[PATCH AUTOSEL 4.19 049/123] phy: qcom-qusb2: Use HSTX_TRIM fused value as is

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Manu Gautam <mgautam@xxxxxxxxxxxxxx>

[ Upstream commit 6e34d358b24ffc40764eb3681164c79091765429 ]

Fix HSTX_TRIM tuning logic which instead of using fused value
as HSTX_TRIM, incorrectly performs bitwise OR operation with
existing default value.

Fixes: ca04d9d3e1b1 ("phy: qcom-qusb2: New driver for QUSB2 PHY on Qcom chips")
Signed-off-by: Manu Gautam <mgautam@xxxxxxxxxxxxxx>
Reviewed-by: Douglas Anderson <dianders@xxxxxxxxxxxx>
Reviewed-by: Stephen Boyd <swboyd@xxxxxxxxxxxx>
Acked-by: Vivek Gautam <vivek.gautam@xxxxxxxxxxxxxx>
Signed-off-by: Kishon Vijay Abraham I <kishon@xxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
 drivers/phy/qualcomm/phy-qcom-qusb2.c | 19 ++++++++++---------
 1 file changed, 10 insertions(+), 9 deletions(-)

diff --git a/drivers/phy/qualcomm/phy-qcom-qusb2.c b/drivers/phy/qualcomm/phy-qcom-qusb2.c
index e70e425f26f5..9d6c88064158 100644
--- a/drivers/phy/qualcomm/phy-qcom-qusb2.c
+++ b/drivers/phy/qualcomm/phy-qcom-qusb2.c
@@ -402,10 +402,10 @@ static void qusb2_phy_set_tune2_param(struct qusb2_phy *qphy)
 
 	/*
 	 * Read efuse register having TUNE2/1 parameter's high nibble.
-	 * If efuse register shows value as 0x0, or if we fail to find
-	 * a valid efuse register settings, then use default value
-	 * as 0xB for high nibble that we have already set while
-	 * configuring phy.
+	 * If efuse register shows value as 0x0 (indicating value is not
+	 * fused), or if we fail to find a valid efuse register setting,
+	 * then use default value for high nibble that we have already
+	 * set while configuring the phy.
 	 */
 	val = nvmem_cell_read(qphy->cell, NULL);
 	if (IS_ERR(val) || !val[0]) {
@@ -415,12 +415,13 @@ static void qusb2_phy_set_tune2_param(struct qusb2_phy *qphy)
 
 	/* Fused TUNE1/2 value is the higher nibble only */
 	if (cfg->update_tune1_with_efuse)
-		qusb2_setbits(qphy->base, cfg->regs[QUSB2PHY_PORT_TUNE1],
-			      val[0] << 0x4);
+		qusb2_write_mask(qphy->base, cfg->regs[QUSB2PHY_PORT_TUNE1],
+				 val[0] << HSTX_TRIM_SHIFT,
+				 HSTX_TRIM_MASK);
 	else
-		qusb2_setbits(qphy->base, cfg->regs[QUSB2PHY_PORT_TUNE2],
-			      val[0] << 0x4);
-
+		qusb2_write_mask(qphy->base, cfg->regs[QUSB2PHY_PORT_TUNE2],
+				 val[0] << HSTX_TRIM_SHIFT,
+				 HSTX_TRIM_MASK);
 }
 
 static int qusb2_phy_set_mode(struct phy *phy, enum phy_mode mode)
-- 
2.17.1




[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux