[PATCH AUTOSEL 4.14 23/57] gpu: ipu-v3: csi: pass back mbus_code_to_bus_cfg error codes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Enrico Scholz <enrico.scholz@xxxxxxxxxxxxxxxxx>

[ Upstream commit d36d0e6309dd8137cf438cbb680e72eb63c81425 ]

mbus_code_to_bus_cfg() can fail on unknown mbus codes; pass back the
error to the caller.

Signed-off-by: Enrico Scholz <enrico.scholz@xxxxxxxxxxxxxxxxx>
Signed-off-by: Jan Luebbe <jlu@xxxxxxxxxxxxxx>
[p.zabel@xxxxxxxxxxxxxx - renamed rc to ret for consistency]
Signed-off-by: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
Signed-off-by: Sasha Levin <alexander.levin@xxxxxxxxxxxxx>
---
 drivers/gpu/ipu-v3/ipu-csi.c | 20 ++++++++++++++++----
 1 file changed, 16 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/ipu-v3/ipu-csi.c b/drivers/gpu/ipu-v3/ipu-csi.c
index 24e12b87a0cb..2bc51d4d3f1e 100644
--- a/drivers/gpu/ipu-v3/ipu-csi.c
+++ b/drivers/gpu/ipu-v3/ipu-csi.c
@@ -316,13 +316,17 @@ static int mbus_code_to_bus_cfg(struct ipu_csi_bus_config *cfg, u32 mbus_code)
 /*
  * Fill a CSI bus config struct from mbus_config and mbus_framefmt.
  */
-static void fill_csi_bus_cfg(struct ipu_csi_bus_config *csicfg,
+static int fill_csi_bus_cfg(struct ipu_csi_bus_config *csicfg,
 				 struct v4l2_mbus_config *mbus_cfg,
 				 struct v4l2_mbus_framefmt *mbus_fmt)
 {
+	int ret;
+
 	memset(csicfg, 0, sizeof(*csicfg));
 
-	mbus_code_to_bus_cfg(csicfg, mbus_fmt->code);
+	ret = mbus_code_to_bus_cfg(csicfg, mbus_fmt->code);
+	if (ret < 0)
+		return ret;
 
 	switch (mbus_cfg->type) {
 	case V4L2_MBUS_PARALLEL:
@@ -353,6 +357,8 @@ static void fill_csi_bus_cfg(struct ipu_csi_bus_config *csicfg,
 		/* will never get here, keep compiler quiet */
 		break;
 	}
+
+	return 0;
 }
 
 int ipu_csi_init_interface(struct ipu_csi *csi,
@@ -362,8 +368,11 @@ int ipu_csi_init_interface(struct ipu_csi *csi,
 	struct ipu_csi_bus_config cfg;
 	unsigned long flags;
 	u32 width, height, data = 0;
+	int ret;
 
-	fill_csi_bus_cfg(&cfg, mbus_cfg, mbus_fmt);
+	ret = fill_csi_bus_cfg(&cfg, mbus_cfg, mbus_fmt);
+	if (ret < 0)
+		return ret;
 
 	/* set default sensor frame width and height */
 	width = mbus_fmt->width;
@@ -584,11 +593,14 @@ int ipu_csi_set_mipi_datatype(struct ipu_csi *csi, u32 vc,
 	struct ipu_csi_bus_config cfg;
 	unsigned long flags;
 	u32 temp;
+	int ret;
 
 	if (vc > 3)
 		return -EINVAL;
 
-	mbus_code_to_bus_cfg(&cfg, mbus_fmt->code);
+	ret = mbus_code_to_bus_cfg(&cfg, mbus_fmt->code);
+	if (ret < 0)
+		return ret;
 
 	spin_lock_irqsave(&csi->lock, flags);
 
-- 
2.17.1




[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux