3.12-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mauro Carvalho Chehab <m.chehab@xxxxxxxxxxx>
commit 37ebaf6891ee81687bb558e8375c0712d8264ed8 upstream.
Dynamic static allocation is evil, as Kernel stack is too low, and
compilation complains about it on some archs:
drivers/media/dvb-frontends/af9013.c:77:1: warning: 'af9013_wr_regs_i2c' uses dynamic stack allocation [enabled by default]
drivers/media/dvb-frontends/af9033.c:188:1: warning: 'af9033_wr_reg_val_tab' uses dynamic stack allocation [enabled by default]
drivers/media/dvb-frontends/af9033.c:68:1: warning: 'af9033_wr_regs' uses dynamic stack allocation [enabled by default]
drivers/media/dvb-frontends/bcm3510.c:230:1: warning: 'bcm3510_do_hab_cmd' uses dynamic stack allocation [enabled by default]
drivers/media/dvb-frontends/cxd2820r_core.c:84:1: warning: 'cxd2820r_rd_regs_i2c.isra.1' uses dynamic stack allocation [enabled by default]
drivers/media/dvb-frontends/rtl2830.c:56:1: warning: 'rtl2830_wr' uses dynamic stack allocation [enabled by default]
drivers/media/dvb-frontends/rtl2832.c:187:1: warning: 'rtl2832_wr' uses dynamic stack allocation [enabled by default]
drivers/media/dvb-frontends/tda10071.c:52:1: warning: 'tda10071_wr_regs' uses dynamic stack allocation [enabled by default]
drivers/media/dvb-frontends/tda10071.c:84:1: warning: 'tda10071_rd_regs' uses dynamic stack allocation [enabled by default]
Instead, let's enforce a limit for the buffer. Considering that I2C
transfers are generally limited, and that devices used on USB has a
max data length of 64 bytes for the control URBs.
So, it seem safe to use 64 bytes as the hard limit for all those devices.
On most cases, the limit is a way lower than that, but this limit
is small enough to not affect the Kernel stack, and it is a no brain
limit, as using smaller ones would require to either carefully each
driver or to take a look on each datasheet.
Signed-off-by: Mauro Carvalho Chehab <m.chehab@xxxxxxxxxxx>
Reviewed-by: Hans Verkuil <hans.verkuil@xxxxxxxxx>
Reviewed-by: Antti Palosaari <crope@xxxxxx>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@xxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/media/dvb-frontends/af9013.c | 14 ++++++++++++--
drivers/media/dvb-frontends/af9033.c | 23 ++++++++++++++++++++---
drivers/media/dvb-frontends/cxd2820r_core.c | 21 +++++++++++++++++++--
drivers/media/dvb-frontends/rtl2830.c | 14 ++++++++++++--
drivers/media/dvb-frontends/rtl2832.c | 14 ++++++++++++--
drivers/media/dvb-frontends/tda10071.c | 25 +++++++++++++++++++++----
6 files changed, 96 insertions(+), 15 deletions(-)
--- a/drivers/media/dvb-frontends/af9013.c
+++ b/drivers/media/dvb-frontends/af9013.c
@@ -24,6 +24,9 @@
#include "af9013_priv.h"
+/* Max transfer size done by I2C transfer functions */
+#define MAX_XFER_SIZE 64
+
struct af9013_state {
struct i2c_adapter *i2c;
struct dvb_frontend fe;
