[PATCH AUTOSEL 4.19 18/57] tty: check name length in tty_find_polling_driver()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Miles Chen <miles.chen@xxxxxxxxxxxx>

[ Upstream commit 33a1a7be198657c8ca26ad406c4d2a89b7162bcc ]

The issue is found by a fuzzing test.
If tty_find_polling_driver() recevies an incorrect input such as
',,' or '0b', the len becomes 0 and strncmp() always return 0.
In this case, a null p->ops->poll_init() is called and it causes a kernel
panic.

Fix this by checking name length against zero in tty_find_polling_driver().

$echo ,, > /sys/module/kgdboc/parameters/kgdboc
[   20.804451] WARNING: CPU: 1 PID: 104 at drivers/tty/serial/serial_core.c:457
uart_get_baud_rate+0xe8/0x190
[   20.804917] Modules linked in:
[   20.805317] CPU: 1 PID: 104 Comm: sh Not tainted 4.19.0-rc7ajb #8
[   20.805469] Hardware name: linux,dummy-virt (DT)
[   20.805732] pstate: 20000005 (nzCv daif -PAN -UAO)
[   20.805895] pc : uart_get_baud_rate+0xe8/0x190
[   20.806042] lr : uart_get_baud_rate+0xc0/0x190
[   20.806476] sp : ffffffc06acff940
[   20.806676] x29: ffffffc06acff940 x28: 0000000000002580
[   20.806977] x27: 0000000000009600 x26: 0000000000009600
[   20.807231] x25: ffffffc06acffad0 x24: 00000000ffffeff0
[   20.807576] x23: 0000000000000001 x22: 0000000000000000
[   20.807807] x21: 0000000000000001 x20: 0000000000000000
[   20.808049] x19: ffffffc06acffac8 x18: 0000000000000000
[   20.808277] x17: 0000000000000000 x16: 0000000000000000
[   20.808520] x15: ffffffffffffffff x14: ffffffff00000000
[   20.808757] x13: ffffffffffffffff x12: 0000000000000001
[   20.809011] x11: 0101010101010101 x10: ffffff880d59ff5f
[   20.809292] x9 : ffffff880d59ff5e x8 : ffffffc06acffaf3
[   20.809549] x7 : 0000000000000000 x6 : ffffff880d59ff5f
[   20.809803] x5 : 0000000080008001 x4 : 0000000000000003
[   20.810056] x3 : ffffff900853e6b4 x2 : dfffff9000000000
[   20.810693] x1 : ffffffc06acffad0 x0 : 0000000000000cb0
[   20.811005] Call trace:
[   20.811214]  uart_get_baud_rate+0xe8/0x190
[   20.811479]  serial8250_do_set_termios+0xe0/0x6f4
[   20.811719]  serial8250_set_termios+0x48/0x54
[   20.811928]  uart_set_options+0x138/0x1bc
[   20.812129]  uart_poll_init+0x114/0x16c
[   20.812330]  tty_find_polling_driver+0x158/0x200
[   20.812545]  configure_kgdboc+0xbc/0x1bc
[   20.812745]  param_set_kgdboc_var+0xb8/0x150
[   20.812960]  param_attr_store+0xbc/0x150
[   20.813160]  module_attr_store+0x40/0x58
[   20.813364]  sysfs_kf_write+0x8c/0xa8
[   20.813563]  kernfs_fop_write+0x154/0x290
[   20.813764]  vfs_write+0xf0/0x278
[   20.813951]  __arm64_sys_write+0x84/0xf4
[   20.814400]  el0_svc_common+0xf4/0x1dc
[   20.814616]  el0_svc_handler+0x98/0xbc
[   20.814804]  el0_svc+0x8/0xc
[   20.822005] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
[   20.826913] Mem abort info:
[   20.827103]   ESR = 0x84000006
[   20.827352]   Exception class = IABT (current EL), IL = 16 bits
[   20.827655]   SET = 0, FnV = 0
[   20.827855]   EA = 0, S1PTW = 0
[   20.828135] user pgtable: 4k pages, 39-bit VAs, pgdp = (____ptrval____)
[   20.828484] [0000000000000000] pgd=00000000aadee003, pud=00000000aadee003, pmd=0000000000000000
