After commit e509bd7da149dc349160 ("genirq: Allow migration of chained
interrupts by installing default action") Loongson-3 fails at here:
setup_irq(LOONGSON_HT1_IRQ, &cascade_irqaction);
This is because both chained_action and cascade_irqaction don't have
IRQF_SHARED flag. This will cause Loongson-3 resume fails because HPET
timer interrupt can't be delivered during S3. So we set the irqchip of
the chained irq to loongson_irq_chip which doesn't disable the chained
irq in CP0.Status.
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Huacai Chen <chenhc@xxxxxxxxxx>
---
arch/mips/include/asm/mach-loongson64/irq.h | 2 +-
arch/mips/loongson64/loongson-3/irq.c | 13 +++----------
2 files changed, 4 insertions(+), 11 deletions(-)
diff --git a/arch/mips/include/asm/mach-loongson64/irq.h b/arch/mips/include/asm/mach-loongson64/irq.h
index 3644b68..be9f727 100644
--- a/arch/mips/include/asm/mach-loongson64/irq.h
+++ b/arch/mips/include/asm/mach-loongson64/irq.h
@@ -10,7 +10,7 @@
#define MIPS_CPU_IRQ_BASE 56
#define LOONGSON_UART_IRQ (MIPS_CPU_IRQ_BASE + 2) /* UART */
-#define LOONGSON_HT1_IRQ (MIPS_CPU_IRQ_BASE + 3) /* HT1 */
+#define LOONGSON_BRIDGE_IRQ (MIPS_CPU_IRQ_BASE + 3) /* CASCADE */
#define LOONGSON_TIMER_IRQ (MIPS_CPU_IRQ_BASE + 7) /* CPU Timer */
#define LOONGSON_HT1_CFG_BASE loongson_sysconf.ht_control_base
diff --git a/arch/mips/loongson64/loongson-3/irq.c b/arch/mips/loongson64/loongson-3/irq.c
index 2e115ab..5605061 100644
--- a/arch/mips/loongson64/loongson-3/irq.c
+++ b/arch/mips/loongson64/loongson-3/irq.c
@@ -96,12 +96,6 @@ void mach_irq_dispatch(unsigned int pending)
}
}
-static struct irqaction cascade_irqaction = {
- .handler = no_action,
- .flags = IRQF_NO_SUSPEND,
- .name = "cascade",
-};
-
static inline void mask_loongson_irq(struct irq_data *d) { }
static inline void unmask_loongson_irq(struct irq_data *d) { }
@@ -147,11 +141,10 @@ void __init mach_init_irq(void)
irq_set_chip_and_handler(LOONGSON_UART_IRQ,
&loongson_irq_chip, handle_percpu_irq);
+ irq_set_chip_and_handler(LOONGSON_BRIDGE_IRQ,
+ &loongson_irq_chip, handle_percpu_irq);
- /* setup HT1 irq */
- setup_irq(LOONGSON_HT1_IRQ, &cascade_irqaction);
-
- set_c0_status(STATUSF_IP2 | STATUSF_IP6);
+ set_c0_status(STATUSF_IP2 | STATUSF_IP3 | STATUSF_IP6);
}
#ifdef CONFIG_HOTPLUG_CPU
--
2.7.0
