This is a note to let you know that I've just added the patch titled media: tuners: Don't use dynamic static allocation to the 3.10-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary The filename of the patch is: media-tuners-don-t-use-dynamic-static-allocation.patch and it can be found in the queue-3.10 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable@xxxxxxxxxxxxxxx> know about it. >From f1baab870f6e93b668af7b34d6f6ba49f1b0e982 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab <m.chehab@xxxxxxxxxxx> Date: Sat, 2 Nov 2013 06:07:42 -0300 Subject: media: tuners: Don't use dynamic static allocation From: Mauro Carvalho Chehab <m.chehab@xxxxxxxxxxx> commit f1baab870f6e93b668af7b34d6f6ba49f1b0e982 upstream. Dynamic static allocation is evil, as Kernel stack is too low, and compilation complains about it on some archs: drivers/media/tuners/e4000.c:50:1: warning: 'e4000_wr_regs' uses dynamic stack allocation [enabled by default] drivers/media/tuners/e4000.c:83:1: warning: 'e4000_rd_regs' uses dynamic stack allocation [enabled by default] drivers/media/tuners/fc2580.c:66:1: warning: 'fc2580_wr_regs.constprop.1' uses dynamic stack allocation [enabled by default] drivers/media/tuners/fc2580.c:98:1: warning: 'fc2580_rd_regs.constprop.0' uses dynamic stack allocation [enabled by default] drivers/media/tuners/tda18212.c:57:1: warning: 'tda18212_wr_regs' uses dynamic stack allocation [enabled by default] drivers/media/tuners/tda18212.c:90:1: warning: 'tda18212_rd_regs.constprop.0' uses dynamic stack allocation [enabled by default] drivers/media/tuners/tda18218.c:60:1: warning: 'tda18218_wr_regs' uses dynamic stack allocation [enabled by default] drivers/media/tuners/tda18218.c:92:1: warning: 'tda18218_rd_regs.constprop.0' uses dynamic stack allocation [enabled by default] Instead, let's enforce a limit for the buffer. Considering that I2C transfers are generally limited, and that devices used on USB has a max data length of 64 bytes for the control URBs. So, it seem safe to use 64 bytes as the hard limit for all those devices. On most cases, the limit is a way lower than that, but this limit is small enough to not affect the Kernel stack, and it is a no brain limit, as using smaller ones would require to either carefully each driver or to take a look on each datasheet. Signed-off-by: Mauro Carvalho Chehab <m.chehab@xxxxxxxxxxx> Reviewed-by: Hans Verkuil <hans.verkuil@xxxxxxxxx> Reviewed-by: Antti Palosaari <crope@xxxxxx> Signed-off-by: Mauro Carvalho Chehab <m.chehab@xxxxxxxxxxx> Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- drivers/media/tuners/e4000.c | 25 +++++++++++++++++++++---- drivers/media/tuners/fc2580.c | 25 +++++++++++++++++++++---- drivers/media/tuners/tda18212.c | 25 +++++++++++++++++++++---- drivers/media/tuners/tda18218.c | 23 ++++++++++++++++++++--- 4 files changed, 83 insertions(+), 15 deletions(-) --- a/drivers/media/tuners/e4000.c +++ b/drivers/media/tuners/e4000.c @@ -20,20 +20,30 @@ #include "e4000_priv.h" +/* Max transfer size done by I2C transfer functions */ +#define MAX_XFER_SIZE 64 + /* write multiple registers */ static int e4000_wr_regs(struct e4000_priv *priv, u8 reg, u8 *val, int len) { int ret; - u8 buf[1 + len]; + u8 buf[MAX_XFER_SIZE]; struct i2c_msg msg[1] = { { .addr = priv->cfg->i2c_addr, .flags = 0, - .len = sizeof(buf), + .len = 1 + len, .buf = buf, } }; + if (1 + len > sizeof(buf)) { + dev_warn(&priv->i2c->dev, + "%s: i2c wr reg=%04x: len=%d is too big!