From: Johan Hovold <johan@xxxxxxxxxx>
commit 35aecc02b5b621782111f64cbb032c7f6a90bb32 upstream
Allow matching on interfaces having two endpoints by adding a new
device-id flag.
This allows for the handling of devices whose interface numbers can
change (e.g. Quectel EP06) to be contained in the device-id table.
The upstream commit removes a variable that is still in use in the 4.14
version of the option-driver, so the removal is undone.
Tested-by: Kristian Evensen <kristian.evensen@xxxxxxxxx>
Cc: stable <stable@xxxxxxxxxxxxxxx>
Signed-off-by: Johan Hovold <johan@xxxxxxxxxx>
Signed-off-by: Kristian Evensen <kristian.evensen@xxxxxxxxx>
---
drivers/usb/serial/option.c | 16 +++++++---------
1 file changed, 7 insertions(+), 9 deletions(-)
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index d8d3cb18e..392fddc80 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -564,6 +564,9 @@ static void option_instat_callback(struct urb *urb);
/* Interface is reserved */
#define RSVD(ifnum) ((BIT(ifnum) & 0xff) << 0)
+/* Interface must have two endpoints */
+#define NUMEP2 BIT(16)
+
static const struct usb_device_id option_ids[] = {
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) },
@@ -1085,7 +1088,7 @@ static const struct usb_device_id option_ids[] = {
{ USB_DEVICE(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_BG96),
.driver_info = RSVD(4) },
{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EP06, 0xff, 0xff, 0xff),
- .driver_info = RSVD(1) | RSVD(2) | RSVD(3) | RSVD(4) },
+ .driver_info = RSVD(1) | RSVD(2) | RSVD(3) | RSVD(4) | NUMEP2 },
{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EP06, 0xff, 0, 0) },
{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6001) },
{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CMU_300) },
@@ -2012,16 +2015,11 @@ static int option_probe(struct usb_serial *serial,
return -ENODEV;
/*
- * Don't bind to the QMI device of the Quectel EP06/EG06/EM06. Class,
- * subclass and protocol is 0xff for both the diagnostic port and the
- * QMI interface, but the diagnostic port only has two endpoints (QMI
- * has three).
+ * Allow matching on bNumEndpoints for devices whose interface numbers
+ * can change (e.g. Quectel EP06).
*/
- if (dev_desc->idVendor == cpu_to_le16(QUECTEL_VENDOR_ID) &&
- dev_desc->idProduct == cpu_to_le16(QUECTEL_PRODUCT_EP06) &&
- iface_desc->bInterfaceSubClass && iface_desc->bNumEndpoints == 3) {
+ if (device_flags & NUMEP2 && iface_desc->bNumEndpoints != 2)
return -ENODEV;
- }
/* Store the device flags so we can use them during attach. */
usb_set_serial_data(serial, (void *)device_flags);
--
2.14.1
