This is a note to let you know that I've just added the patch titled
usb: Disable USB 2.0 Link PM before device reset.
to the 3.12-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
usb-disable-usb-2.0-link-pm-before-device-reset.patch
and it can be found in the queue-3.12 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
>From dcc01c0864823f91c3bf3ffca6613e2351702b87 Mon Sep 17 00:00:00 2001
From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
Date: Mon, 30 Sep 2013 17:26:29 +0300
Subject: usb: Disable USB 2.0 Link PM before device reset.
From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
commit dcc01c0864823f91c3bf3ffca6613e2351702b87 upstream.
Before the USB core resets a device, we need to disable the L1 timeout
for the roothub, if USB 2.0 Link PM is enabled. Otherwise the port may
transition into L1 in between descriptor fetches, before we know if the
USB device descriptors changed. LPM will be re-enabled after the
full device descriptors are fetched, and we can confirm the device still
supports USB 2.0 LPM after the reset.
We don't need to wait for the USB device to exit L1 before resetting the
device, since the xHCI roothub port diagrams show a transition to the
Reset state from any of the Ux states (see Figure 34 in the 2012-08-14
xHCI specification update).
This patch should be backported to kernels as old as 3.2, that contain
the commit 65580b4321eb36f16ae8b5987bfa1bb948fc5112 "xHCI: set USB2
hardware LPM". That was the first commit to enable USB 2.0
hardware-driven Link Power Management.
Signed-off-by: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/usb/core/hub.c | 6 ++++++
1 file changed, 6 insertions(+)
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -5118,6 +5118,12 @@ static int usb_reset_and_verify_device(s
}
parent_hub = usb_hub_to_struct_hub(parent_hdev);
+ /* Disable USB2 hardware LPM.
+ * It will be re-enabled by the enumeration process.
+ */
+ if (udev->usb2_hw_lpm_enabled == 1)
+ usb_set_usb2_hardware_lpm(udev, 0);
+
bos = udev->bos;
udev->bos = NULL;
Patches currently in stable-queue which might be from sarah.a.sharp@xxxxxxxxxxxxxxx are
queue-3.12/xhci-enable-lpm-support-only-for-hardwired-or-besl-devices.patch
queue-3.12/usb-disable-usb-2.0-link-pm-before-device-reset.patch
queue-3.12/usb-don-t-enable-usb-2.0-link-pm-by-default.patch
queue-3.12/xhci-set-l1-device-slot-on-usb2-lpm-enable-disable.patch
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html