Re: Linux 4.4.166

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



diff --git a/Documentation/sysctl/fs.txt b/Documentation/sysctl/fs.txt
index 35e17f748ca7..af5859b2d0f9 100644
--- a/Documentation/sysctl/fs.txt
+++ b/Documentation/sysctl/fs.txt
@@ -34,7 +34,9 @@ Currently, these files are in /proc/sys/fs:
 - overflowgid
 - pipe-user-pages-hard
 - pipe-user-pages-soft
+- protected_fifos
 - protected_hardlinks
+- protected_regular
 - protected_symlinks
 - suid_dumpable
 - super-max
@@ -182,6 +184,24 @@ applied.
 
 ==============================================================
 
+protected_fifos:
+
+The intent of this protection is to avoid unintentional writes to
+an attacker-controlled FIFO, where a program expected to create a regular
+file.
+
+When set to "0", writing to FIFOs is unrestricted.
+
+When set to "1" don't allow O_CREAT open on FIFOs that we don't own
+in world writable sticky directories, unless they are owned by the
+owner of the directory.
+
+When set to "2" it also applies to group writable sticky directories.
+
+This protection is based on the restrictions in Openwall.
+
+==============================================================
+
 protected_hardlinks:
 
 A long-standing class of security issues is the hardlink-based
@@ -202,6 +222,22 @@ This protection is based on the restrictions in Openwall and grsecurity.
 
 ==============================================================
 
+protected_regular:
+
+This protection is similar to protected_fifos, but it
+avoids writes to an attacker-controlled regular file, where a program
+expected to create one.
+
+When set to "0", writing to regular files is unrestricted.
+
+When set to "1" don't allow O_CREAT open on regular files that we
+don't own in world writable sticky directories, unless they are
+owned by the owner of the directory.
+
+When set to "2" it also applies to group writable sticky directories.
+
+==============================================================
+
 protected_symlinks:
 
 A long-standing class of security issues is the symlink-based
diff --git a/MAINTAINERS b/MAINTAINERS
index ab65bbecb159..f4d4a5544dc1 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -10135,6 +10135,7 @@ F:	arch/alpha/kernel/srm_env.c
 
 STABLE BRANCH
 M:	Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
+M:	Sasha Levin <sashal@xxxxxxxxxx>
 L:	stable@xxxxxxxxxxxxxxx
 S:	Supported
 F:	Documentation/stable_kernel_rules.txt
diff --git a/Makefile b/Makefile
index 441a760dc5a4..64521458d35e 100644
--- a/Makefile
+++ b/Makefile
@@ -1,6 +1,6 @@
 VERSION = 4
 PATCHLEVEL = 4
-SUBLEVEL = 165
+SUBLEVEL = 166
 EXTRAVERSION =
 NAME = Blurry Fish Butt
 
diff --git a/arch/arm64/Makefile b/arch/arm64/Makefile
index c10bb98144b0..fb4ac87fc398 100644
--- a/arch/arm64/Makefile
+++ b/arch/arm64/Makefile
@@ -10,7 +10,7 @@
 #
 # Copyright (C) 1995-2001 by Russell King
 
-LDFLAGS_vmlinux	:=-p --no-undefined -X
+LDFLAGS_vmlinux	:=--no-undefined -X
 CPPFLAGS_vmlinux.lds = -DTEXT_OFFSET=$(TEXT_OFFSET)
 OBJCOPYFLAGS	:=-O binary -R .note -R .note.gnu.build-id -R .comment -S
 GZFLAGS		:=-9
diff --git a/arch/powerpc/kvm/trace.h b/arch/powerpc/kvm/trace.h
index 2e0e67ef3544..e8cedf32345a 100644
--- a/arch/powerpc/kvm/trace.h
+++ b/arch/powerpc/kvm/trace.h
@@ -5,8 +5,6 @@
 
 #undef TRACE_SYSTEM
 #define TRACE_SYSTEM kvm
-#define TRACE_INCLUDE_PATH .
-#define TRACE_INCLUDE_FILE trace
 
 /*
  * Tracepoint for guest mode entry.
@@ -119,4 +117,10 @@ TRACE_EVENT(kvm_check_requests,
 #endif /* _TRACE_KVM_H */
 
 /* This part must be outside protection */
+#undef TRACE_INCLUDE_PATH
+#undef TRACE_INCLUDE_FILE
+
+#define TRACE_INCLUDE_PATH .
+#define TRACE_INCLUDE_FILE trace
+
 #include <trace/define_trace.h>
diff --git a/arch/powerpc/kvm/trace_booke.h b/arch/powerpc/kvm/trace_booke.h
index 7ec534d1db9f..7eadbf449a1f 100644
--- a/arch/powerpc/kvm/trace_booke.h
+++ b/arch/powerpc/kvm/trace_booke.h
@@ -5,8 +5,6 @@
 
 #undef TRACE_SYSTEM
 #define TRACE_SYSTEM kvm_booke
-#define TRACE_INCLUDE_PATH .
-#define TRACE_INCLUDE_FILE trace_booke
 
 #define kvm_trace_symbol_exit \
 	{0, "CRITICAL"}, \
@@ -217,4 +215,11 @@ TRACE_EVENT(kvm_booke_queue_irqprio,
 #endif
 
 /* This part must be outside protection */
+
+#undef TRACE_INCLUDE_PATH
+#undef TRACE_INCLUDE_FILE
+
+#define TRACE_INCLUDE_PATH .
+#define TRACE_INCLUDE_FILE trace_booke
+
 #include <trace/define_trace.h>
diff --git a/arch/powerpc/kvm/trace_hv.h b/arch/powerpc/kvm/trace_hv.h
index 33d9daff5783..d1bfe017d751 100644
--- a/arch/powerpc/kvm/trace_hv.h
+++ b/arch/powerpc/kvm/trace_hv.h
@@ -8,8 +8,6 @@
 
 #undef TRACE_SYSTEM
 #define TRACE_SYSTEM kvm_hv
-#define TRACE_INCLUDE_PATH .
-#define TRACE_INCLUDE_FILE trace_hv
 
 #define kvm_trace_symbol_hcall \
 	{H_REMOVE,			"H_REMOVE"}, \
@@ -474,4 +472,11 @@ TRACE_EVENT(kvmppc_run_vcpu_exit,
 #endif /* _TRACE_KVM_HV_H */
 
 /* This part must be outside protection */
+
+#undef TRACE_INCLUDE_PATH
+#undef TRACE_INCLUDE_FILE
+
+#define TRACE_INCLUDE_PATH .
+#define TRACE_INCLUDE_FILE trace_hv
+
 #include <trace/define_trace.h>
diff --git a/arch/powerpc/kvm/trace_pr.h b/arch/powerpc/kvm/trace_pr.h
index 810507cb688a..1e40aa2aa5af 100644
--- a/arch/powerpc/kvm/trace_pr.h
+++ b/arch/powerpc/kvm/trace_pr.h
@@ -7,8 +7,6 @@
 
 #undef TRACE_SYSTEM
 #define TRACE_SYSTEM kvm_pr
-#define TRACE_INCLUDE_PATH .
-#define TRACE_INCLUDE_FILE trace_pr
 
 TRACE_EVENT(kvm_book3s_reenter,
 	TP_PROTO(int r, struct kvm_vcpu *vcpu),
@@ -271,4 +269,11 @@ TRACE_EVENT(kvm_unmap_hva,
 #endif /* _TRACE_KVM_H */
 
 /* This part must be outside protection */
+
+#undef TRACE_INCLUDE_PATH
+#undef TRACE_INCLUDE_FILE
+
+#define TRACE_INCLUDE_PATH .
+#define TRACE_INCLUDE_FILE trace_pr
+
 #include <trace/define_trace.h>
diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c
index 3c4faa4c2742..bb3df222ae71 100644
--- a/arch/powerpc/mm/numa.c
+++ b/arch/powerpc/mm/numa.c
@@ -1319,7 +1319,7 @@ static long vphn_get_associativity(unsigned long cpu,
 
 	switch (rc) {
 	case H_FUNCTION:
-		printk(KERN_INFO
+		printk_once(KERN_INFO
 			"VPHN is not supported. Disabling polling...\n");
 		stop_topology_update();
 		break;
diff --git a/arch/s390/mm/pgtable.c b/arch/s390/mm/pgtable.c
index 05ae254f84cf..1866b6a5171a 100644
--- a/arch/s390/mm/pgtable.c
+++ b/arch/s390/mm/pgtable.c
@@ -637,6 +637,8 @@ void gmap_discard(struct gmap *gmap, unsigned long from, unsigned long to)
 		vmaddr |= gaddr & ~PMD_MASK;
 		/* Find vma in the parent mm */
 		vma = find_vma(gmap->mm, vmaddr);
+		if (!vma)
+			continue;
 		size = min(to - gaddr, PMD_SIZE - (gaddr & ~PMD_MASK));
 		zap_page_range(vma, vmaddr, size, NULL);
 	}
diff --git a/arch/x86/entry/entry_64.S b/arch/x86/entry/entry_64.S
index 8be48b1d7596..375ed605c83d 100644
--- a/arch/x86/entry/entry_64.S
+++ b/arch/x86/entry/entry_64.S
@@ -856,7 +856,7 @@ ENTRY(\sym)
 
 	call	\do_sym
 
-	jmp	error_exit			/* %ebx: no swapgs flag */
+	jmp	error_exit
 	.endif
 END(\sym)
 .endm
@@ -1118,7 +1118,6 @@ END(paranoid_exit)
 
 /*
  * Save all registers in pt_regs, and switch gs if needed.
- * Return: EBX=0: came from user mode; EBX=1: otherwise
  */
 ENTRY(error_entry)
 	cld
@@ -1131,7 +1130,6 @@ ENTRY(error_entry)
 	 * the kernel CR3 here.
 	 */
 	SWITCH_KERNEL_CR3
-	xorl	%ebx, %ebx
 	testb	$3, CS+8(%rsp)
 	jz	.Lerror_kernelspace
 
@@ -1165,7 +1163,6 @@ ENTRY(error_entry)
 	 * for these here too.
 	 */
 .Lerror_kernelspace:
-	incl	%ebx
 	leaq	native_irq_return_iret(%rip), %rcx
 	cmpq	%rcx, RIP+8(%rsp)
 	je	.Lerror_bad_iret
@@ -1196,28 +1193,19 @@ ENTRY(error_entry)
 
 	/*
 	 * Pretend that the exception came from user mode: set up pt_regs
-	 * as if we faulted immediately after IRET and clear EBX so that
-	 * error_exit knows that we will be returning to user mode.
+	 * as if we faulted immediately after IRET.
 	 */
 	mov	%rsp, %rdi
 	call	fixup_bad_iret
 	mov	%rax, %rsp
-	decl	%ebx
 	jmp	.Lerror_entry_from_usermode_after_swapgs
 END(error_entry)
 
-
-/*
- * On entry, EBS is a "return to kernel mode" flag:
- *   1: already in kernel mode, don't need SWAPGS
- *   0: user gsbase is loaded, we need SWAPGS and standard preparation for return to usermode
- */
 ENTRY(error_exit)
-	movl	%ebx, %eax
 	DISABLE_INTERRUPTS(CLBR_NONE)
 	TRACE_IRQS_OFF
-	testl	%eax, %eax
-	jnz	retint_kernel
+	testb	$3, CS(%rsp)
+	jz	retint_kernel
 	jmp	retint_user
 END(error_exit)
 
diff --git a/drivers/cpufreq/imx6q-cpufreq.c b/drivers/cpufreq/imx6q-cpufreq.c
index ef1fa8145419..fa86946d12aa 100644
--- a/drivers/cpufreq/imx6q-cpufreq.c
+++ b/drivers/cpufreq/imx6q-cpufreq.c
@@ -130,8 +130,13 @@ static int imx6q_set_target(struct cpufreq_policy *policy, unsigned int index)
 	/* Ensure the arm clock divider is what we expect */
 	ret = clk_set_rate(arm_clk, new_freq * 1000);
 	if (ret) {
+		int ret1;
+
 		dev_err(cpu_dev, "failed to set clock rate: %d\n", ret);
-		regulator_set_voltage_tol(arm_reg, volt_old, 0);
+		ret1 = regulator_set_voltage_tol(arm_reg, volt_old, 0);
+		if (ret1)
+			dev_warn(cpu_dev,
+				 "failed to restore vddarm voltage: %d\n", ret1);
 		return ret;
 	}
 
diff --git a/drivers/gpu/drm/ast/ast_drv.c b/drivers/gpu/drm/ast/ast_drv.c
index 9a32d9dfdd26..011700262824 100644
--- a/drivers/gpu/drm/ast/ast_drv.c
+++ b/drivers/gpu/drm/ast/ast_drv.c
@@ -60,8 +60,29 @@ static const struct pci_device_id pciidlist[] = {
 
 MODULE_DEVICE_TABLE(pci, pciidlist);
 
+static void ast_kick_out_firmware_fb(struct pci_dev *pdev)
+{
+	struct apertures_struct *ap;
+	bool primary = false;
+
+	ap = alloc_apertures(1);
+	if (!ap)
+		return;
+
+	ap->ranges[0].base = pci_resource_start(pdev, 0);
+	ap->ranges[0].size = pci_resource_len(pdev, 0);
+
+#ifdef CONFIG_X86
+	primary = pdev->resource[PCI_ROM_RESOURCE].flags & IORESOURCE_ROM_SHADOW;
+#endif
+	remove_conflicting_framebuffers(ap, "astdrmfb", primary);
+	kfree(ap);
+}
+
 static int ast_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 {
+	ast_kick_out_firmware_fb(pdev);
+
 	return drm_get_pci_dev(pdev, ent, &driver);
 }
 
diff --git a/drivers/gpu/drm/ast/ast_mode.c b/drivers/gpu/drm/ast/ast_mode.c
index 69d19f3304a5..21085f669e21 100644
--- a/drivers/gpu/drm/ast/ast_mode.c
+++ b/drivers/gpu/drm/ast/ast_mode.c
@@ -552,6 +552,7 @@ static int ast_crtc_do_set_base(struct drm_crtc *crtc,
 	}
 	ast_bo_unreserve(bo);
 
+	ast_set_offset_reg(crtc);
 	ast_set_start_address_crt1(crtc, (u32)gpu_addr);
 
 	return 0;
@@ -1249,7 +1250,7 @@ static int ast_cursor_move(struct drm_crtc *crtc,
 	ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0xc7, ((y >> 8) & 0x07));
 
 	/* dummy write to fire HWC */
-	ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xCB, 0xFF, 0x00);
+	ast_show_cursor(crtc);
 
 	return 0;
 }
diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c
index 3258baf3282e..2e52015634f9 100644
--- a/drivers/input/joystick/xpad.c
+++ b/drivers/input/joystick/xpad.c
@@ -76,18 +76,23 @@
  */
 
 #include <linux/kernel.h>
+#include <linux/input.h>
+#include <linux/rcupdate.h>
 #include <linux/slab.h>
 #include <linux/stat.h>
 #include <linux/module.h>
 #include <linux/usb/input.h>
+#include <linux/usb/quirks.h>
 
 #define DRIVER_AUTHOR "Marko Friedemann <mfr@xxxxxxxxxxxxxxx>"
 #define DRIVER_DESC "X-Box pad driver"
 
-#define XPAD_PKT_LEN 32
+#define XPAD_PKT_LEN 64
 
-/* xbox d-pads should map to buttons, as is required for DDR pads
-   but we map them to axes when possible to simplify things */
+/*
+ * xbox d-pads should map to buttons, as is required for DDR pads
+ * but we map them to axes when possible to simplify things
+ */
 #define MAP_DPAD_TO_BUTTONS		(1 << 0)
 #define MAP_TRIGGERS_TO_BUTTONS		(1 << 1)
 #define MAP_STICKS_TO_NULL		(1 << 2)
@@ -112,6 +117,10 @@ static bool sticks_to_null;
 module_param(sticks_to_null, bool, S_IRUGO);
 MODULE_PARM_DESC(sticks_to_null, "Do not map sticks at all for unknown pads");
 
