From: Baruch Siach <baruch@xxxxxxxxxx> [ Upstream commit 7e4183752735deb7543e179a44f4f4b44917cd6f ] When connecting SFP PHY to phylink use the detected interface. Otherwise, the link fails to come up when the configured 'phy-mode' differs from the SFP detected mode. Move most of phylink_connect_phy() into __phylink_connect_phy(), and leave phylink_connect_phy() as a wrapper. phylink_sfp_connect_phy() can now pass the SFP detected PHY interface to __phylink_connect_phy(). This fixes 1GB SFP module link up on eth3 of the Macchiatobin board that is configured in the DT to "2500base-x" phy-mode. Fixes: 9525ae83959b6 ("phylink: add phylink infrastructure") Suggested-by: Russell King <rmk+kernel@xxxxxxxxxxxxxxx> Signed-off-by: Baruch Siach <baruch@xxxxxxxxxx> Signed-off-by: David S. Miller <davem@xxxxxxxxxxxxx> Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> --- drivers/net/phy/phylink.c | 48 +++++++++++++++++++++++---------------- 1 file changed, 28 insertions(+), 20 deletions(-) diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c index af4dc4425be2..5827fccd4f29 100644 --- a/drivers/net/phy/phylink.c +++ b/drivers/net/phy/phylink.c @@ -717,6 +717,30 @@ static int phylink_bringup_phy(struct phylink *pl, struct phy_device *phy) return 0; } +static int __phylink_connect_phy(struct phylink *pl, struct phy_device *phy, + phy_interface_t interface) +{ + int ret; + + if (WARN_ON(pl->link_an_mode == MLO_AN_FIXED || + (pl->link_an_mode == MLO_AN_INBAND && + phy_interface_mode_is_8023z(interface)))) + return -EINVAL; + + if (pl->phydev) + return -EBUSY; + + ret = phy_attach_direct(pl->netdev, phy, 0, interface); + if (ret) + return ret; + + ret = phylink_bringup_phy(pl, phy); + if (ret) + phy_detach(phy); + + return ret; +} + /** * phylink_connect_phy() - connect a PHY to the phylink instance * @pl: a pointer to a &struct phylink returned from phylink_create() @@ -734,31 +758,13 @@ static int phylink_bringup_phy(struct phylink *pl, struct phy_device *phy) */ int phylink_connect_phy(struct phylink *pl, struct phy_device *phy) { - int ret; - - if (WARN_ON(pl->link_an_mode == MLO_AN_FIXED || - (pl->link_an_mode == MLO_AN_INBAND && - phy_interface_mode_is_8023z(pl->link_interface)))) - return -EINVAL; - - if (pl->phydev) - return -EBUSY; - /* Use PHY device/driver interface */ if (pl->link_interface == PHY_INTERFACE_MODE_NA) { pl->link_interface = phy->interface; pl->link_config.interface = pl->link_interface; } - ret = phy_attach_direct(pl->netdev, phy, 0, pl->link_interface); - if (ret) - return ret; - - ret = phylink_bringup_phy(pl, phy); - if (ret) - phy_detach(phy); - - return ret; + return __phylink_connect_phy(pl, phy, pl->link_interface); } EXPORT_SYMBOL_GPL(phylink_connect_phy); @@ -1672,7 +1678,9 @@ static void phylink_sfp_link_up(void *upstream) static int phylink_sfp_connect_phy(void *upstream, struct phy_device *phy) { - return phylink_connect_phy(upstream, phy); + struct phylink *pl = upstream; + + return __phylink_connect_phy(upstream, phy, pl->link_config.interface); } static void phylink_sfp_disconnect_phy(void *upstream) -- 2.17.1