3.18-stable review patch. If anyone has any objections, please let me know. ------------------ [ Upstream commit 4220f7db1e424f2a086ad41217b5770cc9f003a9 ] The irq_out urb is dead after suspend/ resume on my x360 wr pad. (also reproduced by Zachary Lund [0]) Work around this by implementing suspend, resume, and reset_resume callbacks and properly shutting down URBs on suspend and restarting them on resume. [0]: https://github.com/paroj/xpad/issues/6 Signed-off-by: Pavel Rojtberg <rojtberg@xxxxxxxxx> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx> Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> --- drivers/input/joystick/xpad.c | 175 ++++++++++++++++++++++++++-------- 1 file changed, 137 insertions(+), 38 deletions(-) diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c index 68197239e327..41db1f2ed122 100644 --- a/drivers/input/joystick/xpad.c +++ b/drivers/input/joystick/xpad.c @@ -82,6 +82,7 @@ #include <linux/stat.h> #include <linux/module.h> #include <linux/usb/input.h> +#include <linux/usb/quirks.h> #define DRIVER_AUTHOR "Marko Friedemann <mfr@xxxxxxxxxxxxxxx>" #define DRIVER_DESC "X-Box pad driver" @@ -348,9 +349,10 @@ struct usb_xpad { dma_addr_t idata_dma; struct urb *irq_out; /* urb for interrupt out report */ + struct usb_anchor irq_out_anchor; bool irq_out_active; /* we must not use an active URB */ - unsigned char *odata; /* output data */ u8 odata_serial; /* serial number for xbox one protocol */ + unsigned char *odata; /* output data */ dma_addr_t odata_dma; spinlock_t odata_lock; @@ -766,11 +768,13 @@ static int xpad_try_sending_next_out_packet(struct usb_xpad *xpad) int error; if (!xpad->irq_out_active && xpad_prepare_next_out_packet(xpad)) { + usb_anchor_urb(xpad->irq_out, &xpad->irq_out_anchor); error = usb_submit_urb(xpad->irq_out, GFP_ATOMIC); if (error) { dev_err(&xpad->intf->dev, "%s - usb_submit_urb failed with result %d\n", __func__, error); + usb_unanchor_urb(xpad->irq_out); return -EIO; } @@ -813,11 +817,13 @@ static void xpad_irq_out(struct urb *urb) } if (xpad->irq_out_active) { + usb_anchor_urb(urb, &xpad->irq_out_anchor); error = usb_submit_urb(urb, GFP_ATOMIC); if (error) { dev_err(dev, "%s - usb_submit_urb failed with result %d\n", __func__, error); + usb_unanchor_urb(urb); xpad->irq_out_active = false; } } @@ -834,6 +840,8 @@ static int xpad_init_output(struct usb_interface *intf, struct usb_xpad *xpad) if (xpad->xtype == XTYPE_UNKNOWN) return 0; + init_usb_anchor(&xpad->irq_out_anchor); + xpad->odata = usb_alloc_coherent(xpad->udev, XPAD_PKT_LEN, GFP_KERNEL, &xpad->odata_dma); if (!xpad->odata) { @@ -868,8 +876,14 @@ static int xpad_init_output(struct usb_interface *intf, struct usb_xpad *xpad) static void xpad_stop_output(struct usb_xpad *xpad) { - if (xpad->xtype != XTYPE_UNKNOWN) - usb_kill_urb(xpad->irq_out); + if (xpad->xtype != XTYPE_UNKNOWN) { + if (!usb_wait_anchor_empty_timeout(&xpad->irq_out_anchor, + 5000)) { + dev_warn(&xpad->intf->dev, + "timed out waiting for output URB to complete, killing\n"); + usb_kill_anchored_urbs(&xpad->irq_out_anchor); + } + } } static void xpad_deinit_output(struct usb_xpad *xpad) @@ -1198,32 +1212,73 @@ static void xpad_led_disconnect(struct usb_xpad *xpad) { } static void xpad_identify_controller(struct usb_xpad *xpad) { } #endif -static int xpad_open(struct input_dev *dev) +static int xpad_start_input(struct usb_xpad *xpad) { - struct usb_xpad *xpad = input_get_drvdata(dev); - - /* URB was submitted in probe */ - if (xpad->xtype == XTYPE_XBOX360W) - return 0; + int error; - xpad->irq_in->dev = xpad->udev; if (usb_submit_urb(xpad->irq_in, GFP_KERNEL)) return -EIO; - if (xpad->xtype == XTYPE_XBOXONE) - return xpad_start_xbox_one(xpad); + if (xpad->xtype == XTYPE_XBOXONE) { + error = xpad_start_xbox_one(xpad); + if (error) { + usb_kill_urb(xpad->irq_in); + return error; + } + } return 0; } -static void xpad_close(struct input_dev *dev) +static void xpad_stop_input(struct usb_xpad *xpad) { - struct usb_xpad *xpad = input_get_drvdata(dev); + usb_kill_urb(xpad->irq_in); +} + +static int xpad360w_start_input(struct usb_xpad *xpad) +{ + int error; + + error = usb_submit_urb(xpad->irq_in, GFP_KERNEL); + if (error) + return -EIO; - if (xpad->xtype != XTYPE_XBOX360W) + /* + * Send presence packet. + * This will force the controller to resend