+static bool auto_poweroff = true;
+module_param(auto_poweroff, bool, S_IWUSR | S_IRUGO);
+MODULE_PARM_DESC(auto_poweroff, "Power off wireless controllers on suspend");
+
 static const struct xpad_device {
 	u16 idVendor;
 	u16 idProduct;
@@ -119,43 +128,77 @@ static const struct xpad_device {
 	u8 mapping;
 	u8 xtype;
 } xpad_device[] = {
+	{ 0x0079, 0x18d4, "GPD Win 2 X-Box Controller", 0, XTYPE_XBOX360 },
+	{ 0x044f, 0x0f00, "Thrustmaster Wheel", 0, XTYPE_XBOX },
+	{ 0x044f, 0x0f03, "Thrustmaster Wheel", 0, XTYPE_XBOX },
+	{ 0x044f, 0x0f07, "Thrustmaster, Inc. Controller", 0, XTYPE_XBOX },
+	{ 0x044f, 0x0f10, "Thrustmaster Modena GT Wheel", 0, XTYPE_XBOX },
+	{ 0x044f, 0xb326, "Thrustmaster Gamepad GP XID", 0, XTYPE_XBOX360 },
 	{ 0x045e, 0x0202, "Microsoft X-Box pad v1 (US)", 0, XTYPE_XBOX },
 	{ 0x045e, 0x0285, "Microsoft X-Box pad (Japan)", 0, XTYPE_XBOX },
 	{ 0x045e, 0x0287, "Microsoft Xbox Controller S", 0, XTYPE_XBOX },
+	{ 0x045e, 0x0288, "Microsoft Xbox Controller S v2", 0, XTYPE_XBOX },
 	{ 0x045e, 0x0289, "Microsoft X-Box pad v2 (US)", 0, XTYPE_XBOX },
 	{ 0x045e, 0x028e, "Microsoft X-Box 360 pad", 0, XTYPE_XBOX360 },
-	{ 0x045e, 0x02d1, "Microsoft X-Box One pad", 0, XTYPE_XBOXONE },
-	{ 0x045e, 0x02dd, "Microsoft X-Box One pad (Covert Forces)", 0, XTYPE_XBOXONE },
+	{ 0x045e, 0x028f, "Microsoft X-Box 360 pad v2", 0, XTYPE_XBOX360 },
 	{ 0x045e, 0x0291, "Xbox 360 Wireless Receiver (XBOX)", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360W },
+	{ 0x045e, 0x02d1, "Microsoft X-Box One pad", 0, XTYPE_XBOXONE },
+	{ 0x045e, 0x02dd, "Microsoft X-Box One pad (Firmware 2015)", 0, XTYPE_XBOXONE },
+	{ 0x045e, 0x02e3, "Microsoft X-Box One Elite pad", 0, XTYPE_XBOXONE },
+	{ 0x045e, 0x02ea, "Microsoft X-Box One S pad", 0, XTYPE_XBOXONE },
 	{ 0x045e, 0x0719, "Xbox 360 Wireless Receiver", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360W },
-	{ 0x044f, 0x0f07, "Thrustmaster, Inc. Controller", 0, XTYPE_XBOX },
-	{ 0x044f, 0xb326, "Thrustmaster Gamepad GP XID", 0, XTYPE_XBOX360 },
 	{ 0x046d, 0xc21d, "Logitech Gamepad F310", 0, XTYPE_XBOX360 },
 	{ 0x046d, 0xc21e, "Logitech Gamepad F510", 0, XTYPE_XBOX360 },
 	{ 0x046d, 0xc21f, "Logitech Gamepad F710", 0, XTYPE_XBOX360 },
 	{ 0x046d, 0xc242, "Logitech Chillstream Controller", 0, XTYPE_XBOX360 },
 	{ 0x046d, 0xca84, "Logitech Xbox Cordless Controller", 0, XTYPE_XBOX },
 	{ 0x046d, 0xca88, "Logitech Compact Controller for Xbox", 0, XTYPE_XBOX },
+	{ 0x046d, 0xca8a, "Logitech Precision Vibration Feedback Wheel", 0, XTYPE_XBOX },
+	{ 0x046d, 0xcaa3, "Logitech DriveFx Racing Wheel", 0, XTYPE_XBOX360 },
+	{ 0x056e, 0x2004, "Elecom JC-U3613M", 0, XTYPE_XBOX360 },
 	{ 0x05fd, 0x1007, "Mad Catz Controller (unverified)", 0, XTYPE_XBOX },
 	{ 0x05fd, 0x107a, "InterAct 'PowerPad Pro' X-Box pad (Germany)", 0, XTYPE_XBOX },
+	{ 0x05fe, 0x3030, "Chic Controller", 0, XTYPE_XBOX },
+	{ 0x05fe, 0x3031, "Chic Controller", 0, XTYPE_XBOX },
+	{ 0x062a, 0x0020, "Logic3 Xbox GamePad", 0, XTYPE_XBOX },
+	{ 0x062a, 0x0033, "Competition Pro Steering Wheel", 0, XTYPE_XBOX },
+	{ 0x06a3, 0x0200, "Saitek Racing Wheel", 0, XTYPE_XBOX },
+	{ 0x06a3, 0x0201, "Saitek Adrenalin", 0, XTYPE_XBOX },
+	{ 0x06a3, 0xf51a, "Saitek P3600", 0, XTYPE_XBOX360 },
+	{ 0x0738, 0x4506, "Mad Catz 4506 Wireless Controller", 0, XTYPE_XBOX },
 	{ 0x0738, 0x4516, "Mad Catz Control Pad", 0, XTYPE_XBOX },
+	{ 0x0738, 0x4520, "Mad Catz Control Pad Pro", 0, XTYPE_XBOX },
 	{ 0x0738, 0x4522, "Mad Catz LumiCON", 0, XTYPE_XBOX },
 	{ 0x0738, 0x4526, "Mad Catz Control Pad Pro", 0, XTYPE_XBOX },
+	{ 0x0738, 0x4530, "Mad Catz Universal MC2 Racing Wheel and Pedals", 0, XTYPE_XBOX },
 	{ 0x0738, 0x4536, "Mad Catz MicroCON", 0, XTYPE_XBOX },
 	{ 0x0738, 0x4540, "Mad Catz Beat Pad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX },
 	{ 0x0738, 0x4556, "Mad Catz Lynx Wireless Controller", 0, XTYPE_XBOX },
+	{ 0x0738, 0x4586, "Mad Catz MicroCon Wireless Controller", 0, XTYPE_XBOX },
+	{ 0x0738, 0x4588, "Mad Catz Blaster", 0, XTYPE_XBOX },
+	{ 0x0738, 0x45ff, "Mad Catz Beat Pad (w/ Handle)", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX },
 	{ 0x0738, 0x4716, "Mad Catz Wired Xbox 360 Controller", 0, XTYPE_XBOX360 },
 	{ 0x0738, 0x4718, "Mad Catz Street Fighter IV FightStick SE", 0, XTYPE_XBOX360 },
 	{ 0x0738, 0x4726, "Mad Catz Xbox 360 Controller", 0, XTYPE_XBOX360 },
 	{ 0x0738, 0x4728, "Mad Catz Street Fighter IV FightPad", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
+	{ 0x0738, 0x4736, "Mad Catz MicroCon Gamepad", 0, XTYPE_XBOX360 },
 	{ 0x0738, 0x4738, "Mad Catz Wired Xbox 360 Controller (SFIV)", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
 	{ 0x0738, 0x4740, "Mad Catz Beat Pad", 0, XTYPE_XBOX360 },
+	{ 0x0738, 0x4743, "Mad Catz Beat Pad Pro", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX },
+	{ 0x0738, 0x4758, "Mad Catz Arcade Game Stick", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
+	{ 0x0738, 0x4a01, "Mad Catz FightStick TE 2", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOXONE },
 	{ 0x0738, 0x6040, "Mad Catz Beat Pad Pro", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX },
+	{ 0x0738, 0x9871, "Mad Catz Portable Drum", 0, XTYPE_XBOX360 },
 	{ 0x0738, 0xb726, "Mad Catz Xbox controller - MW2", 0, XTYPE_XBOX360 },
+	{ 0x0738, 0xb738, "Mad Catz MVC2TE Stick 2", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
 	{ 0x0738, 0xbeef, "Mad Catz JOYTECH NEO SE Advanced GamePad", XTYPE_XBOX360 },
 	{ 0x0738, 0xcb02, "Saitek Cyborg Rumble Pad - PC/Xbox 360", 0, XTYPE_XBOX360 },
 	{ 0x0738, 0xcb03, "Saitek P3200 Rumble Pad - PC/Xbox 360", 0, XTYPE_XBOX360 },
+	{ 0x0738, 0xcb29, "Saitek Aviator Stick AV8R02", 0, XTYPE_XBOX360 },
 	{ 0x0738, 0xf738, "Super SFIV FightStick TE S", 0, XTYPE_XBOX360 },
+	{ 0x07ff, 0xffff, "Mad Catz GamePad", 0, XTYPE_XBOX360 },
+	{ 0x0c12, 0x0005, "Intec wireless", 0, XTYPE_XBOX },
+	{ 0x0c12, 0x8801, "Nyko Xbox Controller", 0, XTYPE_XBOX },
 	{ 0x0c12, 0x8802, "Zeroplus Xbox Controller", 0, XTYPE_XBOX },
 	{ 0x0c12, 0x8809, "RedOctane Xbox Dance Pad", DANCEPAD_MAP_CONFIG, XTYPE_XBOX },
 	{ 0x0c12, 0x880a, "Pelican Eclipse PL-2023", 0, XTYPE_XBOX },
@@ -163,32 +206,66 @@ static const struct xpad_device {
 	{ 0x0c12, 0x9902, "HAMA VibraX - *FAULTY HARDWARE*", 0, XTYPE_XBOX },
 	{ 0x0d2f, 0x0002, "Andamiro Pump It Up pad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX },
 	{ 0x0e4c, 0x1097, "Radica Gamester Controller", 0, XTYPE_XBOX },
+	{ 0x0e4c, 0x1103, "Radica Gamester Reflex", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX },
 	{ 0x0e4c, 0x2390, "Radica Games Jtech Controller", 0, XTYPE_XBOX },
+	{ 0x0e4c, 0x3510, "Radica Gamester", 0, XTYPE_XBOX },
 	{ 0x0e6f, 0x0003, "Logic3 Freebird wireless Controller", 0, XTYPE_XBOX },
 	{ 0x0e6f, 0x0005, "Eclipse wireless Controller", 0, XTYPE_XBOX },
 	{ 0x0e6f, 0x0006, "Edge wireless Controller", 0, XTYPE_XBOX },
+	{ 0x0e6f, 0x0008, "After Glow Pro Controller", 0, XTYPE_XBOX },
 	{ 0x0e6f, 0x0105, "HSM3 Xbox360 dancepad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360 },
 	{ 0x0e6f, 0x0113, "Afterglow AX.1 Gamepad for Xbox 360", 0, XTYPE_XBOX360 },
+	{ 0x0e6f, 0x011f, "Rock Candy Gamepad Wired Controller", 0, XTYPE_XBOX360 },
+	{ 0x0e6f, 0x0131, "PDP EA Sports Controller", 0, XTYPE_XBOX360 },
+	{ 0x0e6f, 0x0133, "Xbox 360 Wired Controller", 0, XTYPE_XBOX360 },
+	{ 0x0e6f, 0x0139, "Afterglow Prismatic Wired Controller", 0, XTYPE_XBOXONE },
+	{ 0x0e6f, 0x013a, "PDP Xbox One Controller", 0, XTYPE_XBOXONE },
+	{ 0x0e6f, 0x0146, "Rock Candy Wired Controller for Xbox One", 0, XTYPE_XBOXONE },
+	{ 0x0e6f, 0x0147, "PDP Marvel Xbox One Controller", 0, XTYPE_XBOXONE },
+	{ 0x0e6f, 0x015c, "PDP Xbox One Arcade Stick", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOXONE },
+	{ 0x0e6f, 0x0161, "PDP Xbox One Controller", 0, XTYPE_XBOXONE },
+	{ 0x0e6f, 0x0162, "PDP Xbox One Controller", 0, XTYPE_XBOXONE },
+	{ 0x0e6f, 0x0163, "PDP Xbox One Controller", 0, XTYPE_XBOXONE },
+	{ 0x0e6f, 0x0164, "PDP Battlefield One", 0, XTYPE_XBOXONE },
+	{ 0x0e6f, 0x0165, "PDP Titanfall 2", 0, XTYPE_XBOXONE },
 	{ 0x0e6f, 0x0201, "Pelican PL-3601 'TSZ' Wired Xbox 360 Controller", 0, XTYPE_XBOX360 },
 	{ 0x0e6f, 0x0213, "Afterglow Gamepad for Xbox 360", 0, XTYPE_XBOX360 },
 	{ 0x0e6f, 0x021f, "Rock Candy Gamepad for Xbox 360", 0, XTYPE_XBOX360 },
+	{ 0x0e6f, 0x0246, "Rock Candy Gamepad for Xbox One 2015", 0, XTYPE_XBOXONE },
+	{ 0x0e6f, 0x02ab, "PDP Controller for Xbox One", 0, XTYPE_XBOXONE },
+	{ 0x0e6f, 0x02a4, "PDP Wired Controller for Xbox One - Stealth Series", 0, XTYPE_XBOXONE },
+	{ 0x0e6f, 0x02a6, "PDP Wired Controller for Xbox One - Camo Series", 0, XTYPE_XBOXONE },
 	{ 0x0e6f, 0x0301, "Logic3 Controller", 0, XTYPE_XBOX360 },
+	{ 0x0e6f, 0x0346, "Rock Candy Gamepad for Xbox One 2016", 0, XTYPE_XBOXONE },
 	{ 0x0e6f, 0x0401, "Logic3 Controller", 0, XTYPE_XBOX360 },
+	{ 0x0e6f, 0x0413, "Afterglow AX.1 Gamepad for Xbox 360", 0, XTYPE_XBOX360 },
+	{ 0x0e6f, 0x0501, "PDP Xbox 360 Controller", 0, XTYPE_XBOX360 },
+	{ 0x0e6f, 0xf900, "PDP Afterglow AX.1", 0, XTYPE_XBOX360 },
 	{ 0x0e8f, 0x0201, "SmartJoy Frag Xpad/PS2 adaptor", 0, XTYPE_XBOX },
 	{ 0x0e8f, 0x3008, "Generic xbox control (dealextreme)", 0, XTYPE_XBOX },
 	{ 0x0f0d, 0x000a, "Hori Co. DOA4 FightStick", 0, XTYPE_XBOX360 },
+	{ 0x0f0d, 0x000c, "Hori PadEX Turbo", 0, XTYPE_XBOX360 },
 	{ 0x0f0d, 0x000d, "Hori Fighting Stick EX2", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
 	{ 0x0f0d, 0x0016, "Hori Real Arcade Pro.EX", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
+	{ 0x0f0d, 0x001b, "Hori Real Arcade Pro VX", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
+	{ 0x0f0d, 0x0063, "Hori Real Arcade Pro Hayabusa (USA) Xbox One", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOXONE },
+	{ 0x0f0d, 0x0067, "HORIPAD ONE", 0, XTYPE_XBOXONE },
+	{ 0x0f0d, 0x0078, "Hori Real Arcade Pro V Kai Xbox One", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOXONE },
+	{ 0x0f30, 0x010b, "Philips Recoil", 0, XTYPE_XBOX },
 	{ 0x0f30, 0x0202, "Joytech Advanced Controller", 0, XTYPE_XBOX },
 	{ 0x0f30, 0x8888, "BigBen XBMiniPad Controller", 0, XTYPE_XBOX },
 	{ 0x102c, 0xff0c, "Joytech Wireless Advanced Controller", 0, XTYPE_XBOX },
+	{ 0x11c9, 0x55f0, "Nacon GC-100XF", 0, XTYPE_XBOX360 },
 	{ 0x12ab, 0x0004, "Honey Bee Xbox360 dancepad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360 },
 	{ 0x12ab, 0x0301, "PDP AFTERGLOW AX.1", 0, XTYPE_XBOX360 },
+	{ 0x12ab, 0x0303, "Mortal Kombat Klassic FightStick", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
 	{ 0x12ab, 0x8809, "Xbox DDR dancepad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX },
 	{ 0x1430, 0x4748, "RedOctane Guitar Hero X-plorer", 0, XTYPE_XBOX360 },
 	{ 0x1430, 0x8888, "TX6500+ Dance Pad (first generation)", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX },
+	{ 0x1430, 0xf801, "RedOctane Controller", 0, XTYPE_XBOX360 },
 	{ 0x146b, 0x0601, "BigBen Interactive XBOX 360 Controller", 0, XTYPE_XBOX360 },
 	{ 0x1532, 0x0037, "Razer Sabertooth", 0, XTYPE_XBOX360 },
+	{ 0x1532, 0x0a00, "Razer Atrox Arcade Stick", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOXONE },
 	{ 0x1532, 0x0a03, "Razer Wildcat", 0, XTYPE_XBOXONE },
 	{ 0x15e4, 0x3f00, "Power A Mini Pro Elite", 0, XTYPE_XBOX360 },
 	{ 0x15e4, 0x3f0a, "Xbox Airflo wired controller", 0, XTYPE_XBOX360 },
@@ -196,24 +273,67 @@ static const struct xpad_device {
 	{ 0x162e, 0xbeef, "Joytech Neo-Se Take2", 0, XTYPE_XBOX360 },
 	{ 0x1689, 0xfd00, "Razer Onza Tournament Edition", 0, XTYPE_XBOX360 },
 	{ 0x1689, 0xfd01, "Razer Onza Classic Edition", 0, XTYPE_XBOX360 },
-	{ 0x24c6, 0x5d04, "Razer Sabertooth", 0, XTYPE_XBOX360 },
+	{ 0x1689, 0xfe00, "Razer Sabertooth", 0, XTYPE_XBOX360 },
 	{ 0x1bad, 0x0002, "Harmonix Rock Band Guitar", 0, XTYPE_XBOX360 },
 	{ 0x1bad, 0x0003, "Harmonix Rock Band Drumkit", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360 },
+	{ 0x1bad, 0x0130, "Ion Drum Rocker", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360 },
 	{ 0x1bad, 0xf016, "Mad Catz Xbox 360 Controller", 0, XTYPE_XBOX360 },
+	{ 0x1bad, 0xf018, "Mad Catz Street Fighter IV SE Fighting Stick", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
+	{ 0x1bad, 0xf019, "Mad Catz Brawlstick for Xbox 360", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
+	{ 0x1bad, 0xf021, "Mad Cats Ghost Recon FS GamePad", 0, XTYPE_XBOX360 },
 	{ 0x1bad, 0xf023, "MLG Pro Circuit Controller (Xbox)", 0, XTYPE_XBOX360 },
+	{ 0x1bad, 0xf025, "Mad Catz Call Of Duty", 0, XTYPE_XBOX360 },
+	{ 0x1bad, 0xf027, "Mad Catz FPS Pro", 0, XTYPE_XBOX360 },
 	{ 0x1bad, 0xf028, "Street Fighter IV FightPad", 0, XTYPE_XBOX360 },
+	{ 0x1bad, 0xf02e, "Mad Catz Fightpad", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
+	{ 0x1bad, 0xf030, "Mad Catz Xbox 360 MC2 MicroCon Racing Wheel", 0, XTYPE_XBOX360 },
+	{ 0x1bad, 0xf036, "Mad Catz MicroCon GamePad Pro", 0, XTYPE_XBOX360 },
 	{ 0x1bad, 0xf038, "Street Fighter IV FightStick TE", 0, XTYPE_XBOX360 },
+	{ 0x1bad, 0xf039, "Mad Catz MvC2 TE", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
+	{ 0x1bad, 0xf03a, "Mad Catz SFxT Fightstick Pro", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
+	{ 0x1bad, 0xf03d, "Street Fighter IV Arcade Stick TE - Chun Li", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
+	{ 0x1bad, 0xf03e, "Mad Catz MLG FightStick TE", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
+	{ 0x1bad, 0xf03f, "Mad Catz FightStick SoulCaliber", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
+	{ 0x1bad, 0xf042, "Mad Catz FightStick TES+", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
+	{ 0x1bad, 0xf080, "Mad Catz FightStick TE2", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
+	{ 0x1bad, 0xf501, "HoriPad EX2 Turbo", 0, XTYPE_XBOX360 },
+	{ 0x1bad, 0xf502, "Hori Real Arcade Pro.VX SA", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
+	{ 0x1bad, 0xf503, "Hori Fighting Stick VX", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
+	{ 0x1bad, 0xf504, "Hori Real Arcade Pro. EX", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
+	{ 0x1bad, 0xf505, "Hori Fighting Stick EX2B", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
+	{ 0x1bad, 0xf506, "Hori Real Arcade Pro.EX Premium VLX", 0, XTYPE_XBOX360 },
 	{ 0x1bad, 0xf900, "Harmonix Xbox 360 Controller", 0, XTYPE_XBOX360 },
 	{ 0x1bad, 0xf901, "Gamestop Xbox 360 Controller", 0, XTYPE_XBOX360 },
 	{ 0x1bad, 0xf903, "Tron Xbox 360 controller", 0, XTYPE_XBOX360 },
+	{ 0x1bad, 0xf904, "PDP Versus Fighting Pad", 0, XTYPE_XBOX360 },
+	{ 0x1bad, 0xf906, "MortalKombat FightStick", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
+	{ 0x1bad, 0xfa01, "MadCatz GamePad", 0, XTYPE_XBOX360 },
+	{ 0x1bad, 0xfd00, "Razer Onza TE", 0, XTYPE_XBOX360 },
+	{ 0x1bad, 0xfd01, "Razer Onza", 0, XTYPE_XBOX360 },
 	{ 0x24c6, 0x5000, "Razer Atrox Arcade Stick", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
 	{ 0x24c6, 0x5300, "PowerA MINI PROEX Controller", 0, XTYPE_XBOX360 },
 	{ 0x24c6, 0x5303, "Xbox Airflo wired controller", 0, XTYPE_XBOX360 },
+	{ 0x24c6, 0x530a, "Xbox 360 Pro EX Controller", 0, XTYPE_XBOX360 },
+	{ 0x24c6, 0x531a, "PowerA Pro Ex", 0, XTYPE_XBOX360 },
+	{ 0x24c6, 0x5397, "FUS1ON Tournament Controller", 0, XTYPE_XBOX360 },
+	{ 0x24c6, 0x541a, "PowerA Xbox One Mini Wired Controller", 0, XTYPE_XBOXONE },
+	{ 0x24c6, 0x542a, "Xbox ONE spectra", 0, XTYPE_XBOXONE },
+	{ 0x24c6, 0x543a, "PowerA Xbox One wired controller", 0, XTYPE_XBOXONE },
 	{ 0x24c6, 0x5500, "Hori XBOX 360 EX 2 with Turbo", 0, XTYPE_XBOX360 },
 	{ 0x24c6, 0x5501, "Hori Real Arcade Pro VX-SA", 0, XTYPE_XBOX360 },
+	{ 0x24c6, 0x5502, "Hori Fighting Stick VX Alt", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
+	{ 0x24c6, 0x5503, "Hori Fighting Edge", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
 	{ 0x24c6, 0x5506, "Hori SOULCALIBUR V Stick", 0, XTYPE_XBOX360 },
+	{ 0x24c6, 0x550d, "Hori GEM Xbox controller", 0, XTYPE_XBOX360 },
+	{ 0x24c6, 0x550e, "Hori Real Arcade Pro V Kai 360", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
+	{ 0x24c6, 0x551a, "PowerA FUSION Pro Controller", 0, XTYPE_XBOXONE },
+	{ 0x24c6, 0x561a, "PowerA FUSION Controller", 0, XTYPE_XBOXONE },
+	{ 0x24c6, 0x5b00, "ThrustMaster Ferrari 458 Racing Wheel", 0, XTYPE_XBOX360 },
 	{ 0x24c6, 0x5b02, "Thrustmaster, Inc. GPX Controller", 0, XTYPE_XBOX360 },
 	{ 0x24c6, 0x5b03, "Thrustmaster Ferrari 458 Racing Wheel", 0, XTYPE_XBOX360 },
+	{ 0x24c6, 0x5d04, "Razer Sabertooth", 0, XTYPE_XBOX360 },
+	{ 0x24c6, 0xfafe, "Rock Candy Gamepad for Xbox 360", 0, XTYPE_XBOX360 },
+	{ 0x3767, 0x0101, "Fanatec Speedster 3 Forceshock Wheel", 0, XTYPE_XBOX },
 	{ 0xffff, 0xffff, "Chinese-made Xbox Controller", 0, XTYPE_XBOX },
 	{ 0x0000, 0x0000, "Generic X-Box pad", 0, XTYPE_UNKNOWN }
 };
@@ -274,15 +394,15 @@ static const signed short xpad_abs_triggers[] = {
  * match against vendor id as well. Wired Xbox 360 devices have protocol 1,
  * wireless controllers have protocol 129.
  */
-#define XPAD_XBOX360_VENDOR_PROTOCOL(vend,pr) \
+#define XPAD_XBOX360_VENDOR_PROTOCOL(vend, pr) \
 	.match_flags = USB_DEVICE_ID_MATCH_VENDOR | USB_DEVICE_ID_MATCH_INT_INFO, \
 	.idVendor = (vend), \
 	.bInterfaceClass = USB_CLASS_VENDOR_SPEC, \
 	.bInterfaceSubClass = 93, \
 	.bInterfaceProtocol = (pr)
 #define XPAD_XBOX360_VENDOR(vend) \
-	{ XPAD_XBOX360_VENDOR_PROTOCOL(vend,1) }, \
-	{ XPAD_XBOX360_VENDOR_PROTOCOL(vend,129) }
+	{ XPAD_XBOX360_VENDOR_PROTOCOL((vend), 1) }, \
+	{ XPAD_XBOX360_VENDOR_PROTOCOL((vend), 129) }
 
 /* The Xbox One controller uses subclass 71 and protocol 208. */
 #define XPAD_XBOXONE_VENDOR_PROTOCOL(vend, pr) \
@@ -292,33 +412,138 @@ static const signed short xpad_abs_triggers[] = {
 	.bInterfaceSubClass = 71, \
 	.bInterfaceProtocol = (pr)
 #define XPAD_XBOXONE_VENDOR(vend) \
-	{ XPAD_XBOXONE_VENDOR_PROTOCOL(vend, 208) }
+	{ XPAD_XBOXONE_VENDOR_PROTOCOL((vend), 208) }
 
-static struct usb_device_id xpad_table[] = {
+static const struct usb_device_id xpad_table[] = {
 	{ USB_INTERFACE_INFO('X', 'B', 0) },	/* X-Box USB-IF not approved class */
+	XPAD_XBOX360_VENDOR(0x0079),		/* GPD Win 2 Controller */
 	XPAD_XBOX360_VENDOR(0x044f),		/* Thrustmaster X-Box 360 controllers */
 	XPAD_XBOX360_VENDOR(0x045e),		/* Microsoft X-Box 360 controllers */
 	XPAD_XBOXONE_VENDOR(0x045e),		/* Microsoft X-Box One controllers */
 	XPAD_XBOX360_VENDOR(0x046d),		/* Logitech X-Box 360 style controllers */
+	XPAD_XBOX360_VENDOR(0x056e),		/* Elecom JC-U3613M */
+	XPAD_XBOX360_VENDOR(0x06a3),		/* Saitek P3600 */
 	XPAD_XBOX360_VENDOR(0x0738),		/* Mad Catz X-Box 360 controllers */
 	{ USB_DEVICE(0x0738, 0x4540) },		/* Mad Catz Beat Pad */
+	XPAD_XBOXONE_VENDOR(0x0738),		/* Mad Catz FightStick TE 2 */
+	XPAD_XBOX360_VENDOR(0x07ff),		/* Mad Catz GamePad */
 	XPAD_XBOX360_VENDOR(0x0e6f),		/* 0x0e6f X-Box 360 controllers */
+	XPAD_XBOXONE_VENDOR(0x0e6f),		/* 0x0e6f X-Box One controllers */
+	XPAD_XBOX360_VENDOR(0x0f0d),		/* Hori Controllers */
+	XPAD_XBOXONE_VENDOR(0x0f0d),		/* Hori Controllers */
+	XPAD_XBOX360_VENDOR(0x11c9),		/* Nacon GC100XF */
 	XPAD_XBOX360_VENDOR(0x12ab),		/* X-Box 360 dance pads */
 	XPAD_XBOX360_VENDOR(0x1430),		/* RedOctane X-Box 360 controllers */
 	XPAD_XBOX360_VENDOR(0x146b),		/* BigBen Interactive Controllers */
-	XPAD_XBOX360_VENDOR(0x1bad),		/* Harminix Rock Band Guitar and Drums */
-	XPAD_XBOX360_VENDOR(0x0f0d),		/* Hori Controllers */
-	XPAD_XBOX360_VENDOR(0x1689),		/* Razer Onza */
-	XPAD_XBOX360_VENDOR(0x24c6),		/* PowerA Controllers */
 	XPAD_XBOX360_VENDOR(0x1532),		/* Razer Sabertooth */
 	XPAD_XBOXONE_VENDOR(0x1532),		/* Razer Wildcat */
 	XPAD_XBOX360_VENDOR(0x15e4),		/* Numark X-Box 360 controllers */
 	XPAD_XBOX360_VENDOR(0x162e),		/* Joytech X-Box 360 controllers */
+	XPAD_XBOX360_VENDOR(0x1689),		/* Razer Onza */
+	XPAD_XBOX360_VENDOR(0x1bad),		/* Harminix Rock Band Guitar and Drums */
+	XPAD_XBOX360_VENDOR(0x24c6),		/* PowerA Controllers */
+	XPAD_XBOXONE_VENDOR(0x24c6),		/* PowerA Controllers */
 	{ }
 };
 
 MODULE_DEVICE_TABLE(usb, xpad_table);
 
+struct xboxone_init_packet {
+	u16 idVendor;
+	u16 idProduct;
+	const u8 *data;
+	u8 len;
+};
+
+#define XBOXONE_INIT_PKT(_vid, _pid, _data)		\
+	{						\
+		.idVendor	= (_vid),		\
+		.idProduct	= (_pid),		\
+		.data		= (_data),		\
+		.len		= ARRAY_SIZE(_data),	\
+	}
+
+
+/*
+ * This packet is required for all Xbox One pads with 2015
+ * or later firmware installed (or present from the factory).
+ */
+static const u8 xboxone_fw2015_init[] = {
+	0x05, 0x20, 0x00, 0x01, 0x00
+};
+
+/*
+ * This packet is required for the Titanfall 2 Xbox One pads
+ * (0x0e6f:0x0165) to finish initialization and for Hori pads
+ * (0x0f0d:0x0067) to make the analog sticks work.
+ */
+static const u8 xboxone_hori_init[] = {
+	0x01, 0x20, 0x00, 0x09, 0x00, 0x04, 0x20, 0x3a,
+	0x00, 0x00, 0x00, 0x80, 0x00
+};
+
+/*
+ * This packet is required for some of the PDP pads to start
+ * sending input reports. These pads include: (0x0e6f:0x02ab),
+ * (0x0e6f:0x02a4).
+ */
+static const u8 xboxone_pdp_init1[] = {
+	0x0a, 0x20, 0x00, 0x03, 0x00, 0x01, 0x14
+};
+
+/*
+ * This packet is required for some of the PDP pads to start
+ * sending input reports. These pads include: (0x0e6f:0x02ab),
+ * (0x0e6f:0x02a4).
+ */
+static const u8 xboxone_pdp_init2[] = {
+	0x06, 0x20, 0x00, 0x02, 0x01, 0x00
+};
+
+/*
+ * A specific rumble packet is required for some PowerA pads to start
+ * sending input reports. One of those pads is (0x24c6:0x543a).
+ */
+static const u8 xboxone_rumblebegin_init[] = {
+	0x09, 0x00, 0x00, 0x09, 0x00, 0x0F, 0x00, 0x00,
+	0x1D, 0x1D, 0xFF, 0x00, 0x00
+};
+
+/*
+ * A rumble packet with zero FF intensity will immediately
+ * terminate the rumbling required to init PowerA pads.
+ * This should happen fast enough that the motors don't
+ * spin up to enough speed to actually vibrate the gamepad.
+ */
+static const u8 xboxone_rumbleend_init[] = {
+	0x09, 0x00, 0x00, 0x09, 0x00, 0x0F, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00
+};
+
+/*
+ * This specifies the selection of init packets that a gamepad
+ * will be sent on init *and* the order in which they will be
+ * sent. The correct sequence number will be added when the
+ * packet is going to be sent.
+ */
+static const struct xboxone_init_packet xboxone_init_packets[] = {
+	XBOXONE_INIT_PKT(0x0e6f, 0x0165, xboxone_hori_init),
+	XBOXONE_INIT_PKT(0x0f0d, 0x0067, xboxone_hori_init),
+	XBOXONE_INIT_PKT(0x0000, 0x0000, xboxone_fw2015_init),
+	XBOXONE_INIT_PKT(0x0e6f, 0x02ab, xboxone_pdp_init1),
+	XBOXONE_INIT_PKT(0x0e6f, 0x02ab, xboxone_pdp_init2),
+	XBOXONE_INIT_PKT(0x0e6f, 0x02a4, xboxone_pdp_init1),
+	XBOXONE_INIT_PKT(0x0e6f, 0x02a4, xboxone_pdp_init2),
+	XBOXONE_INIT_PKT(0x0e6f, 0x02a6, xboxone_pdp_init1),
+	XBOXONE_INIT_PKT(0x0e6f, 0x02a6, xboxone_pdp_init2),
+	XBOXONE_INIT_PKT(0x24c6, 0x541a, xboxone_rumblebegin_init),
+	XBOXONE_INIT_PKT(0x24c6, 0x542a, xboxone_rumblebegin_init),
+	XBOXONE_INIT_PKT(0x24c6, 0x543a, xboxone_rumblebegin_init),
+	XBOXONE_INIT_PKT(0x24c6, 0x541a, xboxone_rumbleend_init),
+	XBOXONE_INIT_PKT(0x24c6, 0x542a, xboxone_rumbleend_init),
+	XBOXONE_INIT_PKT(0x24c6, 0x543a, xboxone_rumbleend_init),
+};
+
 struct xpad_output_packet {
 	u8 data[XPAD_PKT_LEN];
 	u8 len;
@@ -334,23 +559,28 @@ struct xpad_output_packet {
 
 struct usb_xpad {
 	struct input_dev *dev;		/* input device interface */
+	struct input_dev __rcu *x360w_dev;
 	struct usb_device *udev;	/* usb device */
 	struct usb_interface *intf;	/* usb interface */
 
-	int pad_present;
+	bool pad_present;
+	bool input_created;
 
 	struct urb *irq_in;		/* urb for interrupt in report */
 	unsigned char *idata;		/* input data */
 	dma_addr_t idata_dma;
 
 	struct urb *irq_out;		/* urb for interrupt out report */
+	struct usb_anchor irq_out_anchor;
 	bool irq_out_active;		/* we must not use an active URB */
+	u8 odata_serial;		/* serial number for xbox one protocol */
 	unsigned char *odata;		/* output data */
 	dma_addr_t odata_dma;
 	spinlock_t odata_lock;
 
 	struct xpad_output_packet out_packets[XPAD_NUM_OUT_PACKETS];
 	int last_out_packet;
+	int init_seq;
 
 #if defined(CONFIG_JOYSTICK_XPAD_LEDS)
 	struct xpad_led *led;
@@ -362,8 +592,13 @@ struct usb_xpad {
 	int xtype;			/* type of xbox device */
 	int pad_nr;			/* the order x360 pads were attached */
 	const char *name;		/* name of the device */
+	struct work_struct work;	/* init/remove device from callback */
 };
 
+static int xpad_init_input(struct usb_xpad *xpad);
+static void xpad_deinit_input(struct usb_xpad *xpad);
+static void xpadone_ack_mode_report(struct usb_xpad *xpad, u8 seq_num);
+
 /*
  *	xpad_process_packet
  *
@@ -443,10 +678,12 @@ static void xpad_process_packet(struct usb_xpad *xpad, u16 cmd, unsigned char *d
  *		http://www.free60.org/wiki/Gamepad
  */
 
