On 2/10/2018 4:06 PM, Marco Felsch wrote:
Since 'commit 02e389e63e35 ("pinctrl: mcp23s08: fix irq setup order")' the
irq request isn't the last devm_* allocation. Without a deeper look at
the irq and testing this isn't a good solution. Since this driver relies
on the devm mechanism, requesting a interrupt should be the last thing
to avoid memory corruptions during unbinding.
'Commit 02e389e63e35 ("pinctrl: mcp23s08: fix irq setup order")' fixed the
order for the interrupt-controller use case only. The
mcp23s08_irq_setup() must be split into two to fix it for the
interrupt-controller use case and to register the irq at last. So the
irq will be freed first during unbind.
Tested with mcp23s18 with an irq.
Tested-by: Phil Reid <preid@xxxxxxxxxxxxxxxxx>
Cc: stable@xxxxxxxxxxxxxxx
Cc: Phil Reid <preid@xxxxxxxxxxxxxxxxx>
Cc: Jan Kundrát <jan.kundrat@xxxxxxxxx>
Cc: Dmitry Mastykin <mastichi@xxxxxxxxx>
Cc: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxxxx>
Fixes: 82039d244f87 ("pinctrl: mcp23s08: add pinconf support")
Fixes: 02e389e63e35 ("pinctrl: mcp23s08: fix irq setup order")
Signed-off-by: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
---
drivers/pinctrl/pinctrl-mcp23s08.c | 13 ++++++++++++-
1 file changed, 12 insertions(+), 1 deletion(-)
diff --git a/drivers/pinctrl/pinctrl-mcp23s08.c b/drivers/pinctrl/pinctrl-mcp23s08.c
index 4a8a8efadefa..cf73a403d22d 100644
--- a/drivers/pinctrl/pinctrl-mcp23s08.c
+++ b/drivers/pinctrl/pinctrl-mcp23s08.c
@@ -636,6 +636,14 @@ static int mcp23s08_irq_setup(struct mcp23s08 *mcp)
return err;
}
+ return 0;
+}
+
+static int mcp23s08_irqchip_setup(struct mcp23s08 *mcp)
+{
+ struct gpio_chip *chip = &mcp->chip;
+ int err;
+
err = gpiochip_irqchip_add_nested(chip,
&mcp23s08_irq_chip,
0,
@@ -912,7 +920,7 @@ static int mcp23s08_probe_one(struct mcp23s08 *mcp, struct device *dev,
}
if (mcp->irq && mcp->irq_controller) {
- ret = mcp23s08_irq_setup(mcp);
+ ret = mcp23s08_irqchip_setup(mcp);
if (ret)
goto fail;
}
@@ -944,6 +952,9 @@ static int mcp23s08_probe_one(struct mcp23s08 *mcp, struct device *dev,
goto fail;
}
+ if (mcp->irq)
+ ret = mcp23s08_irq_setup(mcp);
+
fail:
if (ret < 0)
dev_dbg(dev, "can't setup chip %d, --> %d\n", addr, ret);
--
Regards
Phil Reid
