From: Jianbo Liu <jianbol@xxxxxxxxxxxx> [ Upstream commit cee26487620bc9bc3c7db21b6984d91f7bae12ae ] In flow steering, if asked to, the hardware matches on the first ethertype which is not vlan. It's possible to set a rule as follows, which is meant to match on untagged packet, but will match on a vlan packet: tc filter add dev eth0 parent ffff: protocol ip flower ... To avoid this for packets with single tag, we set vlan masks to tell hardware to check the tags for every matched packet. Fixes: 095b6cfd69ce ('net/mlx5e: Add TC vlan match parsing') Signed-off-by: Jianbo Liu <jianbol@xxxxxxxxxxxx> Reviewed-by: Or Gerlitz <ogerlitz@xxxxxxxxxxxx> Signed-off-by: Saeed Mahameed <saeedm@xxxxxxxxxxxx> Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> --- drivers/net/ethernet/mellanox/mlx5/core/en_tc.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c index e28f9dab9ceb..9e0be077df9c 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c @@ -864,6 +864,9 @@ static int __parse_cls_flower(struct mlx5e_priv *priv, MLX5_SET(fte_match_set_lyr_2_4, headers_c, first_prio, mask->vlan_priority); MLX5_SET(fte_match_set_lyr_2_4, headers_v, first_prio, key->vlan_priority); } + } else { + MLX5_SET(fte_match_set_lyr_2_4, headers_c, svlan_tag, 1); + MLX5_SET(fte_match_set_lyr_2_4, headers_c, cvlan_tag, 1); } if (addr_type == FLOW_DISSECTOR_KEY_IPV4_ADDRS) { -- 2.17.1