-static void xpad360_process_packet(struct usb_xpad *xpad,
+static void xpad360_process_packet(struct usb_xpad *xpad, struct input_dev *dev,
 				   u16 cmd, unsigned char *data)
 {
-	struct input_dev *dev = xpad->dev;
+	/* valid pad data */
+	if (data[0] != 0x00)
+		return;
 
 	/* digital pad */
 	if (xpad->mapping & MAP_DPAD_TO_BUTTONS) {
@@ -514,7 +751,30 @@ static void xpad360_process_packet(struct usb_xpad *xpad,
 	input_sync(dev);
 }
 
-static void xpad_identify_controller(struct usb_xpad *xpad);
+static void xpad_presence_work(struct work_struct *work)
+{
+	struct usb_xpad *xpad = container_of(work, struct usb_xpad, work);
+	int error;
+
+	if (xpad->pad_present) {
+		error = xpad_init_input(xpad);
+		if (error) {
+			/* complain only, not much else we can do here */
+			dev_err(&xpad->dev->dev,
+				"unable to init device: %d\n", error);
+		} else {
+			rcu_assign_pointer(xpad->x360w_dev, xpad->dev);
+		}
+	} else {
+		RCU_INIT_POINTER(xpad->x360w_dev, NULL);
+		synchronize_rcu();
+		/*
+		 * Now that we are sure xpad360w_process_packet is not
+		 * using input device we can get rid of it.
+		 */
+		xpad_deinit_input(xpad);
+	}
+}
 
 /*
  * xpad360w_process_packet
@@ -532,35 +792,61 @@ static void xpad_identify_controller(struct usb_xpad *xpad);
  */
 static void xpad360w_process_packet(struct usb_xpad *xpad, u16 cmd, unsigned char *data)
 {
+	struct input_dev *dev;
+	bool present;
+
 	/* Presence change */
 	if (data[0] & 0x08) {
-		if (data[1] & 0x80) {
-			xpad->pad_present = 1;
-			/*
-			 * Light up the segment corresponding to
-			 * controller number.
-			 */
-			xpad_identify_controller(xpad);
-		} else
-			xpad->pad_present = 0;
+		present = (data[1] & 0x80) != 0;
+
+		if (xpad->pad_present != present) {
+			xpad->pad_present = present;
+			schedule_work(&xpad->work);
+		}
 	}
 
 	/* Valid pad data */
-	if (!(data[1] & 0x1))
+	if (data[1] != 0x1)
 		return;
 
-	xpad360_process_packet(xpad, cmd, &data[4]);
+	rcu_read_lock();
+	dev = rcu_dereference(xpad->x360w_dev);
+	if (dev)
+		xpad360_process_packet(xpad, dev, cmd, &data[4]);
+	rcu_read_unlock();
 }
 
 /*
- *	xpadone_process_buttons
+ *	xpadone_process_packet
  *
- *	Process a button update packet from an Xbox one controller.
+ *	Completes a request by converting the data into events for the
+ *	input subsystem. This version is for the Xbox One controller.
+ *
+ *	The report format was gleaned from
+ *	https://github.com/kylelemons/xbox/blob/master/xbox.go
  */
-static void xpadone_process_buttons(struct usb_xpad *xpad,
-				struct input_dev *dev,
-				unsigned char *data)
+static void xpadone_process_packet(struct usb_xpad *xpad, u16 cmd, unsigned char *data)
 {
+	struct input_dev *dev = xpad->dev;
+
+	/* the xbox button has its own special report */
+	if (data[0] == 0X07) {
+		/*
+		 * The Xbox One S controller requires these reports to be
+		 * acked otherwise it continues sending them forever and
+		 * won't report further mode button events.
+		 */
+		if (data[1] == 0x30)
+			xpadone_ack_mode_report(xpad, data[2]);
+
+		input_report_key(dev, BTN_MODE, data[4] & 0x01);
+		input_sync(dev);
+		return;
+	}
+	/* check invalid packet */
+	else if (data[0] != 0X20)
+		return;
+
 	/* menu/view buttons */
 	input_report_key(dev, BTN_START,  data[4] & 0x04);
 	input_report_key(dev, BTN_SELECT, data[4] & 0x08);
@@ -623,34 +909,6 @@ static void xpadone_process_buttons(struct usb_xpad *xpad,
 	input_sync(dev);
 }
 
-/*
- *	xpadone_process_packet
- *
- *	Completes a request by converting the data into events for the
- *	input subsystem. This version is for the Xbox One controller.
- *
- *	The report format was gleaned from
- *	https://github.com/kylelemons/xbox/blob/master/xbox.go
- */
-
-static void xpadone_process_packet(struct usb_xpad *xpad,
-				u16 cmd, unsigned char *data)
-{
-	struct input_dev *dev = xpad->dev;
-
-	switch (data[0]) {
-	case 0x20:
-		xpadone_process_buttons(xpad, dev, data);
-		break;
-
-	case 0x07:
-		/* the xbox button has its own special report */
-		input_report_key(dev, BTN_MODE, data[4] & 0x01);
-		input_sync(dev);
-		break;
-	}
-}
-
 static void xpad_irq_in(struct urb *urb)
 {
 	struct usb_xpad *xpad = urb->context;
@@ -678,7 +936,7 @@ static void xpad_irq_in(struct urb *urb)
 
 	switch (xpad->xtype) {
 	case XTYPE_XBOX360:
-		xpad360_process_packet(xpad, 0, xpad->idata);
+		xpad360_process_packet(xpad, xpad->dev, 0, xpad->idata);
 		break;
 	case XTYPE_XBOX360W:
 		xpad360w_process_packet(xpad, 0, xpad->idata);
@@ -697,12 +955,48 @@ exit:
 			__func__, retval);
 }
 
+/* Callers must hold xpad->odata_lock spinlock */
+static bool xpad_prepare_next_init_packet(struct usb_xpad *xpad)
+{
+	const struct xboxone_init_packet *init_packet;
+
+	if (xpad->xtype != XTYPE_XBOXONE)
+		return false;
+
+	/* Perform initialization sequence for Xbox One pads that require it */
+	while (xpad->init_seq < ARRAY_SIZE(xboxone_init_packets)) {
+		init_packet = &xboxone_init_packets[xpad->init_seq++];
+
+		if (init_packet->idVendor != 0 &&
+		    init_packet->idVendor != xpad->dev->id.vendor)
+			continue;
+
+		if (init_packet->idProduct != 0 &&
+		    init_packet->idProduct != xpad->dev->id.product)
+			continue;
+
+		/* This packet applies to our device, so prepare to send it */
+		memcpy(xpad->odata, init_packet->data, init_packet->len);
+		xpad->irq_out->transfer_buffer_length = init_packet->len;
+
+		/* Update packet with current sequence number */
+		xpad->odata[2] = xpad->odata_serial++;
+		return true;
+	}
+
+	return false;
+}
+
 /* Callers must hold xpad->odata_lock spinlock */
 static bool xpad_prepare_next_out_packet(struct usb_xpad *xpad)
 {
 	struct xpad_output_packet *pkt, *packet = NULL;
 	int i;
 
+	/* We may have init packets to send before we can send user commands */
+	if (xpad_prepare_next_init_packet(xpad))
+		return true;
+
 	for (i = 0; i < XPAD_NUM_OUT_PACKETS; i++) {
 		if (++xpad->last_out_packet >= XPAD_NUM_OUT_PACKETS)
 			xpad->last_out_packet = 0;
@@ -733,11 +1027,13 @@ static int xpad_try_sending_next_out_packet(struct usb_xpad *xpad)
 	int error;
 
 	if (!xpad->irq_out_active && xpad_prepare_next_out_packet(xpad)) {
+		usb_anchor_urb(xpad->irq_out, &xpad->irq_out_anchor);
 		error = usb_submit_urb(xpad->irq_out, GFP_ATOMIC);
 		if (error) {
 			dev_err(&xpad->intf->dev,
 				"%s - usb_submit_urb failed with result %d\n",
 				__func__, error);
+			usb_unanchor_urb(xpad->irq_out);
 			return -EIO;
 		}
 
@@ -779,11 +1075,13 @@ static void xpad_irq_out(struct urb *urb)
 	}
 
 	if (xpad->irq_out_active) {
+		usb_anchor_urb(urb, &xpad->irq_out_anchor);
 		error = usb_submit_urb(urb, GFP_ATOMIC);
 		if (error) {
 			dev_err(dev,
 				"%s - usb_submit_urb failed with result %d\n",
 				__func__, error);
+			usb_unanchor_urb(urb);
 			xpad->irq_out_active = false;
 		}
 	}
@@ -791,34 +1089,29 @@ static void xpad_irq_out(struct urb *urb)
 	spin_unlock_irqrestore(&xpad->odata_lock, flags);
 }
 
-static int xpad_init_output(struct usb_interface *intf, struct usb_xpad *xpad)
+static int xpad_init_output(struct usb_interface *intf, struct usb_xpad *xpad,
+			struct usb_endpoint_descriptor *ep_irq_out)
 {
-	struct usb_endpoint_descriptor *ep_irq_out;
-	int ep_irq_out_idx;
 	int error;
 
 	if (xpad->xtype == XTYPE_UNKNOWN)
 		return 0;
 
+	init_usb_anchor(&xpad->irq_out_anchor);
+
 	xpad->odata = usb_alloc_coherent(xpad->udev, XPAD_PKT_LEN,
 					 GFP_KERNEL, &xpad->odata_dma);
-	if (!xpad->odata) {
-		error = -ENOMEM;
-		goto fail1;
-	}
+	if (!xpad->odata)
+		return -ENOMEM;
 
 	spin_lock_init(&xpad->odata_lock);
 
 	xpad->irq_out = usb_alloc_urb(0, GFP_KERNEL);
 	if (!xpad->irq_out) {
 		error = -ENOMEM;
-		goto fail2;
+		goto err_free_coherent;
 	}
 
-	/* Xbox One controller has in/out endpoints swapped. */
-	ep_irq_out_idx = xpad->xtype == XTYPE_XBOXONE ? 0 : 1;
-	ep_irq_out = &intf->cur_altsetting->endpoint[ep_irq_out_idx].desc;
-
 	usb_fill_int_urb(xpad->irq_out, xpad->udev,
 			 usb_sndintpipe(xpad->udev, ep_irq_out->bEndpointAddress),
 			 xpad->odata, XPAD_PKT_LEN,
@@ -828,14 +1121,21 @@ static int xpad_init_output(struct usb_interface *intf, struct usb_xpad *xpad)
 
 	return 0;
 
- fail2:	usb_free_coherent(xpad->udev, XPAD_PKT_LEN, xpad->odata, xpad->odata_dma);
- fail1:	return error;
+err_free_coherent:
+	usb_free_coherent(xpad->udev, XPAD_PKT_LEN, xpad->odata, xpad->odata_dma);
+	return error;
 }
 
 static void xpad_stop_output(struct usb_xpad *xpad)
 {
-	if (xpad->xtype != XTYPE_UNKNOWN)
-		usb_kill_urb(xpad->irq_out);
+	if (xpad->xtype != XTYPE_UNKNOWN) {
+		if (!usb_wait_anchor_empty_timeout(&xpad->irq_out_anchor,
+						   5000)) {
+			dev_warn(&xpad->intf->dev,
+				 "timed out waiting for output URB to complete, killing\n");
+			usb_kill_anchored_urbs(&xpad->irq_out_anchor);
+		}
+	}
 }
 
 static void xpad_deinit_output(struct usb_xpad *xpad)
@@ -882,21 +1182,17 @@ static int xpad_inquiry_pad_presence(struct usb_xpad *xpad)
 
 static int xpad_start_xbox_one(struct usb_xpad *xpad)
 {
-	struct xpad_output_packet *packet =
-			&xpad->out_packets[XPAD_OUT_CMD_IDX];
 	unsigned long flags;
 	int retval;
 
 	spin_lock_irqsave(&xpad->odata_lock, flags);
 
-	/* Xbox one controller needs to be initialized. */
-	packet->data[0] = 0x05;
-	packet->data[1] = 0x20;
-	packet->len = 2;
-	packet->pending = true;
-
-	/* Reset the sequence so we send out start packet first */
-	xpad->last_out_packet = -1;
+	/*
+	 * Begin the init sequence by attempting to send a packet.
+	 * We will cycle through the init packet sequence before
+	 * sending any packets from the output ring.
+	 */
+	xpad->init_seq = 0;
 	retval = xpad_try_sending_next_out_packet(xpad);
 
 	spin_unlock_irqrestore(&xpad->odata_lock, flags);
@@ -904,6 +1200,30 @@ static int xpad_start_xbox_one(struct usb_xpad *xpad)
 	return retval;
 }
 
+static void xpadone_ack_mode_report(struct usb_xpad *xpad, u8 seq_num)
+{
+	unsigned long flags;
+	struct xpad_output_packet *packet =
+			&xpad->out_packets[XPAD_OUT_CMD_IDX];
+	static const u8 mode_report_ack[] = {
+		0x01, 0x20, 0x00, 0x09, 0x00, 0x07, 0x20, 0x02,
+		0x00, 0x00, 0x00, 0x00, 0x00
+	};
+
+	spin_lock_irqsave(&xpad->odata_lock, flags);
+
+	packet->len = sizeof(mode_report_ack);
+	memcpy(packet->data, mode_report_ack, packet->len);
+	packet->data[2] = seq_num;
+	packet->pending = true;
+
+	/* Reset the sequence so we send out the ack now */
+	xpad->last_out_packet = -1;
+	xpad_try_sending_next_out_packet(xpad);
+
+	spin_unlock_irqrestore(&xpad->odata_lock, flags);
+}
+
 #ifdef CONFIG_JOYSTICK_XPAD_FF
 static int xpad_play_effect(struct input_dev *dev, void *data, struct ff_effect *effect)
 {
@@ -966,18 +1286,19 @@ static int xpad_play_effect(struct input_dev *dev, void *data, struct ff_effect
 
 	case XTYPE_XBOXONE:
 		packet->data[0] = 0x09; /* activate rumble */
-		packet->data[1] = 0x08;
-		packet->data[2] = 0x00;
-		packet->data[3] = 0x08; /* continuous effect */
-		packet->data[4] = 0x00; /* simple rumble mode */
-		packet->data[5] = 0x03; /* L and R actuator only */
-		packet->data[6] = 0x00; /* TODO: LT actuator */
-		packet->data[7] = 0x00; /* TODO: RT actuator */
-		packet->data[8] = strong / 256;	/* left actuator */
-		packet->data[9] = weak / 256;	/* right actuator */
-		packet->data[10] = 0x80;	/* length of pulse */
-		packet->data[11] = 0x00;	/* stop period of pulse */
-		packet->len = 12;
+		packet->data[1] = 0x00;
+		packet->data[2] = xpad->odata_serial++;
+		packet->data[3] = 0x09;
+		packet->data[4] = 0x00;
+		packet->data[5] = 0x0F;
+		packet->data[6] = 0x00;
+		packet->data[7] = 0x00;
+		packet->data[8] = strong / 512;	/* left actuator */
+		packet->data[9] = weak / 512;	/* right actuator */
+		packet->data[10] = 0xFF; /* on period */
+		packet->data[11] = 0x00; /* off period */
+		packet->data[12] = 0xFF; /* repeat count */
+		packet->len = 13;
 		packet->pending = true;
 		break;
 
@@ -1090,7 +1411,7 @@ static void xpad_send_led_command(struct usb_xpad *xpad, int command)
  */
 static void xpad_identify_controller(struct usb_xpad *xpad)
 {
-	xpad_send_led_command(xpad, (xpad->pad_nr % 4) + 2);
+	led_set_brightness(&xpad->led->led_cdev, (xpad->pad_nr % 4) + 2);
 }
 
 static void xpad_led_set(struct led_classdev *led_cdev,
@@ -1127,19 +1448,13 @@ static int xpad_led_probe(struct usb_xpad *xpad)
 	led_cdev = &led->led_cdev;
 	led_cdev->name = led->name;
 	led_cdev->brightness_set = xpad_led_set;
+	led_cdev->flags = LED_CORE_SUSPENDRESUME;
 
 	error = led_classdev_register(&xpad->udev->dev, led_cdev);
 	if (error)
 		goto err_free_id;
 
-	if (xpad->xtype == XTYPE_XBOX360) {
-		/*
-		 * Light up the segment corresponding to controller
-		 * number on wired devices. On wireless we'll do that
-		 * when they respond to "presence" packet.
-		 */
-		xpad_identify_controller(xpad);
-	}
+	xpad_identify_controller(xpad);
 
 	return 0;
 
@@ -1164,41 +1479,110 @@ static void xpad_led_disconnect(struct usb_xpad *xpad)
 #else
 static int xpad_led_probe(struct usb_xpad *xpad) { return 0; }
 static void xpad_led_disconnect(struct usb_xpad *xpad) { }
-static void xpad_identify_controller(struct usb_xpad *xpad) { }
 #endif
 
-static int xpad_open(struct input_dev *dev)
+static int xpad_start_input(struct usb_xpad *xpad)
 {
-	struct usb_xpad *xpad = input_get_drvdata(dev);
-
-	/* URB was submitted in probe */
-	if (xpad->xtype == XTYPE_XBOX360W)
-		return 0;
+	int error;
 
-	xpad->irq_in->dev = xpad->udev;
 	if (usb_submit_urb(xpad->irq_in, GFP_KERNEL))
 		return -EIO;
 
