From: Kan Liang <kan.liang@xxxxxxxxxxxxxxx>
The counters on M3UPI Link 0 and Link 3 don't count. Writing 0 to
these counters may causes system crash on some machines.
The PCI BDF addresses of M3UPI in current code are incorrect.
The correct addresses should be
D18:F1 0x204D
D18:F2 0x204E
D18:F5 0x204D
Signed-off-by: Kan Liang <kan.liang@xxxxxxxxxxxxxxx>
---
arch/x86/events/intel/uncore_snbep.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/arch/x86/events/intel/uncore_snbep.c b/arch/x86/events/intel/uncore_snbep.c
index 51d7c11..3b3fc92 100644
--- a/arch/x86/events/intel/uncore_snbep.c
+++ b/arch/x86/events/intel/uncore_snbep.c
@@ -3931,16 +3931,16 @@ static const struct pci_device_id skx_uncore_pci_ids[] = {
.driver_data = UNCORE_PCI_DEV_FULL_DATA(21, 5, SKX_PCI_UNCORE_M2PCIE, 3),
},
{ /* M3UPI0 Link 0 */
- PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x204C),
- .driver_data = UNCORE_PCI_DEV_FULL_DATA(18, 0, SKX_PCI_UNCORE_M3UPI, 0),
+ PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x204D),
+ .driver_data = UNCORE_PCI_DEV_FULL_DATA(18, 1, SKX_PCI_UNCORE_M3UPI, 0),
},
{ /* M3UPI0 Link 1 */
- PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x204D),
- .driver_data = UNCORE_PCI_DEV_FULL_DATA(18, 1, SKX_PCI_UNCORE_M3UPI, 1),
+ PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x204E),
+ .driver_data = UNCORE_PCI_DEV_FULL_DATA(18, 2, SKX_PCI_UNCORE_M3UPI, 1),
},
{ /* M3UPI1 Link 2 */
- PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x204C),
- .driver_data = UNCORE_PCI_DEV_FULL_DATA(18, 4, SKX_PCI_UNCORE_M3UPI, 2),
+ PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x204D),
+ .driver_data = UNCORE_PCI_DEV_FULL_DATA(18, 5, SKX_PCI_UNCORE_M3UPI, 2),
},
{ /* end: all zeroes */ }
};
--
2.7.4
