TI AM335x CPPI 4.1 module uses a single register bit for CPPI interrupts
in both musb controllers. So disabling the CPPI irq in one musb driver
breaks the other musb module.
Since musb is already disabled before tearing down dma controller in
musb_remove(), it is safe to not disable CPPI irq in
musb_dma_controller_destroy().
Fixes: 255348289f71 ("usb: musb: dsps: Manage CPPI 4.1 DMA interrupt in DSPS")
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Bin Liu <b-liu@xxxxxx>
---
drivers/usb/musb/musb_dsps.c | 12 +-----------
1 file changed, 1 insertion(+), 11 deletions(-)
diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c
index df827ff57b0d..23a0df79ef21 100644
--- a/drivers/usb/musb/musb_dsps.c
+++ b/drivers/usb/musb/musb_dsps.c
@@ -658,16 +658,6 @@ dsps_dma_controller_create(struct musb *musb, void __iomem *base)
return controller;
}
-static void dsps_dma_controller_destroy(struct dma_controller *c)
-{
- struct musb *musb = c->musb;
- struct dsps_glue *glue = dev_get_drvdata(musb->controller->parent);
- void __iomem *usbss_base = glue->usbss_base;
-
- musb_writel(usbss_base, USBSS_IRQ_CLEARR, USBSS_IRQ_PD_COMP);
- cppi41_dma_controller_destroy(c);
-}
-
#ifdef CONFIG_PM_SLEEP
static void dsps_dma_controller_suspend(struct dsps_glue *glue)
{
@@ -697,7 +687,7 @@ static struct musb_platform_ops dsps_ops = {
#ifdef CONFIG_USB_TI_CPPI41_DMA
.dma_init = dsps_dma_controller_create,
- .dma_exit = dsps_dma_controller_destroy,
+ .dma_exit = cppi41_dma_controller_destroy,
#endif
.enable = dsps_musb_enable,
.disable = dsps_musb_disable,
--
2.17.1