-	if (xpad->xtype == XTYPE_XBOXONE)
-		return xpad_start_xbox_one(xpad);
+	if (xpad->xtype == XTYPE_XBOXONE) {
+		error = xpad_start_xbox_one(xpad);
+		if (error) {
+			usb_kill_urb(xpad->irq_in);
+			return error;
+		}
+	}
 
 	return 0;
 }
 
-static void xpad_close(struct input_dev *dev)
+static void xpad_stop_input(struct usb_xpad *xpad)
 {
-	struct usb_xpad *xpad = input_get_drvdata(dev);
+	usb_kill_urb(xpad->irq_in);
+}
 
-	if (xpad->xtype != XTYPE_XBOX360W)
+static void xpad360w_poweroff_controller(struct usb_xpad *xpad)
+{
+	unsigned long flags;
+	struct xpad_output_packet *packet =
+			&xpad->out_packets[XPAD_OUT_CMD_IDX];
+
+	spin_lock_irqsave(&xpad->odata_lock, flags);
+
+	packet->data[0] = 0x00;
+	packet->data[1] = 0x00;
+	packet->data[2] = 0x08;
+	packet->data[3] = 0xC0;
+	packet->data[4] = 0x00;
+	packet->data[5] = 0x00;
+	packet->data[6] = 0x00;
+	packet->data[7] = 0x00;
+	packet->data[8] = 0x00;
+	packet->data[9] = 0x00;
+	packet->data[10] = 0x00;
+	packet->data[11] = 0x00;
+	packet->len = 12;
+	packet->pending = true;
+
+	/* Reset the sequence so we send out poweroff now */
+	xpad->last_out_packet = -1;
+	xpad_try_sending_next_out_packet(xpad);
+
+	spin_unlock_irqrestore(&xpad->odata_lock, flags);
+}
+
+static int xpad360w_start_input(struct usb_xpad *xpad)
+{
+	int error;
+
+	error = usb_submit_urb(xpad->irq_in, GFP_KERNEL);
+	if (error)
+		return -EIO;
+
+	/*
+	 * Send presence packet.
+	 * This will force the controller to resend connection packets.
+	 * This is useful in the case we activate the module after the
+	 * adapter has been plugged in, as it won't automatically
+	 * send us info about the controllers.
+	 */
+	error = xpad_inquiry_pad_presence(xpad);
+	if (error) {
 		usb_kill_urb(xpad->irq_in);
+		return error;
+	}
 
-	xpad_stop_output(xpad);
+	return 0;
+}
+
+static void xpad360w_stop_input(struct usb_xpad *xpad)
+{
+	usb_kill_urb(xpad->irq_in);
+
+	/* Make sure we are done with presence work if it was scheduled */
+	flush_work(&xpad->work);
+}
+
+static int xpad_open(struct input_dev *dev)
+{
+	struct usb_xpad *xpad = input_get_drvdata(dev);
+
+	return xpad_start_input(xpad);
+}
+
+static void xpad_close(struct input_dev *dev)
+{
+	struct usb_xpad *xpad = input_get_drvdata(dev);
+
+	xpad_stop_input(xpad);
 }
 
 static void xpad_set_up_abs(struct input_dev *input_dev, signed short abs)
 {
 	struct usb_xpad *xpad = input_get_drvdata(input_dev);
-	set_bit(abs, input_dev->absbit);
 
 	switch (abs) {
 	case ABS_X:
@@ -1218,13 +1602,19 @@ static void xpad_set_up_abs(struct input_dev *input_dev, signed short abs)
 	case ABS_HAT0Y:	/* the d-pad (only if dpad is mapped to axes */
 		input_set_abs_params(input_dev, abs, -1, 1, 0, 0);
 		break;
+	default:
+		input_set_abs_params(input_dev, abs, 0, 0, 0, 0);
+		break;
 	}
 }
 
 static void xpad_deinit_input(struct usb_xpad *xpad)
 {
-	xpad_led_disconnect(xpad);
-	input_unregister_device(xpad->dev);
+	if (xpad->input_created) {
+		xpad->input_created = false;
+		xpad_led_disconnect(xpad);
+		input_unregister_device(xpad->dev);
+	}
 }
 
 static int xpad_init_input(struct usb_xpad *xpad)
@@ -1250,13 +1640,12 @@ static int xpad_init_input(struct usb_xpad *xpad)
 
 	input_set_drvdata(input_dev, xpad);
 
-	input_dev->open = xpad_open;
-	input_dev->close = xpad_close;
-
-	__set_bit(EV_KEY, input_dev->evbit);
+	if (xpad->xtype != XTYPE_XBOX360W) {
+		input_dev->open = xpad_open;
+		input_dev->close = xpad_close;
+	}
 
 	if (!(xpad->mapping & MAP_STICKS_TO_NULL)) {
-		__set_bit(EV_ABS, input_dev->evbit);
 		/* set up axes */
 		for (i = 0; xpad_abs[i] >= 0; i++)
 			xpad_set_up_abs(input_dev, xpad_abs[i]);
@@ -1264,21 +1653,22 @@ static int xpad_init_input(struct usb_xpad *xpad)
 
 	/* set up standard buttons */
 	for (i = 0; xpad_common_btn[i] >= 0; i++)
-		__set_bit(xpad_common_btn[i], input_dev->keybit);
+		input_set_capability(input_dev, EV_KEY, xpad_common_btn[i]);
 
 	/* set up model-specific ones */
 	if (xpad->xtype == XTYPE_XBOX360 || xpad->xtype == XTYPE_XBOX360W ||
 	    xpad->xtype == XTYPE_XBOXONE) {
 		for (i = 0; xpad360_btn[i] >= 0; i++)
-			__set_bit(xpad360_btn[i], input_dev->keybit);
+			input_set_capability(input_dev, EV_KEY, xpad360_btn[i]);
 	} else {
 		for (i = 0; xpad_btn[i] >= 0; i++)
-			__set_bit(xpad_btn[i], input_dev->keybit);
+			input_set_capability(input_dev, EV_KEY, xpad_btn[i]);
 	}
 
 	if (xpad->mapping & MAP_DPAD_TO_BUTTONS) {
 		for (i = 0; xpad_btn_pad[i] >= 0; i++)
-			__set_bit(xpad_btn_pad[i], input_dev->keybit);
+			input_set_capability(input_dev, EV_KEY,
+					     xpad_btn_pad[i]);
 	}
 
 	/*
@@ -1295,7 +1685,8 @@ static int xpad_init_input(struct usb_xpad *xpad)
 
 	if (xpad->mapping & MAP_TRIGGERS_TO_BUTTONS) {
 		for (i = 0; xpad_btn_triggers[i] >= 0; i++)
-			__set_bit(xpad_btn_triggers[i], input_dev->keybit);
+			input_set_capability(input_dev, EV_KEY,
+					     xpad_btn_triggers[i]);
 	} else {
 		for (i = 0; xpad_abs_triggers[i] >= 0; i++)
 			xpad_set_up_abs(input_dev, xpad_abs_triggers[i]);
@@ -1313,6 +1704,7 @@ static int xpad_init_input(struct usb_xpad *xpad)
 	if (error)
 		goto err_disconnect_led;
 
+	xpad->input_created = true;
 	return 0;
 
 err_disconnect_led:
@@ -1328,8 +1720,7 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id
 {
 	struct usb_device *udev = interface_to_usbdev(intf);
 	struct usb_xpad *xpad;
-	struct usb_endpoint_descriptor *ep_irq_in;
-	int ep_irq_in_idx;
+	struct usb_endpoint_descriptor *ep_irq_in, *ep_irq_out;
 	int i, error;
 
 	if (intf->cur_altsetting->desc.bNumEndpoints != 2)
@@ -1366,6 +1757,7 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id
 	xpad->mapping = xpad_device[i].mapping;
 	xpad->xtype = xpad_device[i].xtype;
 	xpad->name = xpad_device[i].name;
+	INIT_WORK(&xpad->work, xpad_presence_work);
 
 	if (xpad->xtype == XTYPE_UNKNOWN) {
 		if (intf->cur_altsetting->desc.bInterfaceClass == USB_CLASS_VENDOR_SPEC) {
@@ -1398,13 +1790,28 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id
 		goto err_free_in_urb;
 	}
 
-	error = xpad_init_output(intf, xpad);
-	if (error)
+	ep_irq_in = ep_irq_out = NULL;
+
+	for (i = 0; i < 2; i++) {
+		struct usb_endpoint_descriptor *ep =
+				&intf->cur_altsetting->endpoint[i].desc;
+
+		if (usb_endpoint_xfer_int(ep)) {
+			if (usb_endpoint_dir_in(ep))
+				ep_irq_in = ep;
+			else
+				ep_irq_out = ep;
+		}
+	}
+
+	if (!ep_irq_in || !ep_irq_out) {
+		error = -ENODEV;
 		goto err_free_in_urb;
+	}
 
-	/* Xbox One controller has in/out endpoints swapped. */
-	ep_irq_in_idx = xpad->xtype == XTYPE_XBOXONE ? 1 : 0;
-	ep_irq_in = &intf->cur_altsetting->endpoint[ep_irq_in_idx].desc;
+	error = xpad_init_output(intf, xpad, ep_irq_out);
+	if (error)
+		goto err_free_in_urb;
 
 	usb_fill_int_urb(xpad->irq_in, udev,
 			 usb_rcvintpipe(udev, ep_irq_in->bEndpointAddress),
@@ -1415,10 +1822,6 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id
 
 	usb_set_intfdata(intf, xpad);
 
-	error = xpad_init_input(xpad);
-	if (error)
-		goto err_deinit_output;
-
 	if (xpad->xtype == XTYPE_XBOX360W) {
 		/*
 		 * Submit the int URB immediately rather than waiting for open
@@ -1427,28 +1830,24 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id
 		 * exactly the message that a controller has arrived that
 		 * we're waiting for.
 		 */
-		xpad->irq_in->dev = xpad->udev;
-		error = usb_submit_urb(xpad->irq_in, GFP_KERNEL);
+		error = xpad360w_start_input(xpad);
 		if (error)
-			goto err_deinit_input;
-
+			goto err_deinit_output;
 		/*
-		 * Send presence packet.
-		 * This will force the controller to resend connection packets.
-		 * This is useful in the case we activate the module after the
-		 * adapter has been plugged in, as it won't automatically
-		 * send us info about the controllers.
+		 * Wireless controllers require RESET_RESUME to work properly
+		 * after suspend. Ideally this quirk should be in usb core
+		 * quirk list, but we have too many vendors producing these
+		 * controllers and we'd need to maintain 2 identical lists
+		 * here in this driver and in usb core.
 		 */
-		error = xpad_inquiry_pad_presence(xpad);
+		udev->quirks |= USB_QUIRK_RESET_RESUME;
+	} else {
+		error = xpad_init_input(xpad);
 		if (error)
-			goto err_kill_in_urb;
+			goto err_deinit_output;
 	}
 	return 0;
 
-err_kill_in_urb:
-	usb_kill_urb(xpad->irq_in);
-err_deinit_input:
-	xpad_deinit_input(xpad);
 err_deinit_output:
 	xpad_deinit_output(xpad);
 err_free_in_urb:
@@ -1458,19 +1857,24 @@ err_free_idata:
 err_free_mem:
 	kfree(xpad);
 	return error;
-
 }
 
 static void xpad_disconnect(struct usb_interface *intf)
 {
-	struct usb_xpad *xpad = usb_get_intfdata (intf);
+	struct usb_xpad *xpad = usb_get_intfdata(intf);
+
+	if (xpad->xtype == XTYPE_XBOX360W)
+		xpad360w_stop_input(xpad);
 
 	xpad_deinit_input(xpad);
-	xpad_deinit_output(xpad);
 
-	if (xpad->xtype == XTYPE_XBOX360W) {
-		usb_kill_urb(xpad->irq_in);
-	}
+	/*
+	 * Now that both input device and LED device are gone we can
+	 * stop output URB.
+	 */
+	xpad_stop_output(xpad);
+
+	xpad_deinit_output(xpad);
 
 	usb_free_urb(xpad->irq_in);
 	usb_free_coherent(xpad->udev, XPAD_PKT_LEN,
@@ -1481,10 +1885,72 @@ static void xpad_disconnect(struct usb_interface *intf)
 	usb_set_intfdata(intf, NULL);
 }
 
+static int xpad_suspend(struct usb_interface *intf, pm_message_t message)
+{
+	struct usb_xpad *xpad = usb_get_intfdata(intf);
+	struct input_dev *input = xpad->dev;
+
+	if (xpad->xtype == XTYPE_XBOX360W) {
+		/*
+		 * Wireless controllers always listen to input so
+		 * they are notified when controller shows up
+		 * or goes away.
+		 */
+		xpad360w_stop_input(xpad);
+
+		/*
+		 * The wireless adapter is going off now, so the
+		 * gamepads are going to become disconnected.
+		 * Unless explicitly disabled, power them down
+		 * so they don't just sit there flashing.
+		 */
+		if (auto_poweroff && xpad->pad_present)
+			xpad360w_poweroff_controller(xpad);
+	} else {
+		mutex_lock(&input->mutex);
+		if (input->users)
+			xpad_stop_input(xpad);
+		mutex_unlock(&input->mutex);
+	}
+
+	xpad_stop_output(xpad);
+
+	return 0;
+}
+
+static int xpad_resume(struct usb_interface *intf)
+{
+	struct usb_xpad *xpad = usb_get_intfdata(intf);
+	struct input_dev *input = xpad->dev;
+	int retval = 0;
+
+	if (xpad->xtype == XTYPE_XBOX360W) {
+		retval = xpad360w_start_input(xpad);
+	} else {
+		mutex_lock(&input->mutex);
+		if (input->users) {
+			retval = xpad_start_input(xpad);
+		} else if (xpad->xtype == XTYPE_XBOXONE) {
+			/*
+			 * Even if there are no users, we'll send Xbox One pads
+			 * the startup sequence so they don't sit there and
+			 * blink until somebody opens the input device again.
+			 */
+			retval = xpad_start_xbox_one(xpad);
+		}
+		mutex_unlock(&input->mutex);
+	}
+
+	return retval;
+}
+
 static struct usb_driver xpad_driver = {
 	.name		= "xpad",
 	.probe		= xpad_probe,
 	.disconnect	= xpad_disconnect,
+	.suspend	= xpad_suspend,
+	.resume		= xpad_resume,
+	.reset_resume	= xpad_resume,
 	.id_table	= xpad_table,
 };
 
diff --git a/drivers/net/can/dev.c b/drivers/net/can/dev.c
index eab132778e67..1dbee1cb3df9 100644
--- a/drivers/net/can/dev.c
+++ b/drivers/net/can/dev.c
@@ -423,6 +423,34 @@ void can_put_echo_skb(struct sk_buff *skb, struct net_device *dev,
 }
 EXPORT_SYMBOL_GPL(can_put_echo_skb);
 
+struct sk_buff *__can_get_echo_skb(struct net_device *dev, unsigned int idx, u8 *len_ptr)
+{
+	struct can_priv *priv = netdev_priv(dev);
+	struct sk_buff *skb = priv->echo_skb[idx];
+	struct canfd_frame *cf;
+
+	if (idx >= priv->echo_skb_max) {
+		netdev_err(dev, "%s: BUG! Trying to access can_priv::echo_skb out of bounds (%u/max %u)\n",
+			   __func__, idx, priv->echo_skb_max);
+		return NULL;
+	}
+
+	if (!skb) {
+		netdev_err(dev, "%s: BUG! Trying to echo non existing skb: can_priv::echo_skb[%u]\n",
+			   __func__, idx);
+		return NULL;
+	}
+
+	/* Using "struct canfd_frame::len" for the frame
+	 * length is supported on both CAN and CANFD frames.
+	 */
+	cf = (struct canfd_frame *)skb->data;
+	*len_ptr = cf->len;
+	priv->echo_skb[idx] = NULL;
+
+	return skb;
+}
+
 /*
  * Get the skb from the stack and loop it back locally
  *
@@ -432,22 +460,16 @@ EXPORT_SYMBOL_GPL(can_put_echo_skb);
  */
 unsigned int can_get_echo_skb(struct net_device *dev, unsigned int idx)
 {
-	struct can_priv *priv = netdev_priv(dev);
-
-	BUG_ON(idx >= priv->echo_skb_max);
-
-	if (priv->echo_skb[idx]) {
-		struct sk_buff *skb = priv->echo_skb[idx];
-		struct can_frame *cf = (struct can_frame *)skb->data;
-		u8 dlc = cf->can_dlc;
+	struct sk_buff *skb;
+	u8 len;
 
-		netif_rx(priv->echo_skb[idx]);
-		priv->echo_skb[idx] = NULL;
+	skb = __can_get_echo_skb(dev, idx, &len);
+	if (!skb)
+		return 0;
 
-		return dlc;
-	}
+	netif_rx(skb);
 
-	return 0;
+	return len;
 }
 EXPORT_SYMBOL_GPL(can_get_echo_skb);
 
diff --git a/drivers/net/ethernet/broadcom/genet/bcmmii.c b/drivers/net/ethernet/broadcom/genet/bcmmii.c
index 4c73feca4842..0565efad6e6e 100644
--- a/drivers/net/ethernet/broadcom/genet/bcmmii.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmmii.c
@@ -491,7 +491,7 @@ static int bcmgenet_mii_of_init(struct bcmgenet_priv *priv)
 	if (!compat)
 		return -ENOMEM;
 
-	priv->mdio_dn = of_find_compatible_node(dn, NULL, compat);
+	priv->mdio_dn = of_get_compatible_child(dn, compat);
 	kfree(compat);
 	if (!priv->mdio_dn) {
 		dev_err(kdev, "unable to find MDIO bus node\n");
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 4644357d291a..398068ad0b62 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -4470,7 +4470,9 @@ static int ath10k_add_interface(struct ieee80211_hw *hw,
 	}
 
 	ar->free_vdev_map &= ~(1LL << arvif->vdev_id);
+	spin_lock_bh(&ar->data_lock);
 	list_add(&arvif->list, &ar->arvifs);
+	spin_unlock_bh(&ar->data_lock);
 
