4.19-stable review patch. If anyone has any objections, please let me know. ------------------ From: Dennis Wassenberg <dennis.wassenberg@xxxxxxxxxxx> commit 22454b79e6de05fa61a2a72d00d2eed798abbb75 upstream. This will clear the USB_PORT_FEAT_C_CONNECTION bit in case of a hub port reset only if a device is was attached to the hub port before resetting the hub port. Using a Lenovo T480s attached to the ultra dock it was not possible to detect some usb-c devices at the dock usb-c ports because the hub_port_reset code will clear the USB_PORT_FEAT_C_CONNECTION bit after the actual hub port reset. Using this device combo the USB_PORT_FEAT_C_CONNECTION bit was set between the actual hub port reset and the clear of the USB_PORT_FEAT_C_CONNECTION bit. This ends up with clearing the USB_PORT_FEAT_C_CONNECTION bit after the new device was attached such that it was not detected. This patch will not clear the USB_PORT_FEAT_C_CONNECTION bit if there is currently no device attached to the port before the hub port reset. This will avoid clearing the connection bit for new attached devices. Signed-off-by: Dennis Wassenberg <dennis.wassenberg@xxxxxxxxxxx> Acked-by: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx> Cc: stable <stable@xxxxxxxxxxxxxxx> Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- drivers/usb/core/hub.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -2847,7 +2847,9 @@ static int hub_port_reset(struct usb_hub USB_PORT_FEAT_C_BH_PORT_RESET); usb_clear_port_feature(hub->hdev, port1, USB_PORT_FEAT_C_PORT_LINK_STATE); - usb_clear_port_feature(hub->hdev, port1, + + if (udev) + usb_clear_port_feature(hub->hdev, port1, USB_PORT_FEAT_C_CONNECTION); /*