\n", + KBUILD_MODNAME, reg, len); + return -EINVAL; + } + buf[0] = reg; memcpy(&buf[1], val, len); @@ -52,7 +62,7 @@ static int e4000_wr_regs(struct e4000_pr static int e4000_rd_regs(struct e4000_priv *priv, u8 reg, u8 *val, int len) { int ret; - u8 buf[len]; + u8 buf[MAX_XFER_SIZE]; struct i2c_msg msg[2] = { { .addr = priv->cfg->i2c_addr, @@ -62,11 +72,18 @@ static int e4000_rd_regs(struct e4000_pr }, { .addr = priv->cfg->i2c_addr, .flags = I2C_M_RD, - .len = sizeof(buf), + .len = len, .buf = buf, } }; + if (len > sizeof(buf)) { + dev_warn(&priv->i2c->dev, + "%s: i2c rd reg=%04x: len=%d is too big!\n", + KBUILD_MODNAME, reg, len); + return -EINVAL; + } + ret = i2c_transfer(priv->i2c, msg, 2); if (ret == 2) { memcpy(val, buf, len); --- a/drivers/media/tuners/fc2580.c +++ b/drivers/media/tuners/fc2580.c @@ -20,6 +20,9 @@ #include "fc2580_priv.h" +/* Max transfer size done by I2C transfer functions */ +#define MAX_XFER_SIZE 64 + /* * TODO: * I2C write and read works only for one single register. Multiple registers @@ -41,16 +44,23 @@ static int fc2580_wr_regs(struct fc2580_priv *priv, u8 reg, u8 *val, int len) { int ret; - u8 buf[1 + len]; + u8 buf[MAX_XFER_SIZE]; struct i2c_msg msg[1] = { { .addr = priv->cfg->i2c_addr, .flags = 0, - .len = sizeof(buf), + .len = 1 + len, .buf = buf, } }; + if (1 + len > sizeof(buf)) { + dev_warn(&priv->i2c->dev, + "%s: i2c wr reg=%04x: len=%d is too big!\n", + KBUILD_MODNAME, reg, len); + return -EINVAL; + } + buf[0] = reg; memcpy(&buf[1], val, len); @@ -69,7 +79,7 @@ static int fc2580_wr_regs(struct fc2580_ static int fc2580_rd_regs(struct fc2580_priv *priv, u8 reg, u8 *val, int len) { int ret; - u8 buf[len]; + u8 buf[MAX_XFER_SIZE]; struct i2c_msg msg[2] = { { .addr = priv->cfg->i2c_addr, @@ -79,11 +89,18 @@ static int fc2580_rd_regs(struct fc2580_ }, { .addr = priv->cfg->i2c_addr, .flags = I2C_M_RD, - .len = sizeof(buf), + .len = len, .buf = buf, } }; + if (len > sizeof(buf)) { + dev_warn(&priv->i2c->dev, + "%s: i2c rd reg=%04x: len=%d is too big!\n", + KBUILD_MODNAME, reg, len); + return -EINVAL; + } + ret = i2c_transfer(priv->i2c, msg, 2); if (ret == 2) { memcpy(val, buf, len); --- a/drivers/media/tuners/tda18212.c +++ b/drivers/media/tuners/tda18212.c @@ -20,6 +20,9 @@ #include "tda18212.h" +/* Max transfer size done by I2C transfer functions */ +#define MAX_XFER_SIZE 64 + struct tda18212_priv { struct tda18212_config *cfg; struct i2c_adapter *i2c; @@ -32,16 +35,23 @@ static int tda18212_wr_regs(struct tda18 int len) { int ret; - u8 buf[len+1]; + u8 buf[MAX_XFER_SIZE]; struct i2c_msg msg[1] = { { .addr = priv->cfg->i2c_address, .flags = 0, - .len = sizeof(buf), + .len = 1 + len, .buf = buf, } }; + if (1 + len > sizeof(buf)) { + dev_warn(&priv->i2c->dev, + "%s: i2c wr reg=%04x: len=%d is too big!\n", + KBUILD_MODNAME, reg, len); + return -EINVAL; + } + buf[0] = reg; memcpy(&buf[1], val, len); @@ -61,7 +71,7 @@ static int tda18212_rd_regs(struct tda18 int len) { int ret; - u8 buf[len]; + u8 buf[MAX_XFER_SIZE]; struct i2c_msg msg[2] = { { .addr = priv->cfg->i2c_address, @@ -71,11 +81,18 @@ static int tda18212_rd_regs(struct tda18 }, { .addr = priv->cfg->i2c_address, .flags = I2C_M_RD, - .len = sizeof(buf), + .len = len, .buf = buf, } }; + if (len > sizeof(buf)) { + dev_warn(&priv->i2c->dev, + "%s: i2c rd reg=%04x: len=%d is too big!\n", + KBUILD_MODNAME, reg, len); + return -EINVAL; + } + ret = i2c_transfer(priv->i2c, msg, 2); if (ret == 2) { memcpy(val, buf, len); --- a/drivers/media/tuners/tda18218.c +++ b/drivers/media/tuners/tda18218.c @@ -20,11 +20,14 @@ #include "tda18218_priv.h" +/* Max transfer size done by I2C transfer functions */ +#define MAX_XFER_SIZE 64 + /* write multiple registers */ static int tda18218_wr_regs(struct tda18218_priv *priv, u8 reg, u8 *val, u8 len) { int ret = 0, len2, remaining; - u8 buf[1 + len]; + u8 buf[MAX_XFER_SIZE]; struct i2c_msg msg[1] = { { .addr = priv->cfg->i2c_address, @@ -33,6 +36,13 @@ static int tda18218_wr_regs(struct tda18 } }; + if (1 + len > sizeof(buf)) { + dev_warn(&priv->i2c->dev, + "%s: i2c wr reg=%04x: len=%d is too big!\n", + KBUILD_MODNAME, reg, len); + return -EINVAL; + } + for (remaining = len; remaining > 0; remaining -= (priv->cfg->i2c_wr_max - 1)) { len2 = remaining; @@ -63,7 +73,7 @@ static int tda18218_wr_regs(struct tda18 static int tda18218_rd_regs(struct tda18218_priv *priv, u8 reg, u8 *val, u8 len) { int ret; - u8 buf[reg+len]; /* we must start read always from reg 0x00 */ + u8 buf[MAX_XFER_SIZE]; /* we must start read always from reg 0x00 */ struct i2c_msg msg[2] = { { .addr = priv->cfg->i2c_address, @@ -73,11 +83,18 @@ static int tda18218_rd_regs(struct tda18 }, { .addr = priv->cfg->i2c_address, .flags = I2C_M_RD, - .len = sizeof(buf), + .len = reg + len, .buf = buf, } }; + if (reg + len > sizeof(buf)) { + dev_warn(&priv->i2c->dev, + "%s: i2c wr reg=%04x: len=%d is too big!\n", + KBUILD_MODNAME, reg, len); + return -EINVAL; + } + ret = i2c_transfer(priv->i2c, msg, 2); if (ret == 2) { memcpy(val, &buf[reg], len); Patches currently in stable-queue which might be from m.chehab@xxxxxxxxxxx are queue-3.10/media-af9015-don-t-use-dynamic-static-allocation.patch queue-3.10/media-dw2102-don-t-use-dynamic-static-allocation.patch queue-3.10/media-af9035-don-t-use-dynamic-static-allocation.patch queue-3.10/media-stb0899_drv-don-t-use-dynamic-static-allocation.patch queue-3.10/media-dibusb-common-don-t-use-dynamic-static-allocation.patch queue-3.10/media-cx18-struct-i2c_client-is-too-big-for-stack.patch queue-3.10/media-tuner-xc2028-don-t-use-dynamic-static-allocation.patch queue-3.10/media-cimax2-don-t-use-dynamic-static-allocation.patch queue-3.10/media-tuners-don-t-use-dynamic-static-allocation.patch queue-3.10/media-dvb-frontends-again-don-t-use-dynamic-static-allocation.patch queue-3.10/media-dvb-frontends-don-t-use-dynamic-static-allocation.patch queue-3.10/media-stv090x-don-t-use-dynamic-static-allocation.patch queue-3.10/media-s5h1420-don-t-use-dynamic-static-allocation.patch queue-3.10/media-av7110_hw-don-t-use-dynamic-static-allocation.patch queue-3.10/media-stv0367-don-t-use-dynamic-static-allocation.patch queue-3.10/media-lirc_zilog-don-t-use-dynamic-static-allocation.patch queue-3.10/media-cxusb-don-t-use-dynamic-static-allocation.patch queue-3.10/media-mxl111sf-don-t-use-dynamic-static-allocation.patch -- To unsubscribe from this list: send the line "unsubscribe stable" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html