 	/* It makes no sense to have firmware do keepalives. mac80211 already
 	 * takes care of this with idle connection polling.
@@ -4603,7 +4605,9 @@ err_peer_delete:
 err_vdev_delete:
 	ath10k_wmi_vdev_delete(ar, arvif->vdev_id);
 	ar->free_vdev_map |= 1LL << arvif->vdev_id;
+	spin_lock_bh(&ar->data_lock);
 	list_del(&arvif->list);
+	spin_unlock_bh(&ar->data_lock);
 
 err:
 	if (arvif->beacon_buf) {
@@ -4647,7 +4651,9 @@ static void ath10k_remove_interface(struct ieee80211_hw *hw,
 			    arvif->vdev_id, ret);
 
 	ar->free_vdev_map |= 1LL << arvif->vdev_id;
+	spin_lock_bh(&ar->data_lock);
 	list_del(&arvif->list);
+	spin_unlock_bh(&ar->data_lock);
 
 	if (arvif->vdev_type == WMI_VDEV_TYPE_AP ||
 	    arvif->vdev_type == WMI_VDEV_TYPE_IBSS) {
diff --git a/drivers/net/wireless/cw1200/wsm.c b/drivers/net/wireless/cw1200/wsm.c
index 3dd46c78c1cc..5a595f9f47ff 100644
--- a/drivers/net/wireless/cw1200/wsm.c
+++ b/drivers/net/wireless/cw1200/wsm.c
@@ -1805,16 +1805,18 @@ static int wsm_buf_reserve(struct wsm_buf *buf, size_t extra_size)
 {
 	size_t pos = buf->data - buf->begin;
 	size_t size = pos + extra_size;
+	u8 *tmp;
 
 	size = round_up(size, FWLOAD_BLOCK_SIZE);
 
-	buf->begin = krealloc(buf->begin, size, GFP_KERNEL | GFP_DMA);
-	if (buf->begin) {
-		buf->data = &buf->begin[pos];
-		buf->end = &buf->begin[size];
-		return 0;
-	} else {
-		buf->end = buf->data = buf->begin;
+	tmp = krealloc(buf->begin, size, GFP_KERNEL | GFP_DMA);
+	if (!tmp) {
+		wsm_buf_deinit(buf);
 		return -ENOMEM;
 	}
+
+	buf->begin = tmp;
+	buf->data = &buf->begin[pos];
+	buf->end = &buf->begin[size];
+	return 0;
 }
diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
index 984cd2f05c4a..7b2a7d848a56 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c
+++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
@@ -322,8 +322,12 @@ struct ieee80211_regdomain *iwl_mvm_get_regdomain(struct wiphy *wiphy,
 		goto out;
 	}
 
-	if (changed)
-		*changed = (resp->status == MCC_RESP_NEW_CHAN_PROFILE);
+	if (changed) {
+		u32 status = le32_to_cpu(resp->status);
+
+		*changed = (status == MCC_RESP_NEW_CHAN_PROFILE ||
+			    status == MCC_RESP_ILLEGAL);
+	}
 
 	regd = iwl_parse_nvm_mcc_info(mvm->trans->dev, mvm->cfg,
 				      __le32_to_cpu(resp->n_channels),
@@ -4050,10 +4054,6 @@ static void iwl_mvm_mac_sta_statistics(struct ieee80211_hw *hw,
 	struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif);
 	struct iwl_mvm_sta *mvmsta = iwl_mvm_sta_from_mac80211(sta);
 
-	if (!fw_has_capa(&mvm->fw->ucode_capa,
-			 IWL_UCODE_TLV_CAPA_RADIO_BEACON_STATS))
-		return;
-
 	/* if beacon filtering isn't on mac80211 does it anyway */
 	if (!(vif->driver_flags & IEEE80211_VIF_BEACON_FILTER))
 		return;
diff --git a/drivers/net/wireless/iwlwifi/mvm/nvm.c b/drivers/net/wireless/iwlwifi/mvm/nvm.c
index 2ee0f6fe56a1..5509c5024352 100644
--- a/drivers/net/wireless/iwlwifi/mvm/nvm.c
+++ b/drivers/net/wireless/iwlwifi/mvm/nvm.c
@@ -667,9 +667,8 @@ iwl_mvm_update_mcc(struct iwl_mvm *mvm, const char *alpha2,
 
 	n_channels =  __le32_to_cpu(mcc_resp->n_channels);
 	IWL_DEBUG_LAR(mvm,
-		      "MCC response status: 0x%x. new MCC: 0x%x ('%c%c') change: %d n_chans: %d\n",
-		      status, mcc, mcc >> 8, mcc & 0xff,
-		      !!(status == MCC_RESP_NEW_CHAN_PROFILE), n_channels);
+		      "MCC response status: 0x%x. new MCC: 0x%x ('%c%c') n_chans: %d\n",
+		      status, mcc, mcc >> 8, mcc & 0xff, n_channels);
 
 	resp_len = sizeof(*mcc_resp) + n_channels * sizeof(__le32);
 	resp_cp = kmemdup(mcc_resp, resp_len, GFP_KERNEL);
diff --git a/drivers/net/wireless/mwifiex/cfg80211.c b/drivers/net/wireless/mwifiex/cfg80211.c
index 9a8982f581c5..1e074eaf613d 100644
--- a/drivers/net/wireless/mwifiex/cfg80211.c
+++ b/drivers/net/wireless/mwifiex/cfg80211.c
@@ -1150,6 +1150,12 @@ mwifiex_cfg80211_change_virtual_intf(struct wiphy *wiphy,
 			priv->adapter->curr_iface_comb.p2p_intf--;
 			priv->adapter->curr_iface_comb.sta_intf++;
 			dev->ieee80211_ptr->iftype = type;
+			if (mwifiex_deinit_priv_params(priv))
+				return -1;
+			if (mwifiex_init_new_priv_params(priv, dev, type))
+				return -1;
+			if (mwifiex_sta_init_cmd(priv, false, false))
+				return -1;
 			break;
 		case NL80211_IFTYPE_ADHOC:
 			if (mwifiex_cfg80211_deinit_p2p(priv))
@@ -2839,8 +2845,10 @@ int mwifiex_del_virtual_intf(struct wiphy *wiphy, struct wireless_dev *wdev)
 
 	mwifiex_stop_net_dev_queue(priv->netdev, adapter);
 
-	skb_queue_walk_safe(&priv->bypass_txq, skb, tmp)
+	skb_queue_walk_safe(&priv->bypass_txq, skb, tmp) {
+		skb_unlink(skb, &priv->bypass_txq);
 		mwifiex_write_data_complete(priv->adapter, skb, 0, -1);
+	}
 
 	if (netif_carrier_ok(priv->netdev))
 		netif_carrier_off(priv->netdev);
diff --git a/drivers/net/wireless/mwifiex/wmm.c b/drivers/net/wireless/mwifiex/wmm.c
index acccd6734e3b..ed8b69d1d65c 100644
--- a/drivers/net/wireless/mwifiex/wmm.c
+++ b/drivers/net/wireless/mwifiex/wmm.c
@@ -501,8 +501,10 @@ mwifiex_wmm_del_pkts_in_ralist_node(struct mwifiex_private *priv,
 	struct mwifiex_adapter *adapter = priv->adapter;
 	struct sk_buff *skb, *tmp;
 
-	skb_queue_walk_safe(&ra_list->skb_head, skb, tmp)
+	skb_queue_walk_safe(&ra_list->skb_head, skb, tmp) {
+		skb_unlink(skb, &ra_list->skb_head);
 		mwifiex_write_data_complete(adapter, skb, 0, -1);
+	}
 }
 
 /*
@@ -598,11 +600,15 @@ mwifiex_clean_txrx(struct mwifiex_private *priv)
 		priv->adapter->if_ops.clean_pcie_ring(priv->adapter);
 	spin_unlock_irqrestore(&priv->wmm.ra_list_spinlock, flags);
 
-	skb_queue_walk_safe(&priv->tdls_txq, skb, tmp)
+	skb_queue_walk_safe(&priv->tdls_txq, skb, tmp) {
+		skb_unlink(skb, &priv->tdls_txq);
 		mwifiex_write_data_complete(priv->adapter, skb, 0, -1);
+	}
 
-	skb_queue_walk_safe(&priv->bypass_txq, skb, tmp)
+	skb_queue_walk_safe(&priv->bypass_txq, skb, tmp) {
+		skb_unlink(skb, &priv->bypass_txq);
 		mwifiex_write_data_complete(priv->adapter, skb, 0, -1);
+	}
 	atomic_set(&priv->adapter->bypass_tx_pending, 0);
 
 	idr_for_each(&priv->ack_status_frames, mwifiex_free_ack_frame, NULL);
diff --git a/drivers/nfc/nfcmrvl/uart.c b/drivers/nfc/nfcmrvl/uart.c
index 6c0c301611c4..1b11ded79c4f 100644
--- a/drivers/nfc/nfcmrvl/uart.c
+++ b/drivers/nfc/nfcmrvl/uart.c
@@ -73,10 +73,9 @@ static int nfcmrvl_uart_parse_dt(struct device_node *node,
 	struct device_node *matched_node;
 	int ret;
 
-	matched_node = of_find_compatible_node(node, NULL, "marvell,nfc-uart");
+	matched_node = of_get_compatible_child(node, "marvell,nfc-uart");
 	if (!matched_node) {
-		matched_node = of_find_compatible_node(node, NULL,
-						       "mrvl,nfc-uart");
+		matched_node = of_get_compatible_child(node, "mrvl,nfc-uart");
 		if (!matched_node)
 			return -ENODEV;
 	}
diff --git a/drivers/of/base.c b/drivers/of/base.c
index 31341290cd91..c6e019208d17 100644
--- a/drivers/of/base.c
+++ b/drivers/of/base.c
@@ -712,6 +712,31 @@ struct device_node *of_get_next_available_child(const struct device_node *node,
 }
 EXPORT_SYMBOL(of_get_next_available_child);
 
+/**
+ * of_get_compatible_child - Find compatible child node
+ * @parent:	parent node
+ * @compatible:	compatible string
+ *
+ * Lookup child node whose compatible property contains the given compatible
+ * string.
+ *
+ * Returns a node pointer with refcount incremented, use of_node_put() on it
+ * when done; or NULL if not found.
+ */
+struct device_node *of_get_compatible_child(const struct device_node *parent,
+				const char *compatible)
+{
+	struct device_node *child;
+
+	for_each_child_of_node(parent, child) {
+		if (of_device_is_compatible(child, compatible))
+			break;
+	}
+
+	return child;
+}
+EXPORT_SYMBOL(of_get_compatible_child);
+
 /**
  *	of_get_child_by_name - Find the child node by name for a given parent
  *	@node:	parent node
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 18b19744398a..ff5df33fc740 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -685,6 +685,11 @@ qla2xxx_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *cmd)
 	srb_t *sp;
 	int rval;
 
+	if (unlikely(test_bit(UNLOADING, &base_vha->dpc_flags))) {
+		cmd->result = DID_NO_CONNECT << 16;
+		goto qc24_fail_command;
+	}
+
 	if (ha->flags.eeh_busy) {
 		if (ha->flags.pci_channel_io_perm_failure) {
 			ql_dbg(ql_dbg_aer, vha, 0x9010,
diff --git a/drivers/scsi/ufs/ufs.h b/drivers/scsi/ufs/ufs.h
index 42c459a9d3fe..ce5234555cc9 100644
--- a/drivers/scsi/ufs/ufs.h
+++ b/drivers/scsi/ufs/ufs.h
@@ -45,6 +45,7 @@
 #define QUERY_DESC_MIN_SIZE       2
 #define QUERY_OSF_SIZE            (GENERAL_UPIU_REQUEST_SIZE - \
 					(sizeof(struct utp_upiu_header)))
+#define RESPONSE_UPIU_SENSE_DATA_LENGTH	18
 
 #define UPIU_HEADER_DWORD(byte3, byte2, byte1, byte0)\
 			cpu_to_be32((byte3 << 24) | (byte2 << 16) |\
@@ -383,7 +384,7 @@ struct utp_cmd_rsp {
 	__be32 residual_transfer_count;
 	__be32 reserved[4];
 	__be16 sense_data_len;
-	u8 sense_data[18];
+	u8 sense_data[RESPONSE_UPIU_SENSE_DATA_LENGTH];
 };
 
 /**
diff --git a/drivers/scsi/ufs/ufshcd-pci.c b/drivers/scsi/ufs/ufshcd-pci.c
index d15eaa466c59..52b546fb509b 100644
--- a/drivers/scsi/ufs/ufshcd-pci.c
+++ b/drivers/scsi/ufs/ufshcd-pci.c
@@ -104,6 +104,7 @@ static void ufshcd_pci_remove(struct pci_dev *pdev)
 	pm_runtime_forbid(&pdev->dev);
 	pm_runtime_get_noresume(&pdev->dev);
 	ufshcd_remove(hba);
+	ufshcd_dealloc_host(hba);
 }
 
 /**
@@ -147,6 +148,7 @@ ufshcd_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	err = ufshcd_init(hba, mmio_base, pdev->irq);
 	if (err) {
 		dev_err(&pdev->dev, "Initialization failed\n");
+		ufshcd_dealloc_host(hba);
 		return err;
 	}
 
diff --git a/drivers/scsi/ufs/ufshcd-pltfrm.c b/drivers/scsi/ufs/ufshcd-pltfrm.c
index 9714f2a8b329..f58abfcdfe81 100644
--- a/drivers/scsi/ufs/ufshcd-pltfrm.c
+++ b/drivers/scsi/ufs/ufshcd-pltfrm.c
@@ -161,7 +161,7 @@ static int ufshcd_populate_vreg(struct device *dev, const char *name,
 	if (ret) {
 		dev_err(dev, "%s: unable to find %s err %d\n",
 				__func__, prop_name, ret);
-		goto out_free;
+		goto out;
 	}
 
 	vreg->min_uA = 0;
@@ -183,9 +183,6 @@ static int ufshcd_populate_vreg(struct device *dev, const char *name,
 
 	goto out;
 
-out_free:
-	devm_kfree(dev, vreg);
-	vreg = NULL;
 out:
 	if (!ret)
 		*out_vreg = vreg;
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index 8c58adadb728..c94d465de941 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -585,6 +585,21 @@ int ufshcd_hold(struct ufs_hba *hba, bool async)
 start:
 	switch (hba->clk_gating.state) {
 	case CLKS_ON:
+		/*
+		 * Wait for the ungate work to complete if in progress.
+		 * Though the clocks may be in ON state, the link could
+		 * still be in hibner8 state if hibern8 is allowed
+		 * during clock gating.
+		 * Make sure we exit hibern8 state also in addition to
+		 * clocks being ON.
+		 */
+		if (ufshcd_can_hibern8_during_gating(hba) &&
+		    ufshcd_is_link_hibern8(hba)) {
+			spin_unlock_irqrestore(hba->host->host_lock, flags);
+			flush_work(&hba->clk_gating.ungate_work);
+			spin_lock_irqsave(hba->host->host_lock, flags);
+			goto start;
+		}
 		break;
 	case REQ_CLKS_OFF:
 		if (cancel_delayed_work(&hba->clk_gating.gate_work)) {
@@ -813,10 +828,14 @@ static inline void ufshcd_copy_sense_data(struct ufshcd_lrb *lrbp)
 	int len;
 	if (lrbp->sense_buffer &&
 	    ufshcd_get_rsp_upiu_data_seg_len(lrbp->ucd_rsp_ptr)) {
+		int len_to_copy;
+
 		len = be16_to_cpu(lrbp->ucd_rsp_ptr->sr.sense_data_len);
+		len_to_copy = min_t(int, RESPONSE_UPIU_SENSE_DATA_LENGTH, len);
+
 		memcpy(lrbp->sense_buffer,
 			lrbp->ucd_rsp_ptr->sr.sense_data,
-			min_t(int, len, SCSI_SENSE_BUFFERSIZE));
+			min_t(int, len_to_copy, SCSI_SENSE_BUFFERSIZE));
 	}
 }
 
@@ -5251,7 +5270,10 @@ EXPORT_SYMBOL(ufshcd_system_suspend);
 
 int ufshcd_system_resume(struct ufs_hba *hba)
 {
-	if (!hba || !hba->is_powered || pm_runtime_suspended(hba->dev))
+	if (!hba)
+		return -EINVAL;
+
+	if (!hba->is_powered || pm_runtime_suspended(hba->dev))
 		/*
 		 * Let the runtime resume take care of resuming
 		 * if runtime suspended.
@@ -5272,7 +5294,10 @@ EXPORT_SYMBOL(ufshcd_system_resume);
  */
 int ufshcd_runtime_suspend(struct ufs_hba *hba)
 {
-	if (!hba || !hba->is_powered)
+	if (!hba)
+		return -EINVAL;
+
+	if (!hba->is_powered)
 		return 0;
 
 	return ufshcd_suspend(hba, UFS_RUNTIME_PM);
@@ -5302,10 +5327,13 @@ EXPORT_SYMBOL(ufshcd_runtime_suspend);
  */
 int ufshcd_runtime_resume(struct ufs_hba *hba)
 {
-	if (!hba || !hba->is_powered)
+	if (!hba)
+		return -EINVAL;
+
+	if (!hba->is_powered)
 		return 0;
-	else
-		return ufshcd_resume(hba, UFS_RUNTIME_PM);
+
+	return ufshcd_resume(hba, UFS_RUNTIME_PM);
 }
 EXPORT_SYMBOL(ufshcd_runtime_resume);
 