@@ -50,16 +53,23 @@ static int af9013_wr_regs_i2c(struct af9
const u8 *val, int len)
{
int ret;
- u8 buf[3+len];
+ u8 buf[MAX_XFER_SIZE];
struct i2c_msg msg[1] = {
{
.addr = priv->config.i2c_addr,
.flags = 0,
- .len = sizeof(buf),
+ .len = 3 + len,
.buf = buf,
}
};
+ if (3 + len > sizeof(buf)) {
+ dev_warn(&priv->i2c->dev,
+ "%s: i2c wr reg=%04x: len=%d is too big!\n",
+ KBUILD_MODNAME, reg, len);
+ return -EINVAL;
+ }
+
buf[0] = (reg >> 8) & 0xff;
buf[1] = (reg >> 0) & 0xff;
buf[2] = mbox;
--- a/drivers/media/dvb-frontends/af9033.c
+++ b/drivers/media/dvb-frontends/af9033.c
@@ -21,6 +21,9 @@
#include "af9033_priv.h"
+/* Max transfer size done by I2C transfer functions */
+#define MAX_XFER_SIZE 64
+
struct af9033_state {
struct i2c_adapter *i2c;
struct dvb_frontend fe;
@@ -40,16 +43,23 @@ static int af9033_wr_regs(struct af9033_
int len)
{
int ret;
- u8 buf[3 + len];
+ u8 buf[MAX_XFER_SIZE];
struct i2c_msg msg[1] = {
{
.addr = state->cfg.i2c_addr,
.flags = 0,
- .len = sizeof(buf),
+ .len = 3 + len,
.buf = buf,
}
};
+ if (3 + len > sizeof(buf)) {
+ dev_warn(&state->i2c->dev,
+ "%s: i2c wr reg=%04x: len=%d is too big!\n",
+ KBUILD_MODNAME, reg, len);
+ return -EINVAL;
+ }
+
buf[0] = (reg >> 16) & 0xff;
buf[1] = (reg >> 8) & 0xff;
buf[2] = (reg >> 0) & 0xff;
@@ -161,7 +171,14 @@ static int af9033_wr_reg_val_tab(struct
const struct reg_val *tab, int tab_len)
{
int ret, i, j;
- u8 buf[tab_len];
+ u8 buf[MAX_XFER_SIZE];
+
+ if (tab_len > sizeof(buf)) {
+ dev_warn(&state->i2c->dev,
+ "%s: i2c wr len=%d is too big!\n",
+ KBUILD_MODNAME, tab_len);
+ return -EINVAL;
+ }
dev_dbg(&state->i2c->dev, "%s: tab_len=%d\n", __func__, tab_len);
--- a/drivers/media/dvb-frontends/cxd2820r_core.c
+++ b/drivers/media/dvb-frontends/cxd2820r_core.c
@@ -21,12 +21,15 @@
#include "cxd2820r_priv.h"
+/* Max transfer size done by I2C transfer functions */
+#define MAX_XFER_SIZE 64
+
/* write multiple registers */
static int cxd2820r_wr_regs_i2c(struct cxd2820r_priv *priv, u8 i2c, u8 reg,
u8 *val, int len)
{
int ret;
- u8 buf[len+1];
+ u8 buf[MAX_XFER_SIZE];
struct i2c_msg msg[1] = {
{
.addr = i2c,
@@ -36,6 +39,13 @@ static int cxd2820r_wr_regs_i2c(struct c
}
};
+ if (1 + len > sizeof(buf)) {
+ dev_warn(&priv->i2c->dev,
+ "%s: i2c wr reg=%04x: len=%d is too big!\n",
+ KBUILD_MODNAME, reg, len);
+ return -EINVAL;
+ }
+
buf[0] = reg;
memcpy(&buf[1], val, len);
@@ -55,7 +65,7 @@ static int cxd2820r_rd_regs_i2c(struct c
u8 *val, int len)
{
int ret;
- u8 buf[len];
+ u8 buf[MAX_XFER_SIZE];
struct i2c_msg msg[2] = {
{
.addr = i2c,
@@ -70,6 +80,13 @@ static int cxd2820r_rd_regs_i2c(struct c
}
};
+ if (len > sizeof(buf)) {
+ dev_warn(&priv->i2c->dev,
+ "%s: i2c wr reg=%04x: len=%d is too big!\n",
+ KBUILD_MODNAME, reg, len);
+ return -EINVAL;
+ }
+
ret = i2c_transfer(priv->i2c, msg, 2);
if (ret == 2) {
memcpy(val, buf, len);
--- a/drivers/media/dvb-frontends/rtl2830.c
+++ b/drivers/media/dvb-frontends/rtl2830.c
