From: Pavel Machek <pavel@xxxxxx>
[ Upstream commit f4efa74c09a7eddcc12cd13208f78743763f6e7a ]
Vibration GPIOs don't have anything to do with wakeup. Move it to
normal section; this fixes vibrations on Droid 4.
Fixes: a5effd968301 ("ARM: dts: omap4-droid4: Add vibrator")
Signed-off-by: Pavel Machek <pavel@xxxxxx>
Reviewed-by: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxxxx>
Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx>
Signed-off-by: Sasha Levin <alexander.levin@xxxxxxxxxxxxx>
---
arch/arm/boot/dts/omap4-droid4-xt894.dts | 18 +++++++++---------
1 file changed, 9 insertions(+), 9 deletions(-)
diff --git a/arch/arm/boot/dts/omap4-droid4-xt894.dts b/arch/arm/boot/dts/omap4-droid4-xt894.dts
index e7c3c563ff8f..edc97f89fae4 100644
--- a/arch/arm/boot/dts/omap4-droid4-xt894.dts
+++ b/arch/arm/boot/dts/omap4-droid4-xt894.dts
@@ -618,15 +618,6 @@
OMAP4_IOPAD(0x10c, PIN_INPUT | MUX_MODE1) /* abe_mcbsp3_fsx */
>;
};
-};
-
-&omap4_pmx_wkup {
- usb_gpio_mux_sel2: pinmux_usb_gpio_mux_sel2_pins {
- /* gpio_wk0 */
- pinctrl-single,pins = <
- OMAP4_IOPAD(0x040, PIN_OUTPUT_PULLDOWN | MUX_MODE3)
- >;
- };
vibrator_direction_pin: pinmux_vibrator_direction_pin {
pinctrl-single,pins = <
@@ -641,6 +632,15 @@
};
};
+&omap4_pmx_wkup {
+ usb_gpio_mux_sel2: pinmux_usb_gpio_mux_sel2_pins {
+ /* gpio_wk0 */
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x040, PIN_OUTPUT_PULLDOWN | MUX_MODE3)
+ >;
+ };
+};
+
/*
* As uart1 is wired to mdm6600 with rts and cts, we can use the cts pin for
* uart1 wakeirq.
--
2.17.1