connection packets. + * This is useful in the case we activate the module after the + * adapter has been plugged in, as it won't automatically + * send us info about the controllers. + */ + error = xpad_inquiry_pad_presence(xpad); + if (error) { usb_kill_urb(xpad->irq_in); + return error; + } - xpad_stop_output(xpad); + return 0; +} + +static void xpad360w_stop_input(struct usb_xpad *xpad) +{ + usb_kill_urb(xpad->irq_in); + + /* Make sure we are done with presence work if it was scheduled */ + flush_work(&xpad->work); +} + +static int xpad_open(struct input_dev *dev) +{ + struct usb_xpad *xpad = input_get_drvdata(dev); + + return xpad_start_input(xpad); +} + +static void xpad_close(struct input_dev *dev) +{ + struct usb_xpad *xpad = input_get_drvdata(dev); + + xpad_stop_input(xpad); } static void xpad_set_up_abs(struct input_dev *input_dev, signed short abs) @@ -1278,8 +1333,10 @@ static int xpad_init_input(struct usb_xpad *xpad) input_set_drvdata(input_dev, xpad); - input_dev->open = xpad_open; - input_dev->close = xpad_close; + if (xpad->xtype != XTYPE_XBOX360W) { + input_dev->open = xpad_open; + input_dev->close = xpad_close; + } __set_bit(EV_KEY, input_dev->evbit); @@ -1450,21 +1507,17 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id * exactly the message that a controller has arrived that * we're waiting for. */ - xpad->irq_in->dev = xpad->udev; - error = usb_submit_urb(xpad->irq_in, GFP_KERNEL); + error = xpad360w_start_input(xpad); if (error) goto err_deinit_output; - /* - * Send presence packet. - * This will force the controller to resend connection packets. - * This is useful in the case we activate the module after the - * adapter has been plugged in, as it won't automatically - * send us info about the controllers. + * Wireless controllers require RESET_RESUME to work properly + * after suspend. Ideally this quirk should be in usb core + * quirk list, but we have too many vendors producing these + * controllers and we'd need to maintain 2 identical lists + * here in this driver and in usb core. */ - error = xpad_inquiry_pad_presence(xpad); - if (error) - goto err_kill_in_urb; + udev->quirks |= USB_QUIRK_RESET_RESUME; } else { error = xpad_init_input(xpad); if (error) @@ -1472,8 +1525,6 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id } return 0; -err_kill_in_urb: - usb_kill_urb(xpad->irq_in); err_deinit_output: xpad_deinit_output(xpad); err_free_in_urb: @@ -1483,35 +1534,83 @@ err_free_idata: err_free_mem: kfree(xpad); return error; - } static void xpad_disconnect(struct usb_interface *intf) { - struct usb_xpad *xpad = usb_get_intfdata (intf); + struct usb_xpad *xpad = usb_get_intfdata(intf); if (xpad->xtype == XTYPE_XBOX360W) - usb_kill_urb(xpad->irq_in); - - cancel_work_sync(&xpad->work); + xpad360w_stop_input(xpad); xpad_deinit_input(xpad); + /* + * Now that both input device and LED device are gone we can + * stop output URB. + */ + xpad_stop_output(xpad); + + xpad_deinit_output(xpad); + usb_free_urb(xpad->irq_in); usb_free_coherent(xpad->udev, XPAD_PKT_LEN, xpad->idata, xpad->idata_dma); - xpad_deinit_output(xpad); - kfree(xpad); usb_set_intfdata(intf, NULL); } +static int xpad_suspend(struct usb_interface *intf, pm_message_t message) +{ + struct usb_xpad *xpad = usb_get_intfdata(intf); + struct input_dev *input = xpad->dev; + + if (xpad->xtype == XTYPE_XBOX360W) { + /* + * Wireless controllers always listen to input so + * they are notified when controller shows up + * or goes away. + */ + xpad360w_stop_input(xpad); + } else { + mutex_lock(&input->mutex); + if (input->users) + xpad_stop_input(xpad); + mutex_unlock(&input->mutex); + } + + xpad_stop_output(xpad); + + return 0; +} + +static int xpad_resume(struct usb_interface *intf) +{ + struct usb_xpad *xpad = usb_get_intfdata(intf); + struct input_dev *input = xpad->dev; + int retval = 0; + + if (xpad->xtype == XTYPE_XBOX360W) { + retval = xpad360w_start_input(xpad); + } else { + mutex_lock(&input->mutex); + if (input->users) + retval = xpad_start_input(xpad); + mutex_unlock(&input->mutex); + } + + return retval; +} + static struct usb_driver xpad_driver = { .name = "xpad", .probe = xpad_probe, .disconnect = xpad_disconnect, + .suspend = xpad_suspend, + .resume = xpad_resume, + .reset_resume = xpad_resume, .id_table = xpad_table, }; -- 2.17.1
