On Mon, Oct 01, 2018 at 05:31:20PM +0300, Ville Syrjala wrote: > From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx> > > When we decide that a plane is attached to the wrong pipe we try > to turn off said plane. However we are passing around the crtc we > think that the plane is supposed to be using rather than the crtc > it is currently using. That doesn't work all that well because > we may have to do vblank waits etc. and the other pipe might > not even be enabled here. So let's pass the plane's current crtc to > intel_plane_disable_noatomic() so that it can its job correctly. > > To do that semi-cleanly we also have to change the plane readout > to record the plane's visibility into the bitmasks of the crtc > where the plane is currently enabled rather than to the crtc > we want to use for the plane. > > One caveat here is that our active_planes bitmask will get confused > if both planes are enabled on the same pipe. Fortunately we can use > plane_mask to reconstruct active_planes sufficiently since > plane_mask still has the same meaning (is the plane visible?) > during readout. We also have to do the same during the initial > plane readout as the second plane could clear the active_planes > bit the first plane had already set. How often have we broken this :-/ Unfortunately I still don't have a good idea how to best CI this, since we shut down everything on module unload. Maybe we should have a special mode for module unload to leave the hw on, so that we can start testing various fastboot scenarios ... Some questions below. > Cc: stable@xxxxxxxxxxxxxxx # fcba862e8428 drm/i915: Have plane->get_hw_state() return the current pipe > Cc: stable@xxxxxxxxxxxxxxx > Cc: Dennis <dennis.nezic@xxxxxxxxxxx> > Tested-by: Dennis <dennis.nezic@xxxxxxxxxxx> > Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105637 > Fixes: b1e01595a66d ("drm/i915: Redo plane sanitation during readout") > Signed-off-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx> > --- > drivers/gpu/drm/i915/intel_display.c | 63 +++++++++++++++++++++++++++--------- > 1 file changed, 47 insertions(+), 16 deletions(-) > > diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c > index e018b37bed39..c72be8cd1f54 100644 > --- a/drivers/gpu/drm/i915/intel_display.c > +++ b/drivers/gpu/drm/i915/intel_display.c > @@ -15475,15 +15475,16 @@ void i830_disable_pipe(struct drm_i915_private *dev_priv, enum pipe pipe) > POSTING_READ(DPLL(pipe)); > } > > -static bool intel_plane_mapping_ok(struct intel_crtc *crtc, > - struct intel_plane *plane) > +static void fixup_active_planes(struct intel_crtc *crtc) > { > - enum pipe pipe; > - > - if (!plane->get_hw_state(plane, &pipe)) > - return true; > + struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); > + struct intel_crtc_state *crtc_state = > + to_intel_crtc_state(crtc->base.state); > + struct drm_plane *plane; > > - return pipe == crtc->pipe; > + drm_for_each_plane_mask(plane, &dev_priv->drm, > + crtc_state->base.plane_mask) > + crtc_state->active_planes |= BIT(to_intel_plane(plane)->id); I think we need to also update plane_mask here. > } > > static void > @@ -15497,13 +15498,28 @@ intel_sanitize_plane_mapping(struct drm_i915_private *dev_priv) > for_each_intel_crtc(&dev_priv->drm, crtc) { > struct intel_plane *plane = > to_intel_plane(crtc->base.primary); > + struct intel_crtc *plane_crtc; > + enum pipe pipe; > + > + if (!plane->get_hw_state(plane, &pipe)) > + continue; > > - if (intel_plane_mapping_ok(crtc, plane)) > + if (pipe == crtc->pipe) > continue; > > DRM_DEBUG_KMS("%s attached to the wrong pipe, disabling plane\n", > plane->base.name); > - intel_plane_disable_noatomic(crtc, plane); > + > + plane_crtc = intel_get_crtc_for_pipe(dev_priv, pipe); > + intel_plane_disable_noatomic(plane_crtc, plane); > + > + /* > + * Our active_planes tracking will get confused here > + * if both planes A and B are enabled on the same pipe > + * (since both planes map to BIT(PLANE_PRIMARY)). > + * Reconstruct active_planes after disabling the plane. > + */ Hm, would be neat if we could retire intel_crtc_state->active_planes in favour of drm_crtc_state->plane_mask. Except for that entire visible y/n thing :-/ > + fixup_active_planes(plane_crtc); Bit a bikeshed, but what about throwing the plane state away and just starting over, instead of trying to fix it up? We could then use that as a consistency check, if the plane mappings are still wrong our code is broken and we should bail out with a very loud warning. But this here should work too, albeit a bit more fragile I think. Cheers, Daniel > } > } > > @@ -15671,23 +15687,38 @@ void i915_redisable_vga(struct drm_i915_private *dev_priv) > } > > /* FIXME read out full plane state for all planes */ > -static void readout_plane_state(struct intel_crtc *crtc) > +static void readout_plane_state(struct drm_i915_private *dev_priv) > { > - struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); > - struct intel_crtc_state *crtc_state = > - to_intel_crtc_state(crtc->base.state); > struct intel_plane *plane; > + struct intel_crtc *crtc; > > - for_each_intel_plane_on_crtc(&dev_priv->drm, crtc, plane) { > + for_each_intel_plane(&dev_priv->drm, plane) { > struct intel_plane_state *plane_state = > to_intel_plane_state(plane->base.state); > + struct intel_crtc_state *crtc_state; > enum pipe pipe; > bool visible; > > visible = plane->get_hw_state(plane, &pipe); > > + crtc = intel_get_crtc_for_pipe(dev_priv, pipe); > + crtc_state = to_intel_crtc_state(crtc->base.state); > + > intel_set_plane_visible(crtc_state, plane_state, visible); > } > + > + for_each_intel_crtc(&dev_priv->drm, crtc) { > + /* > + * Our active_planes tracking may get confused here > + * on gen2/3 if the first plane is enabled but the > + * second one isn't but both indicate the same pipe. > + * The second plane would clear the active_planes > + * bit for the first plane (since both map to > + * BIT(PLANE_PRIMARY). Reconstruct active_planes > + * after plane readout is done. > + */ > + fixup_active_planes(crtc); > + } > } > > static void intel_modeset_readout_hw_state(struct drm_device *dev) > @@ -15719,13 +15750,13 @@ static void intel_modeset_readout_hw_state(struct drm_device *dev) > if (crtc_state->base.active) > dev_priv->active_crtcs |= 1 << crtc->pipe; > > - readout_plane_state(crtc); > - > DRM_DEBUG_KMS("[CRTC:%d:%s] hw state readout: %s\n", > crtc->base.base.id, crtc->base.name, > enableddisabled(crtc_state->base.active)); > } > > + readout_plane_state(dev_priv); > + > for (i = 0; i < dev_priv->num_shared_dpll; i++) { > struct intel_shared_dpll *pll = &dev_priv->shared_dplls[i]; > > -- > 2.16.4 > > _______________________________________________ > Intel-gfx mailing list > Intel-gfx@xxxxxxxxxxxxxxxxxxxxx > https://lists.freedesktop.org/mailman/listinfo/intel-gfx -- Daniel Vetter Software Engineer, Intel Corporation http://blog.ffwll.ch
