The patch below does not apply to the 3.12-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@xxxxxxxxxxxxxxx>.
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
>From d2e7491e24e47aa0305455031fc1b9ea1f97b555 Mon Sep 17 00:00:00 2001
From: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
Date: Fri, 15 Nov 2013 13:48:23 +0000
Subject: [PATCH] regulator: arizona-micsupp: Correct wm5110 voltage selection
wm5110 provides different voltage configurations than the other Arizona
parts, this patch adds support for this into the regulator driver. Also
fixup the default for the configuration register for wm5110.
Signed-off-by: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
Signed-off-by: Mark Brown <broonie@xxxxxxxxxx>
Cc: stable@xxxxxxxxxxxxxxx (v3.12)
diff --git a/drivers/regulator/arizona-micsupp.c b/drivers/regulator/arizona-micsupp.c
index 724706a97dc4..fd3154d86901 100644
--- a/drivers/regulator/arizona-micsupp.c
+++ b/drivers/regulator/arizona-micsupp.c
@@ -174,6 +174,33 @@ static const struct regulator_desc arizona_micsupp = {
.owner = THIS_MODULE,
};
+static const struct regulator_linear_range arizona_micsupp_ext_ranges[] = {
+ REGULATOR_LINEAR_RANGE(900000, 0, 0x14, 25000),
+ REGULATOR_LINEAR_RANGE(1500000, 0x15, 0x27, 100000),
+};
+
+static const struct regulator_desc arizona_micsupp_ext = {
+ .name = "MICVDD",
+ .supply_name = "CPVDD",
+ .type = REGULATOR_VOLTAGE,
+ .n_voltages = 40,
+ .ops = &arizona_micsupp_ops,
+
+ .vsel_reg = ARIZONA_LDO2_CONTROL_1,
+ .vsel_mask = ARIZONA_LDO2_VSEL_MASK,
+ .enable_reg = ARIZONA_MIC_CHARGE_PUMP_1,
+ .enable_mask = ARIZONA_CPMIC_ENA,
+ .bypass_reg = ARIZONA_MIC_CHARGE_PUMP_1,
+ .bypass_mask = ARIZONA_CPMIC_BYPASS,
+
+ .linear_ranges = arizona_micsupp_ext_ranges,
+ .n_linear_ranges = ARRAY_SIZE(arizona_micsupp_ext_ranges),
+
+ .enable_time = 3000,
+
+ .owner = THIS_MODULE,
+};
+
static const struct regulator_init_data arizona_micsupp_default = {
.constraints = {
.valid_ops_mask = REGULATOR_CHANGE_STATUS |
@@ -186,9 +213,22 @@ static const struct regulator_init_data arizona_micsupp_default = {
.num_consumer_supplies = 1,
};
+static const struct regulator_init_data arizona_micsupp_ext_default = {
+ .constraints = {
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS |
+ REGULATOR_CHANGE_VOLTAGE |
+ REGULATOR_CHANGE_BYPASS,
+ .min_uV = 900000,
+ .max_uV = 3300000,
+ },
+
+ .num_consumer_supplies = 1,
+};
+
static int arizona_micsupp_probe(struct platform_device *pdev)
{
struct arizona *arizona = dev_get_drvdata(pdev->dev.parent);
+ const struct regulator_desc *desc;
struct regulator_config config = { };
struct arizona_micsupp *micsupp;
int ret;
@@ -207,7 +247,17 @@ static int arizona_micsupp_probe(struct platform_device *pdev)
* default init_data for it. This will be overridden with
* platform data if provided.
*/
- micsupp->init_data = arizona_micsupp_default;
+ switch (arizona->type) {
+ case WM5110:
+ desc = &arizona_micsupp_ext;
+ micsupp->init_data = arizona_micsupp_ext_default;
+ break;
+ default:
+ desc = &arizona_micsupp;
+ micsupp->init_data = arizona_micsupp_default;
+ break;
+ }
+
micsupp->init_data.consumer_supplies = &micsupp->supply;
micsupp->supply.supply = "MICVDD";
micsupp->supply.dev_name = dev_name(arizona->dev);
@@ -226,7 +276,7 @@ static int arizona_micsupp_probe(struct platform_device *pdev)
ARIZONA_CPMIC_BYPASS, 0);
micsupp->regulator = devm_regulator_register(&pdev->dev,
- &arizona_micsupp,
+ desc,
&config);
if (IS_ERR(micsupp->regulator)) {
ret = PTR_ERR(micsupp->regulator);
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html