[PATCH AUTOSEL 4.18 026/131] media: camss: csid: Configure data type and decode format properly

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Todor Tomov <todor.tomov@xxxxxxxxxx>

[ Upstream commit c628e78899ff8006b5f9d8206da54ed3bb994342 ]

The CSID decodes the input data stream. When the input comes from
the Test Generator the format of the stream is set on the source
media pad. When the input comes from the CSIPHY the format is the
one on the sink media pad. Use the proper format for each case.

Signed-off-by: Todor Tomov <todor.tomov@xxxxxxxxxx>
Signed-off-by: Hans Verkuil <hansverk@xxxxxxxxx>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@xxxxxxxxxx>
Signed-off-by: Sasha Levin <alexander.levin@xxxxxxxxxxxxx>
---
 .../media/platform/qcom/camss-8x16/camss-csid.c  | 16 +++++++++++-----
 1 file changed, 11 insertions(+), 5 deletions(-)

diff --git a/drivers/media/platform/qcom/camss-8x16/camss-csid.c b/drivers/media/platform/qcom/camss-8x16/camss-csid.c
index 226f36ef7419..2bf65805f2c1 100644
--- a/drivers/media/platform/qcom/camss-8x16/camss-csid.c
+++ b/drivers/media/platform/qcom/camss-8x16/camss-csid.c
@@ -392,9 +392,6 @@ static int csid_set_stream(struct v4l2_subdev *sd, int enable)
 		    !media_entity_remote_pad(&csid->pads[MSM_CSID_PAD_SINK]))
 			return -ENOLINK;
 
-		dt = csid_get_fmt_entry(csid->fmt[MSM_CSID_PAD_SRC].code)->
-								data_type;
-
 		if (tg->enabled) {
 			/* Config Test Generator */
 			struct v4l2_mbus_framefmt *f =
@@ -416,6 +413,9 @@ static int csid_set_stream(struct v4l2_subdev *sd, int enable)
 			writel_relaxed(val, csid->base +
 				       CAMSS_CSID_TG_DT_n_CGG_0(0));
 
+			dt = csid_get_fmt_entry(
+				csid->fmt[MSM_CSID_PAD_SRC].code)->data_type;
+
 			/* 5:0 data type */
 			val = dt;
 			writel_relaxed(val, csid->base +
@@ -425,6 +425,9 @@ static int csid_set_stream(struct v4l2_subdev *sd, int enable)
 			val = tg->payload_mode;
 			writel_relaxed(val, csid->base +
 				       CAMSS_CSID_TG_DT_n_CGG_2(0));
+
+			df = csid_get_fmt_entry(
+				csid->fmt[MSM_CSID_PAD_SRC].code)->decode_format;
 		} else {
 			struct csid_phy_config *phy = &csid->phy;
 
@@ -439,13 +442,16 @@ static int csid_set_stream(struct v4l2_subdev *sd, int enable)
 
 			writel_relaxed(val,
 				       csid->base + CAMSS_CSID_CORE_CTRL_1);
+
+			dt = csid_get_fmt_entry(
+				csid->fmt[MSM_CSID_PAD_SINK].code)->data_type;
+			df = csid_get_fmt_entry(
+				csid->fmt[MSM_CSID_PAD_SINK].code)->decode_format;
 		}
 
 		/* Config LUT */
 
 		dt_shift = (cid % 4) * 8;
-		df = csid_get_fmt_entry(csid->fmt[MSM_CSID_PAD_SINK].code)->
-								decode_format;
 
 		val = readl_relaxed(csid->base + CAMSS_CSID_CID_LUT_VC_n(vc));
 		val &= ~(0xff << dt_shift);
-- 
2.17.1




[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux