Re: [PATCH 4.14 044/100] ACPICA: AML interpreter: add region addresses in global list during initialization

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Nov 29, 2018 at 06:56:40PM +0000, Schmauss, Erik wrote:
> 
> 
> > -----Original Message-----
> > From: Greg Kroah-Hartman [mailto:gregkh@xxxxxxxxxxxxxxxxxxx]
> > Sent: Thursday, November 29, 2018 7:01 AM
> > To: Jean Delvare <jdelvare@xxxxxxx>
> > Cc: linux-kernel@xxxxxxxxxxxxxxx; stable@xxxxxxxxxxxxxxx; Jean-Marc Lenoir
> > <archlinux@xxxxxxxxxxx>; Schmauss, Erik <erik.schmauss@xxxxxxxxx>;
> > Wysocki, Rafael J <rafael.j.wysocki@xxxxxxxxx>
> > Subject: Re: [PATCH 4.14 044/100] ACPICA: AML interpreter: add region
> > addresses in global list during initialization
> > 
> > On Thu, Nov 29, 2018 at 03:45:26PM +0100, Jean Delvare wrote:
> > > Hi Greg,
> > >
> > > On Thu, 2018-11-29 at 15:12 +0100, Greg Kroah-Hartman wrote:
> > > > 4.14-stable review patch.  If anyone has any objections, please let me
> > know.
> > > >
> > > > ------------------
> > > >
> > > > From: Erik Schmauss <erik.schmauss@xxxxxxxxx>
> > > >
> > > > commit 4abb951b73ff0a8a979113ef185651aa3c8da19b upstream.
> > > >
> > > > The table load process omitted adding the operation region address
> > > > range to the global list. This omission is problematic because the
> > > > OS queries the global list to check for address range conflicts
> > > > before deciding which drivers to load. This commit may result in
> > > > warning messages that look like the following:
> > > >
> > > > [    7.871761] ACPI Warning: system_IO range 0x00000428-0x0000042F
> > conflicts with op_region 0x00000400-0x0000047F (\PMIO)
> > (20180531/utaddress-213)
> > > > [    7.871769] ACPI: If an ACPI driver is available for this device, you should
> > use it instead of the native driver
> > > >
> > > > However, these messages do not signify regressions. It is a result
> > > > of properly adding address ranges within the global address list.
> > > >
> > > > Link: https://bugzilla.kernel.org/show_bug.cgi?id=200011
> > > > Tested-by: Jean-Marc Lenoir <archlinux@xxxxxxxxxxx>
> > > > Signed-off-by: Erik Schmauss <erik.schmauss@xxxxxxxxx>
> > > > Cc: All applicable <stable@xxxxxxxxxxxxxxx>
> > > > Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@xxxxxxxxx>
> > > > Cc: Jean Delvare <jdelvare@xxxxxxx>
> > > > Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
> > >
> > > I'm confused. While we were discussing the regression, Erik said that
> > > this is fixing commit 5a8361f7ecceaed64b4064000d16cb703462be49, which
> > > went upstream in v4.17. So how can the fix be needed in any kernel
> > > older than v4.17? Erik, did I understand you incorrectly?
> > 
> Hi Greg,
> 
> > The patch says "All applicable", and I assumed that meant, "as long as it
> > applies."
> >
> > Erik, should I drop this from 4.14.y?
> 
> This should only apply to 4.17 or later. I unintentionally put all applicable so
> please drop this for all 4.16 or earlier. I've learned my lesson and I'll put the
> correct tags from now on :-)

Ok, now dropped from 4.14, thanks.

greg k-h



[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux