4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
commit 8dbbaa47b96f6ea5f09f922b4effff3c505cd8cf upstream.
When interrupted, wait_event_interruptible_timeout() returns
-ERESTARTSYS, and the SPI transfer in progress will fail, as expected:
m25p80 spi0.0: SPI transfer failed: -512
spi_master spi0: failed to transfer one message from queue
However, as the underlying DMA transfers may not have completed, all
subsequent SPI transfers may start to fail:
spi_master spi0: receive timeout
qspi_transfer_out_in() returned -110
m25p80 spi0.0: SPI transfer failed: -110
spi_master spi0: failed to transfer one message from queue
Fix this by calling dmaengine_terminate_all() not only for timeouts, but
also for errors.
This can be reproduced on r8a7991/koelsch, using "hd /dev/mtd0" followed
by CTRL-C.
Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
Signed-off-by: Mark Brown <broonie@xxxxxxxxxx>
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/spi/spi-rspi.c | 10 ++++++----
1 file changed, 6 insertions(+), 4 deletions(-)
--- a/drivers/spi/spi-rspi.c
+++ b/drivers/spi/spi-rspi.c
@@ -587,11 +587,13 @@ static int rspi_dma_transfer(struct rspi
ret = wait_event_interruptible_timeout(rspi->wait,
rspi->dma_callbacked, HZ);
- if (ret > 0 && rspi->dma_callbacked)
+ if (ret > 0 && rspi->dma_callbacked) {
ret = 0;
- else if (!ret) {
- dev_err(&rspi->master->dev, "DMA timeout\n");
- ret = -ETIMEDOUT;
+ } else {
+ if (!ret) {
+ dev_err(&rspi->master->dev, "DMA timeout\n");
+ ret = -ETIMEDOUT;
+ }
if (tx)
dmaengine_terminate_all(rspi->master->dma_tx);
if (rx)
