This is a note to let you know that I've just added the patch titled
USB: storage: don't insert sane sense for SPC3+ when bad sense
to my usb git tree which can be found at
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git
in the usb-linus branch.
The patch will show up in the next release of the linux-next tree
(usually sometime within the next 24 hours during the week.)
The patch will hopefully also be merged in Linus's tree for the
next -rc kernel release.
If you have any questions about this process, please let me know.
>From c5603d2fdb424849360fe7e3f8c1befc97571b8c Mon Sep 17 00:00:00 2001
From: Icenowy Zheng <icenowy@xxxxxxx>
Date: Thu, 3 Jan 2019 11:26:17 +0800
Subject: USB: storage: don't insert sane sense for SPC3+ when bad sense
specified
Currently the code will set US_FL_SANE_SENSE flag unconditionally if
device claims SPC3+, however we should allow US_FL_BAD_SENSE flag to
prevent this behavior, because SMI SM3350 UFS-USB bridge controller,
which claims SPC4, will show strange behavior with 96-byte sense
(put the chip into a wrong state that cannot read/write anything).
Check the presence of US_FL_BAD_SENSE when assuming US_FL_SANE_SENSE on
SPC4+ devices.
Signed-off-by: Icenowy Zheng <icenowy@xxxxxxx>
Cc: stable <stable@xxxxxxxxxxxxxxx>
Acked-by: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/usb/storage/scsiglue.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c
index fde2e71a6ade..a73ea495d5a7 100644
--- a/drivers/usb/storage/scsiglue.c
+++ b/drivers/usb/storage/scsiglue.c
@@ -235,8 +235,12 @@ static int slave_configure(struct scsi_device *sdev)
if (!(us->fflags & US_FL_NEEDS_CAP16))
sdev->try_rc_10_first = 1;
- /* assume SPC3 or latter devices support sense size > 18 */
- if (sdev->scsi_level > SCSI_SPC_2)
+ /*
+ * assume SPC3 or latter devices support sense size > 18
+ * unless US_FL_BAD_SENSE quirk is specified.
+ */
+ if (sdev->scsi_level > SCSI_SPC_2 &&
+ !(us->fflags & US_FL_BAD_SENSE))
us->fflags |= US_FL_SANE_SENSE;
/*
--
2.20.1
