From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
Since commit eb3744a2dd01 ("gpio: davinci: Do not assume continuous
IRQ numbering") the davinci GPIO driver fails to probe if we boot
in legacy mode from any of the board files. Since the driver now
expects every interrupt to be defined as a separate resource, split
the definition in devices-da8xx.c instead of having a single continuous
interrupt range.
Fixes: eb3744a2dd01 ("gpio: davinci: Do not assume continuous IRQ numbering")
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
---
arch/arm/mach-davinci/devices-da8xx.c | 42 ++++++++++++++++++++++++++-
1 file changed, 41 insertions(+), 1 deletion(-)
diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c
index 1fd3619f6a09..8c4ae9866e3c 100644
--- a/arch/arm/mach-davinci/devices-da8xx.c
+++ b/arch/arm/mach-davinci/devices-da8xx.c
@@ -701,9 +701,49 @@ static struct resource da8xx_gpio_resources[] = {
},
{ /* interrupt */
.start = IRQ_DA8XX_GPIO0,
- .end = IRQ_DA8XX_GPIO8,
+ .end = IRQ_DA8XX_GPIO0,
.flags = IORESOURCE_IRQ,
},
+ {
+ .start = IRQ_DA8XX_GPIO1,
+ .end = IRQ_DA8XX_GPIO1,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = IRQ_DA8XX_GPIO2,
+ .end = IRQ_DA8XX_GPIO2,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = IRQ_DA8XX_GPIO3,
+ .end = IRQ_DA8XX_GPIO3,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = IRQ_DA8XX_GPIO4,
+ .end = IRQ_DA8XX_GPIO4,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = IRQ_DA8XX_GPIO5,
+ .end = IRQ_DA8XX_GPIO5,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = IRQ_DA8XX_GPIO6,
+ .end = IRQ_DA8XX_GPIO6,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = IRQ_DA8XX_GPIO7,
+ .end = IRQ_DA8XX_GPIO7,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = IRQ_DA8XX_GPIO8,
+ .end = IRQ_DA8XX_GPIO8,
+ .flags = IORESOURCE_IRQ,
+ }
};
static struct platform_device da8xx_gpio_device = {
--
2.19.1
