On 27/12/18 1:20 PM, BOUGH CHEN wrote:
> Now tuning reset will be done when the timing is MMC_TIMING_LEGACY/
> MMC_TIMING_MMC_HS/MMC_TIMING_SD_HS. But for timing MMC_TIMING_MMC_HS,
> we can not do tuning reset, otherwise HS400 timing is not right.
>
> Here is the process of init HS400, first finish tuning in HS200 mode,
> then switch to HS mode and 8 bit DDR mode, finally switch to HS400
> mode. If we do tuning reset in HS mode, this will cause HS400 mode
> lost the tuning setting, which will cause CRC error.
>
> This fix commit d9370424c948 ("mmc: sdhci-esdhc-imx: reset tuning
> circuit when power on mmc card").
>
> Signed-off-by: Haibo Chen <haibo.chen@xxxxxxx>
> Cc: stable@xxxxxxxxxxxxxxx # v4.12+
Acked-by: Adrian Hunter <adrian.hunter@xxxxxxxxx>
> ---
> drivers/mmc/host/sdhci-esdhc-imx.c | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c
> index d0d319398a54..984cc1a788cb 100644
> --- a/drivers/mmc/host/sdhci-esdhc-imx.c
> +++ b/drivers/mmc/host/sdhci-esdhc-imx.c
> @@ -979,6 +979,7 @@ static void esdhc_set_uhs_signaling(struct sdhci_host *host, unsigned timing)
> case MMC_TIMING_UHS_SDR25:
> case MMC_TIMING_UHS_SDR50:
> case MMC_TIMING_UHS_SDR104:
> + case MMC_TIMING_MMC_HS:
> case MMC_TIMING_MMC_HS200:
> writel(m, host->ioaddr + ESDHC_MIX_CTRL);
> break;
>
