs on machines that have USB autosuspend enabled. This patch
fixes the issue by acquiring a PM lock on the device for the duration of
the USB transfers. Tested on an FT231X device.
Signed-off-by: Karoly Pados <pados@xxxxxxxx>
[ johan: simplify code somewhat ]
Fixes: ba93cc7da896 ("USB: serial: ftdi_sio: implement GPIO support for FT-X devices")
Cc: stable <stable@xxxxxxxxxxxxxxx> # 4.20
Signed-off-by: Johan Hovold <johan@xxxxxxxxxx>
---
drivers/usb/serial/ftdi_sio.c | 15 ++++++++++++++-
1 file changed, 14 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 1ab2a6191013..77ef4c481f3c 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -1783,6 +1783,10 @@ static int ftdi_set_bitmode(struct usb_serial_port *port, u8 mode)
int result;
u16 val;
+ result = usb_autopm_get_interface(serial->interface);
+ if (result)
+ return result;
+
val = (mode << 8) | (priv->gpio_output << 4) | priv->gpio_value;
result = usb_control_msg(serial->dev,
usb_sndctrlpipe(serial->dev, 0),
@@ -1795,6 +1799,8 @@ static int ftdi_set_bitmode(struct usb_serial_port *port, u8 mode)
val, result);
}
+ usb_autopm_put_interface(serial->interface);
+
return result;
}
@@ -1846,9 +1852,15 @@ static int ftdi_read_cbus_pins(struct usb_serial_port *port)
unsigned char *buf;
int result;
+ result = usb_autopm_get_interface(serial->interface);
+ if (result)
+ return result;
+
buf = kmalloc(1, GFP_KERNEL);
- if (!buf)
+ if (!buf) {
+ usb_autopm_put_interface(serial->interface);
return -ENOMEM;
+ }
result = usb_control_msg(serial->dev,
usb_rcvctrlpipe(serial->dev, 0),
@@ -1863,6 +1875,7 @@ static int ftdi_read_cbus_pins(struct usb_serial_port *port)
}
kfree(buf);
+ usb_autopm_put_interface(serial->interface);
return result;
}
--
2.20.1