[   20.829195] Internal error: Oops: 84000006 [#1] SMP
[   20.829564] Modules linked in:
[   20.829890] CPU: 1 PID: 104 Comm: sh Tainted: G        W         4.19.0-rc7ajb #8
[   20.830545] Hardware name: linux,dummy-virt (DT)
[   20.830829] pstate: 60000085 (nZCv daIf -PAN -UAO)
[   20.831174] pc :           (null)
[   20.831457] lr : serial8250_do_set_termios+0x358/0x6f4
[   20.831727] sp : ffffffc06acff9b0
[   20.831936] x29: ffffffc06acff9b0 x28: ffffff9008d7c000
[   20.832267] x27: ffffff900969e16f x26: 0000000000000000
[   20.832589] x25: ffffff900969dfb0 x24: 0000000000000000
[   20.832906] x23: ffffffc06acffad0 x22: ffffff900969e160
[   20.833232] x21: 0000000000000000 x20: ffffffc06acffac8
[   20.833559] x19: ffffff900969df90 x18: 0000000000000000
[   20.833878] x17: 0000000000000000 x16: 0000000000000000
[   20.834491] x15: ffffffffffffffff x14: ffffffff00000000
[   20.834821] x13: ffffffffffffffff x12: 0000000000000001
[   20.835143] x11: 0101010101010101 x10: ffffff880d59ff5f
[   20.835467] x9 : ffffff880d59ff5e x8 : ffffffc06acffaf3
[   20.835790] x7 : 0000000000000000 x6 : ffffff880d59ff5f
[   20.836111] x5 : c06419717c314100 x4 : 0000000000000007
[   20.836419] x3 : 0000000000000000 x2 : 0000000000000000
[   20.836732] x1 : 0000000000000001 x0 : ffffff900969df90
[   20.837100] Process sh (pid: 104, stack limit = 0x(____ptrval____))
[   20.837396] Call trace:
[   20.837566]            (null)
[   20.837816]  serial8250_set_termios+0x48/0x54
[   20.838089]  uart_set_options+0x138/0x1bc
[   20.838570]  uart_poll_init+0x114/0x16c
[   20.838834]  tty_find_polling_driver+0x158/0x200
[   20.839119]  configure_kgdboc+0xbc/0x1bc
[   20.839380]  param_set_kgdboc_var+0xb8/0x150
[   20.839658]  param_attr_store+0xbc/0x150
[   20.839920]  module_attr_store+0x40/0x58
[   20.840183]  sysfs_kf_write+0x8c/0xa8
[   20.840183]  sysfs_kf_write+0x8c/0xa8
[   20.840440]  kernfs_fop_write+0x154/0x290
[   20.840702]  vfs_write+0xf0/0x278
[   20.840942]  __arm64_sys_write+0x84/0xf4
[   20.841209]  el0_svc_common+0xf4/0x1dc
[   20.841471]  el0_svc_handler+0x98/0xbc
[   20.841713]  el0_svc+0x8/0xc
[   20.842057] Code: bad PC value
[   20.842764] ---[ end trace a8835d7de79aaadf ]---
[   20.843134] Kernel panic - not syncing: Fatal exception
[   20.843515] SMP: stopping secondary CPUs
[   20.844289] Kernel Offset: disabled
[   20.844634] CPU features: 0x0,21806002
[   20.844857] Memory Limit: none
[   20.845172] ---[ end Kernel panic - not syncing: Fatal exception ]---

Signed-off-by: Miles Chen <miles.chen@xxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
 drivers/tty/tty_io.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c
index 5e5da9acaf0a..252eef2c32f9 100644
--- a/drivers/tty/tty_io.c
+++ b/drivers/tty/tty_io.c
@@ -408,7 +408,7 @@ struct tty_driver *tty_find_polling_driver(char *name, int *line)
 	mutex_lock(&tty_mutex);
 	/* Search through the tty devices to look for a match */
 	list_for_each_entry(p, &tty_drivers, tty_drivers) {
-		if (strncmp(name, p->name, len) != 0)
+		if (!len || strncmp(name, p->name, len) != 0)
 			continue;
 		stp = str;
 		if (*stp == ',')
-- 
2.17.1




[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux