[PATCH AUTOSEL 4.18 089/100] be2net: don't flip hw_features when VXLANs are added/deleted

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Davide Caratti <dcaratti@xxxxxxxxxx>

[ Upstream commit 2d52527e80c2dc0c5f43f50adf183781262ec565 ]

the be2net implementation of .ndo_tunnel_{add,del}() changes the value of
NETIF_F_GSO_UDP_TUNNEL bit in 'features' and 'hw_features', but it forgets
to call netdev_features_change(). Moreover, ethtool setting for that bit
can potentially be reverted after a tunnel is added or removed.

GSO already does software segmentation when 'hw_enc_features' is 0, even
if VXLAN offload is turned on. In addition, commit 096de2f83ebc ("benet:
stricter vxlan offloading check in be_features_check") avoids hardware
segmentation of non-VXLAN tunneled packets, or VXLAN packets having wrong
destination port. So, it's safe to avoid flipping the above feature on
addition/deletion of VXLAN tunnels.

Fixes: 630f4b70567f ("be2net: Export tunnel offloads only when a VxLAN tunnel is created")
Signed-off-by: Davide Caratti <dcaratti@xxxxxxxxxx>
Signed-off-by: David S. Miller <davem@xxxxxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
 drivers/net/ethernet/emulex/benet/be_main.c | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c
index 8f755009ff38..c8445a4135a9 100644
--- a/drivers/net/ethernet/emulex/benet/be_main.c
+++ b/drivers/net/ethernet/emulex/benet/be_main.c
@@ -3915,8 +3915,6 @@ static int be_enable_vxlan_offloads(struct be_adapter *adapter)
 	netdev->hw_enc_features |= NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
 				   NETIF_F_TSO | NETIF_F_TSO6 |
 				   NETIF_F_GSO_UDP_TUNNEL;
-	netdev->hw_features |= NETIF_F_GSO_UDP_TUNNEL;
-	netdev->features |= NETIF_F_GSO_UDP_TUNNEL;
 
 	dev_info(dev, "Enabled VxLAN offloads for UDP port %d\n",
 		 be16_to_cpu(port));
@@ -3938,8 +3936,6 @@ static void be_disable_vxlan_offloads(struct be_adapter *adapter)
 	adapter->vxlan_port = 0;
 
 	netdev->hw_enc_features = 0;
-	netdev->hw_features &= ~(NETIF_F_GSO_UDP_TUNNEL);
-	netdev->features &= ~(NETIF_F_GSO_UDP_TUNNEL);
 }
 
 static void be_calculate_vf_res(struct be_adapter *adapter, u16 num_vfs,
@@ -5232,6 +5228,7 @@ static void be_netdev_init(struct net_device *netdev)
 	struct be_adapter *adapter = netdev_priv(netdev);
 
 	netdev->hw_features |= NETIF_F_SG | NETIF_F_TSO | NETIF_F_TSO6 |
+		NETIF_F_GSO_UDP_TUNNEL |
 		NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM | NETIF_F_RXCSUM |
 		NETIF_F_HW_VLAN_CTAG_TX;
 	if ((be_if_cap_flags(adapter) & BE_IF_FLAGS_RSS))
-- 
2.17.1




[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux