[PATCH 4.9 85/92] lan78xx: Read MAC address from DT if present

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Phil Elwell <phil@xxxxxxxxxxxxxxx>

commit 760db29bdc97b73ff60b091315ad787b1deb5cf5 upstream.

There is a standard mechanism for locating and using a MAC address from
the Device Tree. Use this facility in the lan78xx driver to support
applications without programmed EEPROM or OTP. At the same time,
regularise the handling of the different address sources.

Signed-off-by: Phil Elwell <phil@xxxxxxxxxxxxxxx>
Signed-off-by: David S. Miller <davem@xxxxxxxxxxxxx>
Tested-by: Paolo Pisati <p.pisati@xxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>

---
 drivers/net/usb/lan78xx.c |   42 ++++++++++++++++++++----------------------
 1 file changed, 20 insertions(+), 22 deletions(-)

--- a/drivers/net/usb/lan78xx.c
+++ b/drivers/net/usb/lan78xx.c
@@ -31,6 +31,7 @@
 #include <linux/mdio.h>
 #include <net/ip6_checksum.h>
 #include <linux/microchipphy.h>
+#include <linux/of_net.h>
 #include "lan78xx.h"
 
 #define DRIVER_AUTHOR	"WOOJUNG HUH <woojung.huh@xxxxxxxxxxxxx>"
@@ -1644,34 +1645,31 @@ static void lan78xx_init_mac_address(str
 	addr[5] = (addr_hi >> 8) & 0xFF;
 
 	if (!is_valid_ether_addr(addr)) {
-		/* reading mac address from EEPROM or OTP */
-		if ((lan78xx_read_eeprom(dev, EEPROM_MAC_OFFSET, ETH_ALEN,
-					 addr) == 0) ||
-		    (lan78xx_read_otp(dev, EEPROM_MAC_OFFSET, ETH_ALEN,
-				      addr) == 0)) {
-			if (is_valid_ether_addr(addr)) {
-				/* eeprom values are valid so use them */
-				netif_dbg(dev, ifup, dev->net,
-					  "MAC address read from EEPROM");
-			} else {
-				/* generate random MAC */
-				random_ether_addr(addr);
-				netif_dbg(dev, ifup, dev->net,
-					  "MAC address set to random addr");
-			}
-
-			addr_lo = addr[0] | (addr[1] << 8) |
-				  (addr[2] << 16) | (addr[3] << 24);
-			addr_hi = addr[4] | (addr[5] << 8);
-
-			ret = lan78xx_write_reg(dev, RX_ADDRL, addr_lo);
-			ret = lan78xx_write_reg(dev, RX_ADDRH, addr_hi);
+		if (!eth_platform_get_mac_address(&dev->udev->dev, addr)) {
+			/* valid address present in Device Tree */
+			netif_dbg(dev, ifup, dev->net,
+				  "MAC address read from Device Tree");
+		} else if (((lan78xx_read_eeprom(dev, EEPROM_MAC_OFFSET,
+						 ETH_ALEN, addr) == 0) ||
+			    (lan78xx_read_otp(dev, EEPROM_MAC_OFFSET,
+					      ETH_ALEN, addr) == 0)) &&
+			   is_valid_ether_addr(addr)) {
+			/* eeprom values are valid so use them */
+			netif_dbg(dev, ifup, dev->net,
+				  "MAC address read from EEPROM");
 		} else {
 			/* generate random MAC */
 			random_ether_addr(addr);
 			netif_dbg(dev, ifup, dev->net,
 				  "MAC address set to random addr");
 		}
+
+		addr_lo = addr[0] | (addr[1] << 8) |
+			  (addr[2] << 16) | (addr[3] << 24);
+		addr_hi = addr[4] | (addr[5] << 8);
+
+		ret = lan78xx_write_reg(dev, RX_ADDRL, addr_lo);
+		ret = lan78xx_write_reg(dev, RX_ADDRH, addr_hi);
 	}
 
 	ret = lan78xx_write_reg(dev, MAF_LO(0), addr_lo);





[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux