From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
[ Upstream commit 89c68b102f13f123aaef22b292526d6b92501334 ]
It looks like we parse the drive strength setting here, but never
actually write it into the hardware to update it. Parse the setting and
then write it at the end of the pinconf setting function so that it
actually sticks in the hardware.
Fixes: 0e948042c420 ("pinctrl: qcom: spmi-mpp: Implement support for sink mode")
Cc: Doug Anderson <dianders@xxxxxxxxxxxx>
Signed-off-by: Stephen Boyd <swboyd@xxxxxxxxxxxx>
Reviewed-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
drivers/pinctrl/qcom/pinctrl-spmi-mpp.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c b/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c
index 418bc40df7ca..7577f133d326 100644
--- a/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c
+++ b/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c
@@ -457,7 +457,7 @@ static int pmic_mpp_config_set(struct pinctrl_dev *pctldev, unsigned int pin,
pad->dtest = arg;
break;
case PIN_CONFIG_DRIVE_STRENGTH:
- arg = pad->drive_strength;
+ pad->drive_strength = arg;
break;
case PMIC_MPP_CONF_AMUX_ROUTE:
if (arg >= PMIC_MPP_AMUX_ROUTE_ABUS4)
@@ -504,6 +504,10 @@ static int pmic_mpp_config_set(struct pinctrl_dev *pctldev, unsigned int pin,
if (ret < 0)
return ret;
+ ret = pmic_mpp_write(state, pad, PMIC_MPP_REG_SINK_CTL, pad->drive_strength);
+ if (ret < 0)
+ return ret;
+
val = pad->is_enabled << PMIC_MPP_REG_MASTER_EN_SHIFT;
return pmic_mpp_write(state, pad, PMIC_MPP_REG_EN_CTL, val);
--
2.17.1
