This is a note to let you know that I've just added the patch titled
usb: mtu3: fix error of xhci port id when enable U3 dual role
to my usb git tree which can be found at
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git
in the usb-linus branch.
The patch will show up in the next release of the linux-next tree
(usually sometime within the next 24 hours during the week.)
The patch will hopefully also be merged in Linus's tree for the
next -rc kernel release.
If you have any questions about this process, please let me know.
>From 78af87b8bbbbcaa613f1a7d8f14472fe9a7dc622 Mon Sep 17 00:00:00 2001
From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
Date: Wed, 29 Aug 2018 10:36:49 +0800
Subject: usb: mtu3: fix error of xhci port id when enable U3 dual role
If dual role mode is enabled, when switch u3port0 to device mode,
it will affect port id calculation of host(xHCI), specially when
host supports multi U2 ports or U3 ports, so need enable its dual
role mode, and fix it here.
Signed-off-by: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
Cc: stable <stable@xxxxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/usb/mtu3/mtu3_core.c | 6 +++++-
drivers/usb/mtu3/mtu3_hw_regs.h | 1 +
2 files changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/mtu3/mtu3_core.c b/drivers/usb/mtu3/mtu3_core.c
index eecfd0671362..d045d8458f81 100644
--- a/drivers/usb/mtu3/mtu3_core.c
+++ b/drivers/usb/mtu3/mtu3_core.c
@@ -107,8 +107,12 @@ static int mtu3_device_enable(struct mtu3 *mtu)
(SSUSB_U2_PORT_DIS | SSUSB_U2_PORT_PDN |
SSUSB_U2_PORT_HOST_SEL));
- if (mtu->ssusb->dr_mode == USB_DR_MODE_OTG)
+ if (mtu->ssusb->dr_mode == USB_DR_MODE_OTG) {
mtu3_setbits(ibase, SSUSB_U2_CTRL(0), SSUSB_U2_PORT_OTG_SEL);
+ if (mtu->is_u3_ip)
+ mtu3_setbits(ibase, SSUSB_U3_CTRL(0),
+ SSUSB_U3_PORT_DUAL_MODE);
+ }
return ssusb_check_clocks(mtu->ssusb, check_clk);
}
diff --git a/drivers/usb/mtu3/mtu3_hw_regs.h b/drivers/usb/mtu3/mtu3_hw_regs.h
index 6ee371478d89..a45bb253939f 100644
--- a/drivers/usb/mtu3/mtu3_hw_regs.h
+++ b/drivers/usb/mtu3/mtu3_hw_regs.h
@@ -459,6 +459,7 @@
/* U3D_SSUSB_U3_CTRL_0P */
#define SSUSB_U3_PORT_SSP_SPEED BIT(9)
+#define SSUSB_U3_PORT_DUAL_MODE BIT(7)
#define SSUSB_U3_PORT_HOST_SEL BIT(2)
#define SSUSB_U3_PORT_PDN BIT(1)
#define SSUSB_U3_PORT_DIS BIT(0)
--
2.18.0