@@ -5357,8 +5385,6 @@ void ufshcd_remove(struct ufs_hba *hba)
 	ufshcd_disable_intr(hba, hba->intr_mask);
 	ufshcd_hba_stop(hba);
 
-	scsi_host_put(hba->host);
-
 	ufshcd_exit_clk_gating(hba);
 	if (ufshcd_is_clkscaling_enabled(hba))
 		devfreq_remove_device(hba->devfreq);
@@ -5483,15 +5509,47 @@ static int ufshcd_devfreq_target(struct device *dev,
 {
 	int err = 0;
 	struct ufs_hba *hba = dev_get_drvdata(dev);
+	bool release_clk_hold = false;
+	unsigned long irq_flags;
 
 	if (!ufshcd_is_clkscaling_enabled(hba))
 		return -EINVAL;
 
+	spin_lock_irqsave(hba->host->host_lock, irq_flags);
+	if (ufshcd_eh_in_progress(hba)) {
+		spin_unlock_irqrestore(hba->host->host_lock, irq_flags);
+		return 0;
+	}
+
+	if (ufshcd_is_clkgating_allowed(hba) &&
+	    (hba->clk_gating.state != CLKS_ON)) {
+		if (cancel_delayed_work(&hba->clk_gating.gate_work)) {
+			/* hold the vote until the scaling work is completed */
+			hba->clk_gating.active_reqs++;
+			release_clk_hold = true;
+			hba->clk_gating.state = CLKS_ON;
+		} else {
+			/*
+			 * Clock gating work seems to be running in parallel
+			 * hence skip scaling work to avoid deadlock between
+			 * current scaling work and gating work.
+			 */
+			spin_unlock_irqrestore(hba->host->host_lock, irq_flags);
+			return 0;
+		}
+	}
+	spin_unlock_irqrestore(hba->host->host_lock, irq_flags);
+
 	if (*freq == UINT_MAX)
 		err = ufshcd_scale_clks(hba, true);
 	else if (*freq == 0)
 		err = ufshcd_scale_clks(hba, false);
 
+	spin_lock_irqsave(hba->host->host_lock, irq_flags);
+	if (release_clk_hold)
+		__ufshcd_release(hba);
+	spin_unlock_irqrestore(hba->host->host_lock, irq_flags);
+
 	return err;
 }
 
@@ -5673,7 +5731,6 @@ exit_gating:
 	ufshcd_exit_clk_gating(hba);
 out_disable:
 	hba->is_irq_enabled = false;
-	scsi_host_put(host);
 	ufshcd_hba_exit(hba);
 out_error:
 	return err;
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index b1ec202099b2..b74de014cef1 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -165,15 +165,29 @@ static inline int tty_put_user(struct tty_struct *tty, unsigned char x,
 	return put_user(x, ptr);
 }
 
+/* If we are not echoing the data, perhaps this is a secret so erase it */
+static inline void zero_buffer(struct tty_struct *tty, u8 *buffer, int size)
+{
+	bool icanon = !!L_ICANON(tty);
+	bool no_echo = !L_ECHO(tty);
+
+	if (icanon && no_echo)
+		memset(buffer, 0x00, size);
+}
+
 static inline int tty_copy_to_user(struct tty_struct *tty,
 					void __user *to,
-					const void *from,
+					void *from,
 					unsigned long n)
 {
 	struct n_tty_data *ldata = tty->disc_data;
+	int retval;
 
 	tty_audit_add_data(tty, from, n, ldata->icanon);
-	return copy_to_user(to, from, n);
+	retval = copy_to_user(to, from, n);
+	if (!retval)
+		zero_buffer(tty, from, n);
+	return retval;
 }
 
 /**
@@ -2005,6 +2019,7 @@ static int copy_from_read_buf(struct tty_struct *tty,
 		is_eof = n == 1 && read_buf(ldata, tail) == EOF_CHAR(tty);
 		tty_audit_add_data(tty, read_buf_addr(ldata, tail), n,
 				ldata->icanon);
+		zero_buffer(tty, read_buf_addr(ldata, tail), n);
 		smp_store_release(&ldata->read_tail, ldata->read_tail + n);
 		/* Turn single EOF into zero-length read */
 		if (L_EXTPROC(tty) && ldata->icanon && is_eof &&
diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c
index 8f3566cde3eb..355e9cad680d 100644
--- a/drivers/tty/tty_buffer.c
+++ b/drivers/tty/tty_buffer.c
@@ -454,6 +454,8 @@ receive_buf(struct tty_struct *tty, struct tty_buffer *head, int count)
 		if (count && disc->ops->receive_buf)
 			disc->ops->receive_buf(tty, p, f, count);
 	}
+	if (count > 0)
+		memset(p, 0, count);
 	return count;
 }
 
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 2facffea2ee0..f7af730aae82 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -2757,7 +2757,9 @@ static int hub_port_reset(struct usb_hub *hub, int port1,
 					USB_PORT_FEAT_C_BH_PORT_RESET);
 			usb_clear_port_feature(hub->hdev, port1,
 					USB_PORT_FEAT_C_PORT_LINK_STATE);
-			usb_clear_port_feature(hub->hdev, port1,
+
+			if (udev)
+				usb_clear_port_feature(hub->hdev, port1,
 					USB_PORT_FEAT_C_CONNECTION);
 
 			/*
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index aee29604bd79..5d21cd8359d4 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -744,7 +744,7 @@ static u32 xhci_get_port_status(struct usb_hcd *hcd,
 			status |= USB_PORT_STAT_SUSPEND;
 	}
 	if ((raw_port_status & PORT_PLS_MASK) == XDEV_RESUME &&
-		!DEV_SUPERSPEED_ANY(raw_port_status)) {
+		!DEV_SUPERSPEED_ANY(raw_port_status) && hcd->speed < HCD_USB3) {
 		if ((raw_port_status & PORT_RESET) ||
 				!(raw_port_status & PORT_PE))
 			return 0xffffffff;
@@ -790,7 +790,7 @@ static u32 xhci_get_port_status(struct usb_hcd *hcd,
 			time_left = wait_for_completion_timeout(
 					&bus_state->rexit_done[wIndex],
 					msecs_to_jiffies(
-						XHCI_MAX_REXIT_TIMEOUT));
+						XHCI_MAX_REXIT_TIMEOUT_MS));
 			spin_lock_irqsave(&xhci->lock, flags);
 
 			if (time_left) {
@@ -804,7 +804,7 @@ static u32 xhci_get_port_status(struct usb_hcd *hcd,
 			} else {
 				int port_status = readl(port_array[wIndex]);
 				xhci_warn(xhci, "Port resume took longer than %i msec, port status = 0x%x\n",
-						XHCI_MAX_REXIT_TIMEOUT,
+						XHCI_MAX_REXIT_TIMEOUT_MS,
 						port_status);
 				status |= USB_PORT_STAT_SUSPEND;
 				clear_bit(wIndex, &bus_state->rexit_ports);
@@ -1298,13 +1298,16 @@ int xhci_bus_suspend(struct usb_hcd *hcd)
 	__le32 __iomem **port_array;
 	struct xhci_bus_state *bus_state;
 	unsigned long flags;
+	u32 portsc_buf[USB_MAXCHILDREN];
+	bool wake_enabled;
 
 	max_ports = xhci_get_ports(hcd, &port_array);
 	bus_state = &xhci->bus_state[hcd_index(hcd)];
+	wake_enabled = hcd->self.root_hub->do_remote_wakeup;
 
 	spin_lock_irqsave(&xhci->lock, flags);
 
-	if (hcd->self.root_hub->do_remote_wakeup) {
+	if (wake_enabled) {
 		if (bus_state->resuming_ports ||	/* USB2 */
 		    bus_state->port_remote_wakeup) {	/* USB3 */
 			spin_unlock_irqrestore(&xhci->lock, flags);
@@ -1312,26 +1315,36 @@ int xhci_bus_suspend(struct usb_hcd *hcd)
 			return -EBUSY;
 		}
 	}
-
-	port_index = max_ports;
+	/*
+	 * Prepare ports for suspend, but don't write anything before all ports
+	 * are checked and we know bus suspend can proceed
+	 */
 	bus_state->bus_suspended = 0;
+	port_index = max_ports;
 	while (port_index--) {
-		/* suspend the port if the port is not suspended */
 		u32 t1, t2;
-		int slot_id;
 
 		t1 = readl(port_array[port_index]);
 		t2 = xhci_port_state_to_neutral(t1);
+		portsc_buf[port_index] = 0;
 
-		if ((t1 & PORT_PE) && !(t1 & PORT_PLS_MASK)) {
-			xhci_dbg(xhci, "port %d not suspended\n", port_index);
-			slot_id = xhci_find_slot_id_by_port(hcd, xhci,
-					port_index + 1);
-			if (slot_id) {
+		/* Bail out if a USB3 port has a new device in link training */
+		if ((t1 & PORT_PLS_MASK) == XDEV_POLLING) {
+			bus_state->bus_suspended = 0;
+			spin_unlock_irqrestore(&xhci->lock, flags);
+			xhci_dbg(xhci, "Bus suspend bailout, port in polling\n");
+			return -EBUSY;
+		}
+
+		/* suspend ports in U0, or bail out for new connect changes */
+		if ((t1 & PORT_PE) && (t1 & PORT_PLS_MASK) == XDEV_U0) {
+			if ((t1 & PORT_CSC) && wake_enabled) {
+				bus_state->bus_suspended = 0;
 				spin_unlock_irqrestore(&xhci->lock, flags);
-				xhci_stop_device(xhci, slot_id, 1);
-				spin_lock_irqsave(&xhci->lock, flags);
+				xhci_dbg(xhci, "Bus suspend bailout, port connect change\n");
+				return -EBUSY;
 			}
+			xhci_dbg(xhci, "port %d not suspended\n", port_index);
 			t2 &= ~PORT_PLS_MASK;
 			t2 |= PORT_LINK_STROBE | XDEV_U3;
 			set_bit(port_index, &bus_state->bus_suspended);
@@ -1340,7 +1353,7 @@ int xhci_bus_suspend(struct usb_hcd *hcd)
 		 * including the USB 3.0 roothub, but only if CONFIG_PM
 		 * is enabled, so also enable remote wake here.
 		 */
-		if (hcd->self.root_hub->do_remote_wakeup) {
+		if (wake_enabled) {
 			if (t1 & PORT_CONNECT) {
 				t2 |= PORT_WKOC_E | PORT_WKDISC_E;
 				t2 &= ~PORT_WKCONN_E;
@@ -1353,7 +1366,26 @@ int xhci_bus_suspend(struct usb_hcd *hcd)
 
 		t1 = xhci_port_state_to_neutral(t1);
 		if (t1 != t2)
-			writel(t2, port_array[port_index]);
+			portsc_buf[port_index] = t2;
+	}
+
+	/* write port settings, stopping and suspending ports if needed */
+	port_index = max_ports;
+	while (port_index--) {
+		if (!portsc_buf[port_index])
+			continue;
+		if (test_bit(port_index, &bus_state->bus_suspended)) {
+			int slot_id;
+
+			slot_id = xhci_find_slot_id_by_port(hcd, xhci,
+							    port_index + 1);
+			if (slot_id) {
+				spin_unlock_irqrestore(&xhci->lock, flags);
+				xhci_stop_device(xhci, slot_id, 1);
+				spin_lock_irqsave(&xhci->lock, flags);
+			}
+		}
+		writel(portsc_buf[port_index], port_array[port_index]);
 	}
 	hcd->state = HC_STATE_SUSPENDED;
 	bus_state->next_statechange = jiffies + msecs_to_jiffies(10);
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index ece0787d62bf..845fa426fa0d 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -1673,7 +1673,7 @@ static void handle_port_status(struct xhci_hcd *xhci,
 	 * RExit to a disconnect state).  If so, let the the driver know it's
 	 * out of the RExit state.
 	 */
-	if (!DEV_SUPERSPEED_ANY(temp) &&
+	if (!DEV_SUPERSPEED_ANY(temp) && hcd->speed < HCD_USB3 &&
 			test_and_clear_bit(faked_port_index,
 				&bus_state->rexit_ports)) {
 		complete(&bus_state->rexit_done[faked_port_index]);
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 84d8871755b7..0635cea42e6f 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1490,7 +1490,7 @@ struct xhci_bus_state {
  * It can take up to 20 ms to transition from RExit to U0 on the
  * Intel Lynx Point LP xHCI host.
  */
-#define	XHCI_MAX_REXIT_TIMEOUT	(20 * 1000)
+#define	XHCI_MAX_REXIT_TIMEOUT_MS	20
 
 static inline unsigned int hcd_index(struct usb_hcd *hcd)
 {
diff --git a/fs/9p/vfs_dir.c b/fs/9p/vfs_dir.c
index 5cc00e56206e..7d889f56b8e7 100644
--- a/fs/9p/vfs_dir.c
+++ b/fs/9p/vfs_dir.c
@@ -76,15 +76,6 @@ static inline int dt_type(struct p9_wstat *mistat)
 	return rettype;
 }
 
-static void p9stat_init(struct p9_wstat *stbuf)
-{
-	stbuf->name  = NULL;
-	stbuf->uid   = NULL;
-	stbuf->gid   = NULL;
-	stbuf->muid  = NULL;
-	stbuf->extension = NULL;
-}
-
 /**
  * v9fs_alloc_rdir_buf - Allocate buffer used for read and readdir
  * @filp: opened file structure
@@ -145,12 +136,10 @@ static int v9fs_dir_readdir(struct file *file, struct dir_context *ctx)
 			rdir->tail = n;
 		}
 		while (rdir->head < rdir->tail) {
-			p9stat_init(&st);
 			err = p9stat_read(fid->clnt, rdir->buf + rdir->head,
 					  rdir->tail - rdir->head, &st);
 			if (err) {
 				p9_debug(P9_DEBUG_VFS, "returned %d\n", err);
-				p9stat_free(&st);
 				return -EIO;
 			}
 			reclen = st.size+2;
diff --git a/fs/bfs/inode.c b/fs/bfs/inode.c
index fdcb4d69f430..4714c55c1ae5 100644
--- a/fs/bfs/inode.c
+++ b/fs/bfs/inode.c
@@ -350,7 +350,8 @@ static int bfs_fill_super(struct super_block *s, void *data, int silent)
 
 	s->s_magic = BFS_MAGIC;
 
-	if (le32_to_cpu(bfs_sb->s_start) > le32_to_cpu(bfs_sb->s_end)) {
+	if (le32_to_cpu(bfs_sb->s_start) > le32_to_cpu(bfs_sb->s_end) ||
+	    le32_to_cpu(bfs_sb->s_start) < BFS_BSIZE) {
 		printf("Superblock is corrupted\n");
 		goto out1;
 	}
@@ -359,9 +360,11 @@ static int bfs_fill_super(struct super_block *s, void *data, int silent)
 					sizeof(struct bfs_inode)
 					+ BFS_ROOT_INO - 1;
 	imap_len = (info->si_lasti / 8) + 1;
-	info->si_imap = kzalloc(imap_len, GFP_KERNEL);
-	if (!info->si_imap)
+	info->si_imap = kzalloc(imap_len, GFP_KERNEL | __GFP_NOWARN);
+	if (!info->si_imap) {
+		printf("Cannot allocate %u bytes\n", imap_len);
 		goto out1;
+	}
 	for (i = 0; i < BFS_ROOT_INO; i++)
 		set_bit(i, info->si_imap);
 
diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c
index 80cd28456f08..13ff0fdae03e 100644
--- a/fs/btrfs/extent-tree.c
+++ b/fs/btrfs/extent-tree.c
@@ -10708,17 +10708,9 @@ int btrfs_trim_fs(struct btrfs_root *root, struct fstrim_range *range)
 	u64 start;
 	u64 end;
 	u64 trimmed = 0;
-	u64 total_bytes = btrfs_super_total_bytes(fs_info->super_copy);
 	int ret = 0;
 
-	/*
-	 * try to trim all FS space, our block group may start from non-zero.
-	 */
-	if (range->len == total_bytes)
-		cache = btrfs_lookup_first_block_group(fs_info, range->start);
-	else
-		cache = btrfs_lookup_block_group(fs_info, range->start);
-
+	cache = btrfs_lookup_first_block_group(fs_info, range->start);
 	while (cache) {
 		if (cache->key.objectid >= (range->start + range->len)) {
 			btrfs_put_block_group(cache);
diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c
index 150d3c891815..3379490ce54d 100644
--- a/fs/btrfs/ioctl.c
+++ b/fs/btrfs/ioctl.c
@@ -378,7 +378,6 @@ static noinline int btrfs_ioctl_fitrim(struct file *file, void __user *arg)
 	struct fstrim_range range;
 	u64 minlen = ULLONG_MAX;
 	u64 num_devices = 0;
-	u64 total_bytes = btrfs_super_total_bytes(fs_info->super_copy);
 	int ret;
 
 	if (!capable(CAP_SYS_ADMIN))
@@ -402,11 +401,15 @@ static noinline int btrfs_ioctl_fitrim(struct file *file, void __user *arg)
 		return -EOPNOTSUPP;
 	if (copy_from_user(&range, arg, sizeof(range)))
 		return -EFAULT;
-	if (range.start > total_bytes ||
-	    range.len < fs_info->sb->s_blocksize)
+
+	/*
+	 * NOTE: Don't truncate the range using super->total_bytes.  Bytenr of
+	 * block group is in the logical address space, which can be any
+	 * sectorsize aligned bytenr in  the range [0, U64_MAX].
+	 */
+	if (range.len < fs_info->sb->s_blocksize)
 		return -EINVAL;
 
-	range.len = min(range.len, total_bytes - range.start);
 	range.minlen = max(range.minlen, minlen);
 	ret = btrfs_trim_fs(fs_info->tree_root, &range);
 	if (ret < 0)
diff --git a/fs/gfs2/ops_fstype.c b/fs/gfs2/ops_fstype.c
index d9178388cf48..de7143e2b361 100644
--- a/fs/gfs2/ops_fstype.c
+++ b/fs/gfs2/ops_fstype.c
@@ -71,13 +71,13 @@ static struct gfs2_sbd *init_sbd(struct super_block *sb)
 	if (!sdp)
 		return NULL;
 
-	sb->s_fs_info = sdp;
 	sdp->sd_vfs = sb;
 	sdp->sd_lkstats = alloc_percpu(struct gfs2_pcpu_lkstats);
 	if (!sdp->sd_lkstats) {
 		kfree(sdp);
 		return NULL;
 	}
+	sb->s_fs_info = sdp;
 
 	set_bit(SDF_NOJOURNALID, &sdp->sd_flags);
 	gfs2_tune_init(&sdp->sd_tune);
diff --git a/fs/namei.c b/fs/namei.c
index de57dd59d95f..40049d61ef37 100644
--- a/fs/namei.c
+++ b/fs/namei.c
@@ -869,6 +869,8 @@ static inline void put_link(struct nameidata *nd)
 
 int sysctl_protected_symlinks __read_mostly = 0;
 int sysctl_protected_hardlinks __read_mostly = 0;
+int sysctl_protected_fifos __read_mostly;
+int sysctl_protected_regular __read_mostly;
 
 /**
  * may_follow_link - Check symlink following for unsafe situations
@@ -982,6 +984,45 @@ static int may_linkat(struct path *link)
 	return -EPERM;
 }
 
+/**
+ * may_create_in_sticky - Check whether an O_CREAT open in a sticky directory
+ *			  should be allowed, or not, on files that already
+ *			  exist.
+ * @dir: the sticky parent directory
+ * @inode: the inode of the file to open
+ *
+ * Block an O_CREAT open of a FIFO (or a regular file) when:
+ *   - sysctl_protected_fifos (or sysctl_protected_regular) is enabled
+ *   - the file already exists
+ *   - we are in a sticky directory
+ *   - we don't own the file
+ *   - the owner of the directory doesn't own the file
+ *   - the directory is world writable
+ * If the sysctl_protected_fifos (or sysctl_protected_regular) is set to 2
+ * the directory doesn't have to be world writable: being group writable will
+ * be enough.
+ *
+ * Returns 0 if the open is allowed, -ve on error.
+ */
+static int may_create_in_sticky(struct dentry * const dir,
+				struct inode * const inode)
+{
+	if ((!sysctl_protected_fifos && S_ISFIFO(inode->i_mode)) ||
+	    (!sysctl_protected_regular && S_ISREG(inode->i_mode)) ||
+	    likely(!(dir->d_inode->i_mode & S_ISVTX)) ||
+	    uid_eq(inode->i_uid, dir->d_inode->i_uid) ||
+	    uid_eq(current_fsuid(), inode->i_uid))
+		return 0;
+
+	if (likely(dir->d_inode->i_mode & 0002) ||
+	    (dir->d_inode->i_mode & 0020 &&
+	     ((sysctl_protected_fifos >= 2 && S_ISFIFO(inode->i_mode)) ||
+	      (sysctl_protected_regular >= 2 && S_ISREG(inode->i_mode))))) {
+		return -EACCES;
+	}
+	return 0;
+}
+
 static __always_inline
 const char *get_link(struct nameidata *nd)
 {
@@ -3166,9 +3207,15 @@ finish_open:
 		error = -ELOOP;
 		goto out;
 	}
-	error = -EISDIR;
-	if ((open_flag & O_CREAT) && d_is_dir(nd->path.dentry))
-		goto out;
+	if (open_flag & O_CREAT) {
+		error = -EISDIR;
+		if (d_is_dir(nd->path.dentry))
+			goto out;
+		error = may_create_in_sticky(dir,
+					     d_backing_inode(nd->path.dentry));
+		if (unlikely(error))
+			goto out;
+	}
 	error = -ENOTDIR;
 	if ((nd->flags & LOOKUP_DIRECTORY) && !d_can_lookup(nd->path.dentry))
 		goto out;
diff --git a/include/linux/can/dev.h b/include/linux/can/dev.h
index 5f5270941ba0..f7178f44825b 100644
--- a/include/linux/can/dev.h
+++ b/include/linux/can/dev.h
@@ -154,6 +154,7 @@ void can_change_state(struct net_device *dev, struct can_frame *cf,
 
 void can_put_echo_skb(struct sk_buff *skb, struct net_device *dev,
 		      unsigned int idx);
+struct sk_buff *__can_get_echo_skb(struct net_device *dev, unsigned int idx, u8 *len_ptr);
 unsigned int can_get_echo_skb(struct net_device *dev, unsigned int idx);
 void can_free_echo_skb(struct net_device *dev, unsigned int idx);
 
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 240cbaee819f..13277d2715df 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -65,6 +65,8 @@ extern struct inodes_stat_t inodes_stat;
 extern int leases_enable, lease_break_time;
 extern int sysctl_protected_symlinks;
 extern int sysctl_protected_hardlinks;
+extern int sysctl_protected_fifos;
+extern int sysctl_protected_regular;
 
 struct buffer_head;
 typedef int (get_block_t)(struct inode *inode, sector_t iblock,
diff --git a/include/linux/of.h b/include/linux/of.h
index dd10626a615f..d9371c9cd88a 100644
--- a/include/linux/of.h
+++ b/include/linux/of.h
@@ -265,6 +265,8 @@ extern struct device_node *of_get_next_child(const struct device_node *node,
 extern struct device_node *of_get_next_available_child(
 	const struct device_node *node, struct device_node *prev);
 
+extern struct device_node *of_get_compatible_child(const struct device_node *parent,
+					const char *compatible);
 extern struct device_node *of_get_child_by_name(const struct device_node *node,
 					const char *name);
 
@@ -462,6 +464,12 @@ static inline bool of_have_populated_dt(void)
 	return false;
 }
 
+static inline struct device_node *of_get_compatible_child(const struct device_node *parent,
+					const char *compatible)
+{
+	return NULL;
+}
+
 static inline struct device_node *of_get_child_by_name(
 					const struct device_node *node,
 					const char *name)
diff --git a/kernel/debug/kdb/kdb_io.c b/kernel/debug/kdb/kdb_io.c
index 77777d918676..cc892a9e109d 100644
--- a/kernel/debug/kdb/kdb_io.c
+++ b/kernel/debug/kdb/kdb_io.c
@@ -215,7 +215,7 @@ static char *kdb_read(char *buffer, size_t bufsize)
 	int count;
 	int i;
 	int diag, dtab_count;
-	int key;
+	int key, buf_size, ret;
 
 
 	diag = kdbgetintenv("DTABCOUNT", &dtab_count);
@@ -335,9 +335,8 @@ poll_again:
 		else
 			p_tmp = tmpbuffer;
 		len = strlen(p_tmp);
-		count = kallsyms_symbol_complete(p_tmp,
-						 sizeof(tmpbuffer) -
-						 (p_tmp - tmpbuffer));
+		buf_size = sizeof(tmpbuffer) - (p_tmp - tmpbuffer);
+		count = kallsyms_symbol_complete(p_tmp, buf_size);
 		if (tab == 2 && count > 0) {
 			kdb_printf("\n%d symbols are found.", count);
 			if (count > dtab_count) {
@@ -349,9 +348,13 @@ poll_again:
 			}
 			kdb_printf("\n");
 			for (i = 0; i < count; i++) {
-				if (WARN_ON(!kallsyms_symbol_next(p_tmp, i)))
+				ret = kallsyms_symbol_next(p_tmp, i, buf_size);
+				if (WARN_ON(!ret))
 					break;
-				kdb_printf("%s ", p_tmp);
+				if (ret != -E2BIG)
+					kdb_printf("%s ", p_tmp);
+				else
+					kdb_printf("%s... ", p_tmp);
 				*(p_tmp + len) = '\0';
 			}
 			if (i >= dtab_count)
diff --git a/kernel/debug/kdb/kdb_private.h b/kernel/debug/kdb/kdb_private.h
index 75014d7f4568..533e04e75a9c 100644
--- a/kernel/debug/kdb/kdb_private.h
+++ b/kernel/debug/kdb/kdb_private.h
@@ -83,7 +83,7 @@ typedef struct __ksymtab {
 		unsigned long sym_start;
 		unsigned long sym_end;
 		} kdb_symtab_t;
-extern int kallsyms_symbol_next(char *prefix_name, int flag);
+extern int kallsyms_symbol_next(char *prefix_name, int flag, int buf_size);
 extern int kallsyms_symbol_complete(char *prefix_name, int max_len);
 
 /* Exported Symbols for kernel loadable modules to use. */
diff --git a/kernel/debug/kdb/kdb_support.c b/kernel/debug/kdb/kdb_support.c
index d35cc2d3a4cc..2aed4a33521b 100644
--- a/kernel/debug/kdb/kdb_support.c
+++ b/kernel/debug/kdb/kdb_support.c
@@ -221,11 +221,13 @@ int kallsyms_symbol_complete(char *prefix_name, int max_len)
  * Parameters:
  *	prefix_name	prefix of a symbol name to lookup
  *	flag	0 means search from the head, 1 means continue search.
+ *	buf_size	maximum length that can be written to prefix_name
+ *			buffer
  * Returns:
  *	1 if a symbol matches the given prefix.
  *	0 if no string found
  */
-int kallsyms_symbol_next(char *prefix_name, int flag)
+int kallsyms_symbol_next(char *prefix_name, int flag, int buf_size)
 {
 	int prefix_len = strlen(prefix_name);
 	static loff_t pos;
@@ -235,10 +237,8 @@ int kallsyms_symbol_next(char *prefix_name, int flag)
 		pos = 0;
 
 	while ((name = kdb_walk_kallsyms(&pos))) {
-		if (strncmp(name, prefix_name, prefix_len) == 0) {
-			strncpy(prefix_name, name, strlen(name)+1);
-			return 1;
-		}
+		if (!strncmp(name, prefix_name, prefix_len))
+			return strscpy(prefix_name, name, buf_size);
 	}
 	return 0;
 }
diff --git a/kernel/sched/core.c b/kernel/sched/core.c
index 4743e1f2a3d1..d0618951014b 100644
--- a/kernel/sched/core.c
+++ b/kernel/sched/core.c
@@ -3822,8 +3822,8 @@ static int __sched_setscheduler(struct task_struct *p,
 	struct rq *rq;
 	int reset_on_fork;
 
-	/* may grab non-irq protected spin_locks */
-	BUG_ON(in_interrupt());
+	/* The pi code expects interrupts enabled */
+	BUG_ON(pi && in_interrupt());
 recheck:
 	/* double check policy once rq lock held */
 	if (policy < 0) {
diff --git a/kernel/sysctl.c b/kernel/sysctl.c
index 66100d1bc3f7..7e832f9a8f42 100644
--- a/kernel/sysctl.c
+++ b/kernel/sysctl.c
@@ -1715,6 +1715,24 @@ static struct ctl_table fs_table[] = {
 		.extra1		= &zero,
 		.extra2		= &one,
 	},
+	{
+		.procname	= "protected_fifos",
+		.data		= &sysctl_protected_fifos,
+		.maxlen		= sizeof(int),
+		.mode		= 0600,
+		.proc_handler	= proc_dointvec_minmax,
+		.extra1		= &zero,
+		.extra2		= &two,
+	},
+	{
+		.procname	= "protected_regular",
+		.data		= &sysctl_protected_regular,
+		.maxlen		= sizeof(int),
+		.mode		= 0600,
+		.proc_handler	= proc_dointvec_minmax,
+		.extra1		= &zero,
+		.extra2		= &two,
+	},
 	{
 		.procname	= "suid_dumpable",
 		.data		= &suid_dumpable,
diff --git a/mm/shmem.c b/mm/shmem.c
index 8e506a45a6ef..d902b413941a 100644
--- a/mm/shmem.c
+++ b/mm/shmem.c
@@ -1818,9 +1818,7 @@ static loff_t shmem_file_llseek(struct file *file, loff_t offset, int whence)
 	mutex_lock(&inode->i_mutex);
 	/* We're holding i_mutex so we can access i_size directly */
 
-	if (offset < 0)
-		offset = -EINVAL;
-	else if (offset >= inode->i_size)
+	if (offset < 0 || offset >= inode->i_size)
 		offset = -ENXIO;
 	else {
 		start = offset >> PAGE_CACHE_SHIFT;
diff --git a/net/llc/af_llc.c b/net/llc/af_llc.c
index 83e8a295c806..c153fc2883a8 100644
--- a/net/llc/af_llc.c
+++ b/net/llc/af_llc.c
@@ -726,7 +726,6 @@ static int llc_ui_recvmsg(struct socket *sock, struct msghdr *msg, size_t len,
 	struct sk_buff *skb = NULL;
 	struct sock *sk = sock->sk;
 	struct llc_sock *llc = llc_sk(sk);
-	unsigned long cpu_flags;
 	size_t copied = 0;
 	u32 peek_seq = 0;
 	u32 *seq, skb_len;
@@ -851,9 +850,8 @@ static int llc_ui_recvmsg(struct socket *sock, struct msghdr *msg, size_t len,
 			goto copy_uaddr;
 
 		if (!(flags & MSG_PEEK)) {
-			spin_lock_irqsave(&sk->sk_receive_queue.lock, cpu_flags);
-			sk_eat_skb(sk, skb);
-			spin_unlock_irqrestore(&sk->sk_receive_queue.lock, cpu_flags);
+			skb_unlink(skb, &sk->sk_receive_queue);
+			kfree_skb(skb);
 			*seq = 0;
 		}
 
@@ -874,9 +872,8 @@ copy_uaddr:
 		llc_cmsg_rcv(msg, skb);
 
 	if (!(flags & MSG_PEEK)) {
-		spin_lock_irqsave(&sk->sk_receive_queue.lock, cpu_flags);
-		sk_eat_skb(sk, skb);
-		spin_unlock_irqrestore(&sk->sk_receive_queue.lock, cpu_flags);
+		skb_unlink(skb, &sk->sk_receive_queue);
+		kfree_skb(skb);
 		*seq = 0;
 	}
 
diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c
index 120e9ae04db3..a7967af0da82 100644
--- a/net/netfilter/nf_tables_api.c
+++ b/net/netfilter/nf_tables_api.c
@@ -3452,6 +3452,7 @@ static int nft_add_set_elem(struct nft_ctx *ctx, struct nft_set *set,
 		dreg = nft_type_to_reg(set->dtype);
 		list_for_each_entry(binding, &set->bindings, list) {
 			struct nft_ctx bind_ctx = {
+				.net	= ctx->net,
 				.afi	= ctx->afi,
 				.table	= ctx->table,
 				.chain	= (struct nft_chain *)binding->chain,
diff --git a/net/sctp/associola.c b/net/sctp/associola.c
index a40b8b0ef0d5..f085b01b6603 100644
--- a/net/sctp/associola.c
+++ b/net/sctp/associola.c
@@ -486,8 +486,9 @@ void sctp_assoc_set_primary(struct sctp_association *asoc,
 void sctp_assoc_rm_peer(struct sctp_association *asoc,
 			struct sctp_transport *peer)
 {
-	struct list_head	*pos;
-	struct sctp_transport	*transport;
+	struct sctp_transport *transport;
+	struct list_head *pos;
+	struct sctp_chunk *ch;
 
 	pr_debug("%s: association:%p addr:%pISpc\n",
 		 __func__, asoc, &peer->ipaddr.sa);
@@ -543,7 +544,6 @@ void sctp_assoc_rm_peer(struct sctp_association *asoc,
 	 */
 	if (!list_empty(&peer->transmitted)) {
 		struct sctp_transport *active = asoc->peer.active_path;
-		struct sctp_chunk *ch;
 
 		/* Reset the transport of each chunk on this list */
 		list_for_each_entry(ch, &peer->transmitted,
@@ -565,6 +565,10 @@ void sctp_assoc_rm_peer(struct sctp_association *asoc,
 				sctp_transport_hold(active);
 	}
 
+	list_for_each_entry(ch, &asoc->outqueue.out_chunk_list, list)
+		if (ch->transport == peer)
+			ch->transport = NULL;
+
 	asoc->peer.transport_count--;
 
 	sctp_transport_free(peer);
diff --git a/net/sunrpc/auth_generic.c b/net/sunrpc/auth_generic.c
index 41248b1820c7..cc27e38392ea 100644
--- a/net/sunrpc/auth_generic.c
+++ b/net/sunrpc/auth_generic.c
@@ -272,13 +272,7 @@ static bool generic_key_to_expire(struct rpc_cred *cred)
 {
 	struct auth_cred *acred = &container_of(cred, struct generic_cred,
 						gc_base)->acred;
-	bool ret;
-
-	get_rpccred(cred);
-	ret = test_bit(RPC_CRED_KEY_EXPIRE_SOON, &acred->ac_flags);
-	put_rpccred(cred);
-
-	return ret;
+	return test_bit(RPC_CRED_KEY_EXPIRE_SOON, &acred->ac_flags);
 }
 
 static const struct rpc_credops generic_credops = {




[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux