The patch below does not apply to the 4.9-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@xxxxxxxxxxxxxxx>.
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
>From f5e758b8358f6c27e8a351ddf0b441a64cdabb94 Mon Sep 17 00:00:00 2001
From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
Date: Wed, 5 Sep 2018 12:02:15 +0200
Subject: [PATCH] ARM: dts: exynos: Disable pull control for MAX8997 interrupts
on Origen
PMIC_IRQB and PMIC_KEYINB lines on Exynos4210-based Origen board have
external pull-up resistors, so disable any pull control for those lines
in respective pin controller node. This fixes support for MAX8997
interrupts and enables operation of wakeup from MAX8997 RTC alarm.
Signed-off-by: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
Fixes: 17419726aaa1 ("ARM: dts: add max8997 device node for exynos4210-origen board")
Cc: <stable@xxxxxxxxxxxxxxx>
Signed-off-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts
index 2ab99f9f3d0a..dd9ec05eb0f7 100644
--- a/arch/arm/boot/dts/exynos4210-origen.dts
+++ b/arch/arm/boot/dts/exynos4210-origen.dts
@@ -151,6 +151,8 @@
reg = <0x66>;
interrupt-parent = <&gpx0>;
interrupts = <4 IRQ_TYPE_NONE>, <3 IRQ_TYPE_NONE>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&max8997_irq>;
max8997,pmic-buck1-dvs-voltage = <1350000>;
max8997,pmic-buck2-dvs-voltage = <1100000>;
@@ -288,6 +290,13 @@
};
};
+&pinctrl_1 {
+ max8997_irq: max8997-irq {
+ samsung,pins = "gpx0-3", "gpx0-4";
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+};
+
&sdhci_0 {
bus-width = <4>;
pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_cd>;