@@ -27,20 +27,30 @@
#include "rtl2830_priv.h"
+/* Max transfer size done by I2C transfer functions */
+#define MAX_XFER_SIZE 64
+
/* write multiple hardware registers */
static int rtl2830_wr(struct rtl2830_priv *priv, u8 reg, const u8 *val, int len)
{
int ret;
- u8 buf[1+len];
+ u8 buf[MAX_XFER_SIZE];
struct i2c_msg msg[1] = {
{
.addr = priv->cfg.i2c_addr,
.flags = 0,
- .len = 1+len,
+ .len = 1 + len,
.buf = buf,
}
};
+ if (1 + len > sizeof(buf)) {
+ dev_warn(&priv->i2c->dev,
+ "%s: i2c wr reg=%04x: len=%d is too big!\n",
+ KBUILD_MODNAME, reg, len);
+ return -EINVAL;
+ }
+
buf[0] = reg;
memcpy(&buf[1], val, len);
--- a/drivers/media/dvb-frontends/rtl2832.c
+++ b/drivers/media/dvb-frontends/rtl2832.c
@@ -22,6 +22,9 @@
#include "dvb_math.h"
#include <linux/bitops.h>
+/* Max transfer size done by I2C transfer functions */
+#define MAX_XFER_SIZE 64
+
int rtl2832_debug;
module_param_named(debug, rtl2832_debug, int, 0644);
MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
@@ -162,16 +165,23 @@ static const struct rtl2832_reg_entry re
static int rtl2832_wr(struct rtl2832_priv *priv, u8 reg, u8 *val, int len)
{
int ret;
- u8 buf[1+len];
+ u8 buf[MAX_XFER_SIZE];
struct i2c_msg msg[1] = {
{
.addr = priv->cfg.i2c_addr,
.flags = 0,
- .len = 1+len,
+ .len = 1 + len,
.buf = buf,
}
};
+ if (1 + len > sizeof(buf)) {
+ dev_warn(&priv->i2c->dev,
+ "%s: i2c wr reg=%04x: len=%d is too big!\n",
+ KBUILD_MODNAME, reg, len);
+ return -EINVAL;
+ }
+
buf[0] = reg;
memcpy(&buf[1], val, len);
--- a/drivers/media/dvb-frontends/tda10071.c
+++ b/drivers/media/dvb-frontends/tda10071.c
@@ -20,6 +20,9 @@
#include "tda10071_priv.h"
+/* Max transfer size done by I2C transfer functions */
+#define MAX_XFER_SIZE 64
+
static struct dvb_frontend_ops tda10071_ops;
/* write multiple registers */
@@ -27,16 +30,23 @@ static int tda10071_wr_regs(struct tda10
int len)
{
int ret;
- u8 buf[len+1];
+ u8 buf[MAX_XFER_SIZE];
struct i2c_msg msg[1] = {
{
.addr = priv->cfg.demod_i2c_addr,
.flags = 0,
- .len = sizeof(buf),
+ .len = 1 + len,
.buf = buf,
}
};
+ if (1 + len > sizeof(buf)) {
+ dev_warn(&priv->i2c->dev,
+ "%s: i2c wr reg=%04x: len=%d is too big!\n",
+ KBUILD_MODNAME, reg, len);
+ return -EINVAL;
+ }
+
buf[0] = reg;
memcpy(&buf[1], val, len);
@@ -56,7 +66,7 @@ static int tda10071_rd_regs(struct tda10
int len)
{
int ret;
- u8 buf[len];
+ u8 buf[MAX_XFER_SIZE];
struct i2c_msg msg[2] = {
{
.addr = priv->cfg.demod_i2c_addr,
@@ -66,11 +76,18 @@ static int tda10071_rd_regs(struct tda10
}, {
.addr = priv->cfg.demod_i2c_addr,
.flags = I2C_M_RD,
- .len = sizeof(buf),
+ .len = len,
.buf = buf,
}
};
+ if (len > sizeof(buf)) {
+ dev_warn(&priv->i2c->dev,
+ "%s: i2c wr reg=%04x: len=%d is too big!\n",
+ KBUILD_MODNAME, reg, len);
+ return -EINVAL;
+ }
+
ret = i2c_transfer(priv->i2c, msg, 2);
if (ret == 2) {
memcpy(val, buf, len);
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html